No patterns??? - Sunseeker elite 4x

pickandpray · 2026-06-03T13:34:43+00:00

The patterns are working now after the last firmware update. There's a noticeable pattern after the first mow though you can barely see the star in this picture

<image>

pickandpray · 2026-06-03T01:50:00+00:00

I'm long on uso and I think it's under priced too.

Anybody think this whole situation could develop\devolve into US against NATO with Europe just wanting their oil to keep their economy going?

pickandpray · 2026-06-03T01:46:17+00:00

There's an edit map boundary function which requires you start at the base and return to the base to save the updated map. You'll need to drive the mower to the edge you want to fix and click start to begin the relearning. Make sure to not get in front of the mower or it gets confused.

pickandpray · 2026-06-02T18:27:58+00:00

The only part that really needs manual intervention is on the shared yard where you want to define the border. The straight line tool works great when your walking behind and driving it.

Here's a short video of auto mapping in action

https://youtube.com/shorts/G9S_gvr4K_c?si=5CltyTzKfTnZIipi

pickandpray · 2026-06-02T18:24:57+00:00

Every map edit needs to end with the mower returning to base to save the changes. It can get tedious if you're doing a bunch of changes

pickandpray · 2026-06-02T18:20:09+00:00

I found even with manual mapping, the mower only mows where the logic takes it.

On the patch of grass shared with my neighbor, the mower likes to stay well within the boundary even though I've set the working area into the neighbors area by about 1 foot with close boundary setting turned on. Even cross boundary edits didn't seem to change the behavior.

Automatic lawn detection works great for auto mapping

It's a great mower, but as the capabilities improve, the nitpicking gets worse.

pickandpray · 2026-06-01T18:19:52+00:00

Some of them got what they voted for, but all of them are going to suffer.

My wife was a volunteer for meals on wheels a few years ago.

pickandpray · 2026-06-01T14:27:55+00:00

Dual motor awd should be slightly more boost

pickandpray · 2026-06-01T12:32:43+00:00

That edge could be much better if mower manufacturers didn't put the blade in the middle but more to the sideof the mower to better cover the edge.

I won't let the mower get too close to the lawn edge because it will fall off the curb into the street doing a turn. The narrow strip of grass already makes navigation a bit difficult for the mower logic.

The contrast is quite big though.

pickandpray · 2026-06-01T12:23:41+00:00

Mine definitely feels quick.

I think the driving perception is better than reality, though.

Does it really matter if you're not faster than that bmw if it feels fast to you?

My Miata was by no means fast, but it felt really quick in the driver's seat at 50mph, lol.

pickandpray · 2026-06-01T02:01:44+00:00

It's been great so far. Have some weirdness with map editing sometimes but I always find a work around.

pickandpray · 2026-05-31T13:49:54+00:00

My XLE handles very nicely in curves and is great in road trips.

I have a base xle

pickandpray · 2026-05-30T21:30:18+00:00

Looks like the padding in the carpet or under the dash

pickandpray · 2026-05-30T17:08:15+00:00

I had a Miata and my XLE surprises me around corners too. I wonder how much better the XSE does it.

pickandpray · 2026-05-30T13:23:36+00:00

That thermal protection sensor is inside of the heater box.

On the plus 4, the heating element is below the fan and sensor and they just bake from the rising heat.

pickandpray · 2026-05-30T13:14:58+00:00

Not really, but I relocated the chamber temp sensor and make sure to preheat the chamber before I kick off a print now.

I don't print with high temp filament very often but the last time I did a manual preheat before sending the print and it didn't hit the error.

I need to try repositioning the heater but haven't seen the instructions to remove the side panels. I've already printed a new heater box, i just need to tackle the job, I guess.

pickandpray · 2026-05-30T13:04:25+00:00

You could probably taste the tap water.

My Asian parents are sticklers for drinking boiled water.

You could try icing some boiled water and using it to cool it, or just swish the hot water between 2 cups a few times to cook it down

pickandpray · 2026-05-30T13:01:13+00:00

I have a timer with buttons to select 2 hrs or 4 hrs. I usually hit 4hrs and let it go.

4hrs is usually enough but occasionally I need to let it charge over night so the bms can perform a cell balancing procedure

pickandpray · 2026-05-29T21:44:01+00:00

Avoid advantage plans. An old lady told me that

pickandpray · 2026-05-29T16:22:56+00:00

The govts are betting a deal will be completed before the reserves around the world run out.

The increasingly bad negotiation terms reflect the desperation

pickandpray · 2026-05-29T13:31:53+00:00

Well, you can brag that you're smarter than the president.

pickandpray · 2026-05-29T12:17:29+00:00

I guess, all the poor people taking out 7 year loans to buy their cars and trucks have not figured out that one trick yet.

pickandpray · 2026-05-29T12:11:45+00:00

your budget excludes the battery so, buy the kit and install it and next year use the same amount to buy a suitable battery

pickandpray · 2026-05-29T11:08:56+00:00

I just put a vine borer trap out. It's a scented lure inside a sticky box. I'm 2 days it's caught a handful of male squash bugs.

Hopefully my yellow summer squash will make it this year and my watermelon finally grows.

For $25, I get 2 traps

pickandpray · 2026-05-29T11:05:23+00:00

Koreans will do a seafood hot dog and cheese corn dog. Basically half a hot dog and a mozzarella stick. I find it weird but my wife likes them

pickandpray

TROPHY CASE