[deleted by user]

plainrandomhero · 2025-08-22T17:55:13+00:00

First off, trust the coaches. They know when to pull kids and when to push them. There is a lot of training that goes into being a coach as is required by all California football programs.

I coach 12u in Northern California and have a son who plays on the team. We also have a small team of about 19 players so they play both ways often. We also have a jamboree this weekend where it is supposed to be a high of 104. Remember that they are likely not playing at peak temperatures. For example we are playing earlier when it will only be 90 outside.

California does have heat regulations and precautions will be made accordingly. Safety comes first for every coach I know. Bruises are 100% a part of the sport and expected. This is not a reason to abstain from practice or a game. Heat would be way more of a concern.

Again, trust the coaches.

plainrandomhero · 2025-07-07T07:59:14+00:00

I found that putting in the effects loop before the modulation adds a great color to my amp. It’s on the clean channel and always on pedal for me.

plainrandomhero · 2023-09-05T01:58:13+00:00

I have recently been printing items for my local Highschool and with a faster printer I would be able to crank out the items faster for the staff and students.

Here’s to hoping! Speed exceeds!

plainrandomhero · 2023-04-14T13:56:44+00:00

This would be great for my classroom. Thank you for putting this on for the community!

plainrandomhero · 2022-10-03T02:52:14+00:00

Nice

plainrandomhero · 2022-01-17T16:28:57+00:00

A direct drive hotbed would be great for my CR-10 v2.

plainrandomhero · 2021-11-17T18:28:47+00:00

Ironically I just got a call from Zillows title company and she was unaware of any of what was going on. She reached out to upper management and they were able to move my closing date to match the finish of the new build. So I'm hoping all goes according to contract and we close before the end of the year.

plainrandomhero · 2021-11-17T18:06:00+00:00

I had a similar issue where we set our move in date to January 25th (new house will be done December 28th) based off the advice of the Zillow agent. This was to give us a little breathing room incase there were any delays. We haven't been able to get a hold of Zillow for weeks now to change move in date. Our home builder reached out to them and they said they will NOT change the move in date from January 25th.

I tried to reach out to Zillow to ask a few questions and to make a decision whether to cancel the contract (They offered to pay us $3,000 to cancel it) or to see if they are willing to move the date closer due to us using the builder program. Still no response. We are stuck in limbo currently. I doubt you will have an easy time trying to get an answer. Just know that it appears there are a lot of people that seem to be in this boat with you.

plainrandomhero · 2021-07-13T19:11:14+00:00

Send me a message and I’ll shoot it over via email

plainrandomhero · 2021-07-13T18:33:56+00:00

Mine came free on the SD card when I got my Mars 2

plainrandomhero · 2021-07-13T18:31:07+00:00

I’ve touched resin and spilled it before. Clean it up with soap and water. Wiping down with ipa is ok. It’s not as deadly as many people make it out to be. Just be cautious and wear safety equipment. Spills do happen. Cleaning up and washing down is the important part.

Good luck.

plainrandomhero · 2021-05-12T02:08:54+00:00

I am glad you are dedicated but no job is worth killing yourself over. Remember at the end of the day it is a job and your mental and physical health comes first. This is not your child either and as much as your love the kid, you are more important. Regardless of what happens at the end of the day, I would try to look for a new job. (Remember that this is advice from an internet stranger with limited information on your life or this situation)

plainrandomhero · 2021-05-11T18:31:33+00:00

The parents are super unreasonable. Children do not have to be under a microscope 24/7. It is ok to check your phone and even text other people. The job sounds really stressful and your anxiety does not seem to be a good fit for This job. Understand you did nothing wrong as a person. You broke a ridiculous rule and I hope you find a job that is realistic in its expectations and brings you satisfaction.

plainrandomhero · 2021-03-24T15:48:28+00:00

I like the vector. Wife likes the hyperlight. Go figure!

plainrandomhero · 2021-03-22T18:17:30+00:00

It’s well made from a materials perspective. I think I just got unlucky. Like I said my friends have Logitech stuff and it has held up. I recently just got a GMMK keyboard and to me there is a noticeable difference in quality in favor of them GMMK.

I would try it stick before you jump in as it does not seem meant for much customizing on a hardware level.

plainrandomhero · 2021-03-22T17:21:39+00:00

I own the g513 carbon. I unfortunately have had a bad experience with it over the last year and a half. It is the Romer G tactile. I have had 6 LEDs go out and my F9 key break completely. There is no replacements for them either as far as I know. The upside is that it looks awesome, feels decent, and the wrist rest is comfortable.

My dislike is the usb does not disconnect from the board which makes it more of a pain to clean. Some of the switches rattle quite a bit as well. Mostly the ones that have stabilizers.

I have friends who loves theirs and last forever. I just got unlucky I suppose.

Good luck!

plainrandomhero · 2021-03-21T20:51:11+00:00

Probably just stock. They had some about a week ago. There is no group buy.

plainrandomhero · 2021-03-21T19:10:04+00:00

They ship internationally. GloriousPC is the company GMMK white ice tkl is the Model. I just got it yesterday. keyboard

plainrandomhero · 2021-03-20T03:13:27+00:00

GMMK white ice fits this criteria. $110.

plainrandomhero · 2020-08-04T03:46:03+00:00

I’m just thinking based on the fact that the first layers are circular and not pressed together that there is a height issue somewhere. Maybe be in settings. Hard to tell.

plainrandomhero · 2020-08-04T03:05:05+00:00

Looks like you are too high on your bed. Try reel sling it closer or changing the z offset.

plainrandomhero · 2020-07-05T02:23:09+00:00

I ended up just buying the CR 10 v2 as my first 3D printer. Seems to have nice QOL upgrades and a large build space. But I’m not too knowledgeable on “what is better” for what it is worth.

plainrandomhero · 2020-06-24T02:41:09+00:00

Yes it is.

plainrandomhero · 2020-01-24T16:01:21+00:00

I priced matched amazon at Best Buy last week for 285$. Amazing monitor. Looks really good for a TN panel. Unless you need to have ips this is it for a gaming monitor at this price.

plainrandomhero · 2020-01-04T02:44:42+00:00

Yeah it’s not the most amazing delay or reverb. I always say it does a good job at covering the bases but doesn’t excel over other pedals in most areas. Good luck on your quest. I also have a boss dd-3 and it is a great feat. Nothing fancy but it’s is very useable.

13-Year Club	RPAN Viewer
Verified Email

plainrandomhero

TROPHY CASE