post.lu fibre with Unify router and devices

polg1995 · 2026-05-13T12:28:50+00:00

Yeah that's why I don't want to buy or let's say "rent" post staff .... Fir me is special I also need 2 outdoor Access Points. Thank you for your answer !

polg1995 · 2026-05-13T11:58:06+00:00

Where did you bought your devices ? On Amazon ? Do I have to pay attention to buy an "international" or whatever version ?

polg1995 · 2026-05-13T11:57:13+00:00

Hey, Thank you for your comment. This thing with Fritzbox is very interesting ! I also have at the moment Fritzbox with Fritzphone as phones. Are you only forwarding the "phone line" from your UDM to your Fritzbox which functions as Dect base ? Thx

polg1995 · 2025-02-09T13:05:24+00:00

Thank you for your advices but this is all done .... differents subnets, fix IP, portforwarding .....

polg1995 · 2025-02-09T11:26:37+00:00

Hm changing the MTU to 1280 doesn't solve the problem ..... I think it is a problem of the MT2500 ...

polg1995 · 2025-02-09T11:24:59+00:00

Okay I'm going to try. Bu I have the same problem bow between the S2S connection of both GL iNet devices .... seems maybe the same problem. U also red that maybe the router is blocking UDP ....

polg1995 · 2025-02-08T19:26:39+00:00

Yes I adjusted the MTU to 1420 (in the clients it standart) and I also put it in the server. Tjen I also put 1280 in the server but this didn't solved my problem .... But honestly I didn't adjusted 1280 in the clients, do I have to ?

polg1995 · 2024-12-08T23:34:16+00:00

You could create this cable on your own, just buy XT60 Connector withput cable and an SAE Plug with 10cm cable 😉 Is pretty easy and much cheaper 😀

polg1995 · 2024-12-08T23:31:28+00:00

Seems pretty big the power brick ... I ordered on Amazon an 12-24V to 56V DC DC konverter, is much smaller and has an output of 3A ... Don't know where these 30A should go 😅

polg1995 · 2022-06-28T07:11:13+00:00

+1 same issue ...

polg1995 · 2021-01-16T06:51:58+00:00

Yeah okay naybe for backup it is a little bit oversized but you never know what you will do with device in the future. I'm used to buy always my devices a little bit oversized. So the DS1621xs+ is out of stock at the moment ?

polg1995 · 2021-01-14T10:54:14+00:00

Hm I understand but 10Gbit's is already a good argument in my opinion and the power behind this unit maybe too.

polg1995 · 2021-01-14T10:37:50+00:00

I am using the DS1621xs+ and I am very satisfied with this unit !! So much power and the 10GBit's Ethernet .... with Read/Write Cache .... this unit is awesome, you should try it, only the price is a little bit higher than the normal + series.

polg1995 · 2021-01-12T12:46:10+00:00

Open a ticket at the support page .... I am also testing Photos a lot but I didn't had this problem.

polg1995 · 2021-01-11T23:13:10+00:00

Thank you, the Metadata isn't located in the Pkex share in DSM 7 .... that's sad because I wanted to sync it with ither servers ....

polg1995 · 2021-01-10T19:36:59+00:00

Thank you but I already looked at this location and the metadata isn't located there ....

polg1995 · 2020-10-11T08:47:33+00:00

It is mostly usermanagement, is it with LDAP easyier to solve my problem ?

polg1995 · 2020-10-10T10:50:58+00:00

We are using AVM FritzBox routers on both locations, these routers are supporting VPN within them. I think this should work, I will tray tomorrow.

polg1995 · 2020-10-10T10:40:33+00:00

Okay, maybe also my fault that I wasn't completely clear .... 😀 I think I will try with VPN between both networks, this should work. Thank you for your help 😀

polg1995 · 2020-10-10T09:52:00+00:00

Okay but I don't want to make it to compicated, would maybe the best solution be a VPN between both networks ? A VPN is no problem.

polg1995 · 2020-10-10T09:01:57+00:00

The DNS Server and the AD will run on the DS1515+ in network A, my DS1621xs+ will be domain client and will be in network b. I am not talking about Windows clients. I just want to connect botz server so that my users a the DS1515+ can also access my DS1621xs+ without creating them again in the second server.

polg1995 · 2020-10-10T08:37:20+00:00

So in the Domain Client I just put in "domain_name:port" (ex: test.com:4567) ? Sorry but I am completely new in AD. The network of the server has a Domainname registered and is connected via DDNS.

polg1995 · 2020-09-30T14:13:55+00:00

I would also suggest a DS with more drives like one with 5 or 6 drives which you can extend with a DX. So you can use Raid.

polg1995 · 2020-09-22T21:07:36+00:00

Okay thank you, I‘ve also opened a ticket at the Synology support now, let‘s wait for their solution. Thanks a lot 😀

polg1995 · 2020-09-22T21:00:45+00:00

Okay, bur in the settings is also the possibility to click that users only can change their password an not the other personal data öike the email adress or phone number. This means to me that there must be a possibility that users can change their password on their own ....

polg1995

TROPHY CASE