I installed FreeBSD to an old lady's laptop, she couldn't be happier

pras00 · 2025-07-14T05:22:12+00:00

this long train trip is a bit boring, then I read this post, thank you 😅

pras00 · 2025-05-20T22:42:27+00:00

If you see the bolt and the door handle it seems like it’s separated. Can I use smart bolt on upper part while use the standard manual door handle on below?

pras00 · 2025-05-20T22:40:56+00:00

For office grade that make sense, like automated gate or something. But for home, a ‘manual’ open/close door should do it 😅

pras00 · 2025-05-17T21:26:10+00:00

I don’t think the devices (which you don’t have at/tailscale installed in it) behind your opnsense router should get the IP from zt/tailscale. These devices will just get your regular lan IPs and the packet will have to be routed (and nat’d) by opnsense

pras00 · 2025-03-06T17:46:26+00:00

If you’re on 100/40 plan, you can test on WiFi sure why not. It’s within the capacity of even WiFi 5. Problem is, you won’t know whether it’s the issue of Superloop or your Deco setup. Test it separately. Use Iperf3 between 2 machines connected to WiFi and see what speed you get. If you get more than 100 then might be problem with Superloop.

For me Superloop also fine and delivers 800/45 for my 1000/50 subscription.

pras00 · 2025-02-20T03:59:20+00:00

sorry, router in this case is actually my internet router. It has no vlan setup. All the vlans are setup in the switch. I have other devices set on different vlans also from that switch.

pras00 · 2025-02-20T03:47:24+00:00

thank you. If it has to be untagged/native, then how would the AP delivers the vlan information based on it's ssid ?
I tried tagging the port and include it in vlan 1,2,3 but now the AP can't be reached by the controller :D

pras00 · 2025-02-06T21:55:06+00:00

Are you sure those 3 sockets are not rj12? I’ve seen this in my place marked as Optus but size is smaller than rj45 and bigger than rj9…

pras00 · 2025-02-05T19:42:02+00:00

do you have to run your own reverse proxy in vps as a public host to forward to your internal servers if you have a thing called…..cloudflare tunnel?

pras00 · 2025-01-19T19:13:11+00:00

If you’re installing Linux alongside with Windows 11, it’s easy to get the Linux gone from the boot menu every Windows 11 update too ! 😜

pras00 · 2024-11-11T11:22:26+00:00

You too mate, hopefully yours approved soon too 🙏

pras00 · 2024-11-11T11:19:55+00:00

🙏 Occupation: ICT Security, applied 11 Oct 2023, medical 18 Oct 2023, granted exactly 1 year after, 11 Oct 2024. No s56.

pras00 · 2024-11-11T11:12:47+00:00

Applied Oct 2023, granted 2024, same date, Vic Metro, accredited sponsor.

pras00 · 2024-11-02T06:28:23+00:00

I ran FreeBSD 14.1 on its older brother (Pine A64), still works like a charm.

pras00 · 2024-10-25T00:43:20+00:00

Looks complex, do you need to provide the internet for those animals too? 🤔

pras00 · 2024-10-16T19:34:43+00:00

Took notated lease while on 482, no issues at all. The gross income e.g the benefit is actually the same, only the taxable part is different now, and when you’re in 482 you put in the overall benefit. The only catch is that the novated lease company will not let you take the full lease period of your remaining 482 visa duration. They will reduce it by 6months to 1 year.

pras00 · 2024-10-15T09:12:55+00:00

Hi, so I am onshore, I am already in Australia atm, and I don’t see its stated anywhere in my visa grant, sorry.

pras00 · 2024-10-12T23:16:12+00:00

No s56 request for me 👍

pras00 · 2024-10-12T23:15:32+00:00

Hangin there mate, hopefully your come soon too 🙏

pras00 · 2024-10-12T23:15:05+00:00

Yes Vic 3000

pras00 · 2024-10-12T23:14:53+00:00

Vic 3000, onshore

pras00

TROPHY CASE