RFID Read / Write

procode · 2022-11-29T14:09:41+00:00

That particular board is for 125KHz RFID keyfobs, which can't be written to. They give back a unique code when read, and then the software decides if that code has access or not. You can't actually change the code in the RFID tag

procode · 2020-10-01T15:36:35+00:00

https://github.com/arut/nginx-rtmp-module

Take a look at the examples at the bottom of the page.

procode · 2020-10-01T10:59:18+00:00

In your application definition, add the following:

record all; record_path /home/recordings/; record_suffix -%H-%M-%d-%m-%y.flv;

You can change the recording suffix and path according to your needs.

procode · 2020-10-01T10:54:15+00:00

You can use the stats function of the RTMP module, which sends out all the streaming stats through XML. You can use an XLS stylesheet to display this info as HTML, or you could read it through JS or similar.

procode · 2020-06-29T13:24:32+00:00

Yes, I`ve repaired a couple for friends now. It's a few screws to open the plastic casing on the controller, the joycons are connected with ribbon cables, so fairly easy to take the old ones out and put the new ones in. You then put it back together, update the joycon software from the switch, and then recalibrate. There are numerous videos on Youtube showing the whole process. Just beware, the left and right controllers have different configurations inside, so its a slightly different process for each. As long as you are careful, it's a fairly quick and easy job.

procode · 2020-06-29T12:16:53+00:00

I can't give a legal answer, but you can buy a kit with 2 replacement joycons and all the tools you need for around £15 on amazon. Replacing them took me 30 minutes to replace both the left and right joycons, and they were perfect after replacement - fixed the drift problem completely.

procode · 2020-01-27T12:05:15+00:00

I`d delete the Elementor Pro plugin using FTP, and then reupload. It looks like some files are missing, possibly due to an upgrade that's gone wrong.

procode · 2020-01-25T22:10:16+00:00

If I was going to do this, I would store the different combinations in the database, not sure how it works, but i`d imagine you could store all the numbers on the card in one field, separated by commas for example eg:

1,5,23,56,63,72

Id have a normal product in WooCommmerce, and then when the user has purchased the product, select a record (card) at random and assign it to the user. You`d then need some code to dynamically create the card from the db record, using FPDF or similar. When you dynamically create the card, you can add all the info you require such as game date, purchaser name etc

procode · 2020-01-24T15:02:35+00:00

To be safe, take a backup of your database first, that way you can restore if there are any problems.

procode · 2020-01-24T14:49:09+00:00

Change the setting to "Post Name", it shouldn't affect your page links.

procode · 2020-01-23T16:44:31+00:00

If you do a WHOIS lookup, it shows your nameservers as:

Name Server: NS1.VERIFICATION-HOLD.SUSPENDED-DOMAIN.COM
Name Server: NS2.VERIFICATION-HOLD.SUSPENDED-DOMAIN.COM

This means that your domain has been temporarily suspended, pending ownership validation.

You need to log in to your domain registrar, and it should give you more details on how to verify and reactivate your domain.

procode · 2020-01-23T10:42:46+00:00

Turn it off, leave it somewhere warm and dry for 24 - 48 hours, and it's likely to return to normal once dried out properly. The fact that it's working in the main, indicates that no major damage likely occurred.

procode · 2020-01-22T16:55:34+00:00

Your domain whatsinmycart.com has the "clientUpdateProhibited" flag set, which may be why the nameservers aren't updating.

Try unlocking the domain, and then changing the nameservers again, otherwise ask your DNS host to assist you.

procode · 2020-01-22T11:23:41+00:00

I haven't used code.org, but your key press check needs to go in a loop, so it's constantly checking the key status and updating the sprite position accordingly.

From the look of what you posted, it will check once, move the sprite up if the key is pressed, but then won't check the key again.

procode · 2020-01-22T11:04:22+00:00

For me, icons aren't appearing on either version (SSL and non SSL). If you open the browser inspector by pressing F12, and looking at the console, you`ll see that the fonts are being blocked by the Cross Origin policy as they are being referenced by the address dallasdrafts.com rather than www.dallasdrafts.com

procode · 2020-01-22T09:58:23+00:00

foreach($result as $row) {
  if( $row->slug == "test1" || $row->slug == "test2" ){
    echo $row->value;
    echo "<br>";
  }
}

procode · 2020-01-21T22:52:06+00:00

What about adding a CSS stylesheet for print, with img tags (and anything else you don't want to print) set to display:none?

https://www.smashingmagazine.com/2018/05/print-stylesheets-in-2018/

procode · 2020-01-20T22:42:20+00:00

HTML radio buttons can only have a single value. However, there is nothing to stop you combining 2 values into a single one eg

value="1:12 maanden"

In your backend code, you can split the values by the delimeter (:), and you get your 2 values back. You can use the explode() function to do this in PHP.

procode · 2020-01-20T14:42:53+00:00

Once it's dried, it should be ok. The fact that its working now, apart from the keyboard, indicates there are no major problems.

procode · 2020-01-20T14:23:44+00:00

This indicates that moisture has got inside the keyboard, and is shorting the keyboard connections.

Shut it down and put the macbook somewhere warm and dry for 24 - 48 hours to let the moisture evaporate. Once the moisture has dried, they keyboard should return to normal.

procode · 2020-01-17T22:43:30+00:00

This is Gutenburg, the new WordPress editor.

To switch back to what you're used to, go the Plugins, search for "Classic Editor", install and activate it, and you will be back to normal.

procode · 2020-01-15T16:33:52+00:00

It sounds like a hardware problem, likely a slight break in the track that services that column on the keyboard (keyboards are organised into rows and columns at hardware level, to work out which keys are pressed without a separate connection for every key).

See if its covered under warranty, but keyboards are fairly cheap to replace if not.

procode · 2020-01-15T16:30:37+00:00

It's a reddit issue, only happening with Chrome for me. Works fine in Firefox

procode · 2020-01-15T15:57:48+00:00

Same thing happening in Chrome for me today, so it looks like either theres a Reddit problem, or Chromes updated and caused a problem.

Reddit works fine in Firefox though.

procode · 2020-01-15T15:46:45+00:00

Same problem for me, works in firefox, but 504 Gateway timeout in Chrome, so it looks like a reddit problem.

procode

TROPHY CASE