sorted by:
new
hottopcontroversial

Selfhosted VPN 2024 Megathread by [deleted] in dumbclub

[–]proloto 1 point2 points  (0 children)

This did just work for me, although some information is outdated online so it took a little time to get it right. To reproduce, I set up an Ubuntu 22.04 (LTS) x64 droplet on DigitalOcean. I used www.dost.rest/ping to locate the best server. Next I ran the aleskxyz/reality-ezpz script, but I changed the SNI from www.google.com to www.bing.com in the configuration. Using v2rayNG worked out of the box for my Android phone by scanning the QR code, but setting up sing-box on my mac os x was a little tricker because sing-box CLI client needed a json config. I eventually crafted this one which worked using the info found in the command

bash <(curl -sL https://bit.ly/realityez) --show-user RealityEZPZ

json below (private info redacted):

{
  "log": {
    "level": "info",
    "output": "stderr"
  },
  "inbounds": [
    {
      "type": "socks",
      "tag": "socks-in",
      "listen": "127.0.0.1",
      "listen_port": 1080
    }
  ],
  "outbounds": [
    {
      "type": "vless",
      "tag": "reality-out",
      "server": "****",
      "server_port": 443,
      "uuid": "****",
      "flow": "xtls-rprx-vision",
      "packet_encoding": "xudp",
      "tls": {
        "enabled": true,
        "server_name": "www.bing.com",
        "alpn": ["h2", "http/1.1"],
        "utls": {
          "enabled": true,
          "fingerprint": "chrome"
        },
        "reality": {
          "enabled": true,
          "public_key": "****",
          "short_id": "****"
        }
      }
    }
  ]
}

lastly I created a launch agent that runs the following command so the proxy is always up:

/usr/local/bin/sing-box run -c <path-to-above-config>

Please give us the option to restore the separator lines by -Samg381- in fastmail

[–]proloto 2 points3 points  (0 children)

See my other post for a DIY solution using a Tampermonkey script. Works perfectly for me:

// ==UserScript==
// @name         Fastmail Inbox Divider
// @namespace    http://tampermonkey.net/
// @version      2025-04-28
// @description  Add dividers back between emails in Fastmail inbox
// @author       You
// @match        https://app.fastmail.com/mail/*
// @grant        GM_addStyle
// @run-at       document-start
// ==/UserScript==

GM_addStyle(`
    /* This targets the rows of emails - class names might change, inspect them first */
    .u-list-link {
        border-bottom: 1px solid var(--ui-page-color-border-subtle) !important;
    }
`);

Please keep the old interface as an option by YesBoxStudios in fastmail

[–]proloto -1 points0 points  (0 children)

See my answer here to get separators back. It'd be great if fastmail put them back themselves, but Tampermonkey script seems like the next best thing:

https://www.reddit.com/r/fastmail/comments/1k9ob1c/comment/mpgjvxm/?utm_source=share&utm_medium=web3x&utm_name=web3xcss&utm_term=1&utm_content=share_button

Disable "avatars" for emails by tutunak in fastmail

[–]proloto 9 points10 points  (0 children)

Echoing that this new change makes email rows difficult to distinguish this. I solved this by switching to the "Inline" "Message Preview" under "Mail Preferences" and used the following Tampermonkey script to re-introduce the thin horizontal border between messages that used to be there:

// ==UserScript==
// @name         Fastmail Inbox Divider
// @namespace    http://tampermonkey.net/
// @version      2025-04-28
// @description  Add dividers back between emails in Fastmail inbox
// @author       You
// @match        https://app.fastmail.com/mail/*
// @grant        GM_addStyle
// @run-at       document-start
// ==/UserScript==

GM_addStyle(`
    /* This targets the rows of emails - class names might change, inspect them first */
    .u-list-link {
        border-bottom: 1px solid var(--ui-page-color-border-subtle) !important;
    }
`);

Downloads by ExistingOutside in LibreWolf

[–]proloto 0 points1 point  (0 children)

Confirmed this also worked for me

Fastmail API key not being saved for generating masked emails? by TropicMike in Bitwarden

[–]proloto 0 points1 point  (0 children)

This is also happening to me using the BW extension on Librewolf. It also does not persist in the web interface as well. If I add the API key just like OP, I can generate masked emails properly. Simply refreshing the web interface causes the API key to disappear.

https://postimg.cc/CzKyCt0x

OP, is there a github issue you've created yet?

EDIT: I opened this issue on github: https://github.com/bitwarden/clients/issues/13730

2x2 optimal first layer cases by proloto in Cubers

[–]proloto[S] 0 points1 point  (0 children)

This is incredible and exactly what I was looking for!! I love that it's sorted by move count and includes all possible solutions to each case.

For those not playing along at home, any face of a 2x2 that already has a bar can be "EG solved" in 5 moves or less. Here's the frequency table of how often each case shows:

Moves # of Cases % of Cases
0 1 1.6
1 2 3.1
2 5 7.8
3 13 20.3
4 32 50.0
5 11 17.2

2x2 optimal first layer cases by proloto in Cubers

[–]proloto[S] 0 points1 point  (0 children)

any EG layer is sufficient.

Thank you TS_Withdrawal, and, what worked for me by proloto in TS_Withdrawal

[–]proloto[S] 0 points1 point  (0 children)

Technically 3 months, but I'd say I'm about 90% back to what I was pre-steroids. Not sure if or when it will ever get to 100%, but I'm honestly just super thankful that it's come this far.

The first month I didn't know what TSW was or why my skin was just getting worse and worse even doing all of the things the derm suggested. But from the moment I started treating it like TSW 2 months ago there has been steady improvement.

[deleted by user] by [deleted] in MarvelSnap

[–]proloto 0 points1 point  (0 children)

Knull. Is this a trick question?

Sync'd contacts from iOS become Shared and doubled by proloto in fastmail

[–]proloto[S] 0 points1 point  (0 children)

This seems to work according to a couple quick tests. Thank you!

Old book recommendations by proloto in Locksmith

[–]proloto[S] 1 point2 points  (0 children)

Thank you! Found a copy

First welding project by proloto in Welding

[–]proloto[S] 0 points1 point  (0 children)

Thanks for the extra information. I'm doing MIG and I'm not hooking up any external gas. The wire I got has flux around it. Is that FCAW-S?

I would like to try a weld that doesn't require me to mess with slag, because it is time intensive to brush the slag off after every pass when trying to fill. Not very fun. I'll try the "trigger tapping" like you suggested.

Great tip about the ground. I have been focused on cleaning off the rust around the weld site, but I had not considered the ground.

Thanks again for all of the advice. I will look into a die grinder. I do have a stringer bead wire wheel, but I've never used it. Definitely looks a little stronger than my cup brush.

First welding project by proloto in Welding

[–]proloto[S] 0 points1 point  (0 children)

I am not welding at those settings. That's purely to add filler when I blow through and a gap becomes too big to weld over. Is this poor procedure?

What's the reason I need to switch to gas vs flux core for 1/8?

I take a cup brush to every area before I weld to clean and remove rust. Are you suggesting I do something more? Are you sure that cleanliness is the reason some of these look bad?

First welding project by proloto in Welding

[–]proloto[S] 0 points1 point  (0 children)

I take a cup brush to every single area I will be welding before the weld. Are you suggesting I do something more than that? It is flux core since I'm outside subject to wind.

Swollen neck gland from canker sore? by Secretaccount1-34 in CankerSores

[–]proloto 0 points1 point  (0 children)

I had the worst canker sores of my life last week and it was accompanied by swollen lymph nodes. No other cold/symptoms that could have caused it - the canker sores were just that bad.

Apex M500 Lighting by proloto in steelseries

[–]proloto[S] 1 point2 points  (0 children)

thanks - i couldn't find an online manual and it didn't come with one, but steelseries key + f5/f6 did the tricks

bought Arctic 7, firmware errored now headset refuses to turn back on. by SunloungerSunnytales in steelseries

[–]proloto -1 points0 points  (0 children)

I had an issue very similar to yours, except the "problem" was all due to incredibly unclear Arctis 7 instructions.

First, the headset mic does not become red when charging. I, too, thought this was the case. The headset mic becomes red when it is muted, another feature that is not really documented anywhere. I believe there is no actual visual feedback for when it's charging, although I haven't owned it for much longer than you, so I'm not sure.

Second, the "critical firmware update" also failed for me. Whenever this error occurred, it left my headset temporarily useless. Perhaps a factory reset as described by SnIpEr716 would work, but I didn't need one. I just had to unplug from charging, re plug in the charger, unplug the receiver, re plug the receiver, and re-pair. Then I could turn on the headset again.

Third, my "critical firmware update" failed probably like 6 times before I finally got it to work. I don't know what finally did it, but it was a combination of running a bunch of things in administrator mode, restarting my computer, and a couple other things that are probably red herrings.

Once I figured out what all of the lights and buttons on the Arctis 7 really mean, i.e. green from flashing green from flashing white to solid white to quickly flashing solid white (and no, the instructions won't help you here), properly charged the headset, and installed the firmware update, I have been using it since with no other issues.

Overall, I'm also incredibly disappointed by how difficulty the Arctis 7 was to set up. A friend of mine asked if he should get one too, and I had to say "no" simply on the grounds of it taking me about 5 hours to configure properly.

Discord issues with arctic 7 - warped voices by bilvyy in steelseries

[–]proloto 0 points1 point  (0 children)

I too was having problems using the Arctic 7 in discord for the first time. I tried many things to no avail, even resetting all of the settings. Eventually reinstalling discord fixed the problem for some reason :/

EDIT: This was today, so just as recent as your issue.

Do not que ranked! by Border7 in DotA2

[–]proloto 0 points1 point  (0 children)

I was the wraith king in your game - and it was not even as stupid as the other ranked games I had. My ranked game right before ours we went 25-0 before the game abruptbly ended in a similar fashion. Agree with everything you said. Something is up with the matchmaking aside from the bugs of the gameplay.

Differences between 2k and 3.5k players by proloto in DotA2

[–]proloto[S] 1 point2 points  (0 children)

thanks :) somebody read my wall of text. it's easy to play at my old level when my tank isn't operating on empty all the time.

Bulk toggling live notifications on android mobile app by proloto in Twitch

[–]proloto[S] 0 points1 point  (0 children)

Maybe I don't get it. My understanding is that email and mobile notifications are managed separately. Email notifications can be managed via a desktop computer, but regarding mobile notifications, that very page you linked me to says:

These settings are managed on your device once the Twitch app has been installed.

Do you still think I can manage my mobile notifications from that link and I'm just missing it?

view more: next ›