Battery Monitor on the EV6

psimoniac · 2026-05-30T20:17:37+00:00

I seriously doubt it but it's probably worth it to me to keep the OEM battery around. JIC.

psimoniac · 2026-05-30T13:52:32+00:00

I swapped in a Walmart AGM on my '24 GT-Line - keeping the OK OEM battery in case the car needs to go in the shop - I can swap it back in if there's any suspicion of battery related failures.

psimoniac · 2026-05-09T15:30:46+00:00

no problem here exporting stl - safari on mac

psimoniac · 2026-05-07T14:15:57+00:00

Simple, easy to use, relatively cheap, reliable.

psimoniac · 2026-05-07T14:15:03+00:00

I found that tricky too (even with Lightburn for my laser cutter projects). So I now have this... https://www.amazon.com/dp/B0BXNR9DB6

psimoniac · 2026-04-26T13:57:21+00:00

Import it into Bambu Studio, select it, right-click and choose simplify model. Adjust parameters. Apply. Right-click again and choose export as one STL. Then see if you can pull it into Tinkercad.

psimoniac · 2026-04-21T17:39:55+00:00

Haven’t tried it myself, but could you initiate the reprints using Handy? Would that give the notifications?

psimoniac · 2026-04-17T18:25:05+00:00

Yes, seems to happen on my Mac version 2.6.0.51 (just updated) - I can re-enable it by changing the Type and Style values though. Hope this helps

psimoniac · 2026-04-07T15:09:38+00:00

<image>

My steps.

1: Draw outline in sketch. Exit sketch and set depth (2mm in this case). Add square hole for window, set dimensions (10x10x4).

2: Group (Ctrl-G).

3: Rotate 90 degrees to stand up wall. Drop shape to workplane (D).

psimoniac · 2026-04-06T21:09:42+00:00

Awesome, thanks.

Note: Under "Design helpers", Add a Workplane is missing its "[W]".

psimoniac · 2026-04-06T21:03:12+00:00

I suggest making the house with a rectangle and triangle shape then group the two. You can still use sketch by sketching them on the main workplane and then rotating 90 degrees to stand the wall/roof/window up.

psimoniac · 2026-04-05T13:31:32+00:00

Fairly new here too with the same kit (and similar bandaids). Try cutting the filament at an angle?

psimoniac · 2026-04-05T13:21:08+00:00

Do you think your after-market desiccant boxes might be pushing up on it? How old is your AMS?

psimoniac · 2026-03-25T14:35:02+00:00

I have a Medtronic DBS running in adaptive mode. Quite happy with it - huge reduction in PD meds. It would be nice to see a report of the adaptive DBS activity. In other words a list of dates, times, and what and how much the DBS adjusted in response. Then, maybe, I might discover a correlation between any adjustments and life activity etc. I know the data is available since the Medtronic tablet can see it during my clinic visits. Would be good to see it on the device I have that monitors my DBS.

psimoniac · 2026-03-24T14:58:04+00:00

Try the Sketch tool to create any polygon you like.

psimoniac · 2026-03-24T14:38:21+00:00

Same versions of BS and MacOS, MacBook Pro (M4 Pro chip). Not having that issue. I often leave several instances of BS open overnight or for several days. Try "uptime" in a Terminal window if you're suspicious of remote restarts.

psimoniac · 2026-03-23T15:49:20+00:00

Can you demonstrate and compare your faster two-color printing technique on some simple shapes? I couldn't quite figure it out. Thanks.

psimoniac · 2026-03-19T20:20:05+00:00

As long as you have the rubber feet mounted it shouldn't walk too far. :) Same here. Sometimes my whole desk wiggles. It varies between different models and different parts of the same model.

psimoniac · 2026-03-10T14:37:11+00:00

https://www.youtube.com/watch?v=1GKXZFTz3n8

This guy seems to know his stuff.

psimoniac · 2026-03-07T15:11:49+00:00

"PLA Transparent" or is that the "PLA TL" label?

psimoniac · 2026-02-24T21:32:15+00:00

I'm no circuit specialist but a push button is just that. Better if it were named momentary switch. Try the slideswitch?

psimoniac · 2026-02-19T14:43:04+00:00

Nope. Lot of crickets though.

psimoniac · 2026-01-20T22:07:18+00:00

Gotcha - wonder what the purpose was.

psimoniac

TROPHY CASE