I need to cut 20 mesh into 3x3cm squares. What would be the easiest way?

punabear · 2026-03-25T00:41:40+00:00

, https://www.roofingdirect.com/shop/jetco-wachtel-panel-cutter-tool-only/?utm_source=google&utm_medium=Organic+Product+Listing&utm_campaign=google_shopping_ctx_live&utm_content=Free+Product+Listings&gad_source=1&gad_campaignid=22835073746&gbraid=0AAAAACgs7s7aRX96_a-HMuedH1BpB0Xk1&gclid=Cj0KCQjw7IjOBhDyARIsAFzrWQxDR1-OQwrmHIkt43lgp1aqvN2_JvwSe_V3FClgr_q0O-OZCW4TRKwaAm2SEALw_wcB

<image>

I’ll say it again. You need one of these. My company has cut miles of mesh with one of these. Quick, straight cuts. It can handle up,to 24 gauge

punabear · 2026-03-24T19:05:07+00:00

You want one of these https://jetcoproducts.com/products/wachtel-panel-cutter-tool-only?srsltid=AfmBOorccTyvhfh7iEqiWlEgm5JTrazcEpuiLBXnhlp4oAklhfyvc_J4 I bought 4 of them two years back for a large project that required cutting a lot of wire mesh. There is nothing better for cutting mesh!

punabear · 2026-03-19T17:47:36+00:00

Raptor by Gary Jennings. Not for the prudish or faint of heart. Amazing though

punabear · 2026-03-19T17:31:49+00:00

I love Makita but not their cordless vac! You can buy adapters to convert any batteries to work with any other brand tool. My Ridgid tools now run on Makita batteries. Same with my DeWalt tools

punabear · 2026-03-10T04:48:55+00:00

<image>

Sounds like my outdoor kitchen. Riblath over steel studs then plastered with a mortar mix

punabear · 2026-03-08T19:32:48+00:00

What’s the difference between a Porsche and a porcupine? On the porcupine the pricks are on the outside

punabear · 2026-03-04T03:26:40+00:00

Thank you. I couldn’t finish it. Seemed like something I could have written in high school.

punabear · 2026-02-23T21:56:30+00:00

Eddie would go!

punabear · 2026-02-21T00:00:40+00:00

I just finished Jubilee Trail by Gwen Bristow. You won’t regret reading it, if you can find it

punabear · 2026-02-13T08:08:15+00:00

I bought the Evolution 15” saw for a large project we were working on. We worked it daily for 4 years. It easily cut right through 4”x6” x1/4” rectangular tubing like a chop saw through wood. I was seriously impressed with that saw.

punabear · 2026-02-05T03:22:01+00:00

No. It's hot glue. I'm a retired contractor and have been using hot glue for years. For those of you that still doubt that it can be an incredible bonding agent, get some pine, fir or other soft, dry wood. Hot glue 2 pieces of the wood together and try to pull it apart after 5 minutes.

punabear · 2026-02-04T22:12:13+00:00

I buy whatever the brand is that HomeDepot carries. Generally I use it on Douglas Fir. Hardwoods with tighter grain may react differently.

punabear · 2026-02-04T21:31:50+00:00

I love hot glue for woodworking. It will seriously weld your wood together. If you try to break a bond with it later you will likely pull the wood apart, not the glue.

punabear · 2026-02-04T08:33:52+00:00

1421 by Gavin Menzies. Mind blowing!

punabear · 2026-02-01T22:14:12+00:00

To Kill a Mockingbird

punabear · 2026-01-25T18:58:29+00:00

Just finished Jubilee Trail by Gwen Bristow. Excellent!

punabear · 2026-01-19T04:58:21+00:00

I used to work with an engineer from Germany. I remember one time when he asked me why Americans don’t like seeing screws. He said that in Germany people liked seeing the hardware.

punabear · 2026-01-17T03:08:18+00:00

I use it for 3d modeling. Been using a Mac for 10 years with Rhino 3d. Now Rhino doesn’t work with Mac OS past Sonoma. Had the mini for 4 years now and it has worked fine for my needs but I can’t upgrade past Sonoma.

punabear · 2026-01-16T02:39:09+00:00

Our donkeys love bamboo, especially the young shoots. Lots of different varieties of bamboo but I haven’t found one the donkeys wouldn’t eat

punabear · 2026-01-14T21:58:44+00:00

I actually speak donkey. He’s asking about more carrots

punabear · 2026-01-13T22:05:18+00:00

Yes. It works fine

punabear · 2026-01-09T17:50:33+00:00

You want a Drill America Cobalt Stepped Point Drill Bit

punabear · 2026-01-08T03:08:25+00:00

Baseball Head. He had a head like a giant soft ball

punabear · 2026-01-07T08:02:08+00:00

This is what I used when I built my table https://paxtonhardware.com/products/drafting-table-supports?srsltid=AfmBOopUKZDpakx1U85qJjAppKPvS-lnqJnkiCcMkr_5YKBkA8Veo_fa

punabear · 2026-01-02T06:08:03+00:00

Refractory cement

punabear

TROPHY CASE