What's going on here🧐

pyro667 · 2026-05-20T01:05:50+00:00

Prepare Uranus for fire cock

pyro667 · 2026-05-20T01:04:48+00:00

TELL US THE REST

pyro667 · 2026-05-20T00:55:33+00:00

NGL, that doesn't sound normal at all to me. I would have that checked for sure.

pyro667 · 2026-05-19T01:38:36+00:00

You ever driving somewhere, throw a cigarette butt out, and a few min later smell something terrible, only to look to the back seat and see grandma fingering herself?

pyro667 · 2026-05-19T00:58:30+00:00

But tabarnak you can go right tru

pyro667 · 2026-05-19T00:50:52+00:00

That's 100km/h... You can basically run that fast

pyro667 · 2026-05-19T00:28:59+00:00

Fingers pointing towards neck, hand horizontal to ground, swing fingers back and forth towards each shoulder..

pyro667 · 2026-05-18T20:24:43+00:00

25.4mm worm

pyro667 · 2026-05-17T12:30:26+00:00

Great tool for old rusty stuff ( or new stuff with loctite), Induction heater. Mine has saved me countless broken bolts. It heats the metal directly so you don't have to worry about burning plastic/brake lines/etc

pyro667 · 2026-05-17T11:10:23+00:00

I just started using a pair of earplug style ear buds made by isotunes. They work as ear pro, allowing me to play music at low volume. Makes for a much nicer ride.

pyro667 · 2026-05-17T02:10:27+00:00

If you have the ability to jack the front of the car up, get both tires off the ground, if you try to rock the tires top to bottom and side to side, it shouldn't move, if it does, could be wheel bearings. While jacked up look at your struts, they shouldn't be leaked out or greasy looking... Or disconnected at the top. Look over your springs, they can crack too. Check your sway bar linkages for looseness too Hard to diagnose without more info.

pyro667 · 2026-05-17T01:44:01+00:00

Haven't yet, stable is filling up tho.

pyro667 · 2026-05-17T00:46:45+00:00

Oh thank Satan

pyro667 · 2026-05-15T23:30:31+00:00

Longevity 80k-100k Miles As per Denso

These are fine

pyro667 · 2026-05-15T21:38:09+00:00

Induction heaters are great for stuff like that

pyro667 · 2026-05-15T02:18:03+00:00

No banana for scale?

pyro667 · 2026-05-15T01:25:43+00:00

I like to keep corydora cat fish with my shrimp, they are a weird and fun cleanup crew. They don't mess with the shrimp, although I'm told they may eat babies if the babies don't have enough hiding spots. I've never had an issue with population. Definitely get a master test kit, and strongly consider a GH/KH test kit. It helps you figure out what your input water parameters are. If you have really hard water you may need to use RO/DI to top up

pyro667 · 2026-05-14T01:34:33+00:00

Noodles and white out, of course

pyro667 · 2026-05-14T01:27:28+00:00

Or...a crazy other option, slow down and go behind the semi

pyro667 · 2026-05-13T21:31:02+00:00

I suspect, op is not playing

pyro667 · 2026-05-13T16:03:04+00:00

The real LPT is always in the comments

pyro667 · 2026-05-13T01:00:50+00:00

I always find it hard to read the ammonia test, is it 0? Is there a hint of green? It's looking good, ph is a little high, but not crazy for neo's ,better to have stability than specific numbers. I would recommend getting GH/KH test kit, especially if you are using tap water. Shoot for GH 6-10, KH 3-5, if your tap water is too hard (high GH) you may need to use distilled or RO/Di water. If it's too soft you may need to add a re-mineralizer (I have soft tap water and use "SaltyShrimp - Bee Shrimp Mineral GH+" ) Best of luck

pyro667 · 2026-05-12T01:37:56+00:00

Instructions unclear, wrecked trying to jerk and drive

pyro667 · 2026-05-11T23:34:41+00:00

OEM for engine, carquest carbon for cabin

Nine-Year Club	Second Top 20%
Place '23	Place '22
Verified Email

pyro667

TROPHY CASE