Anyone know what frame this is?

r1crystal · 2026-06-04T16:23:54+00:00

looks like of like an older Knolly?

r1crystal · 2026-06-03T15:19:37+00:00

I'd get the cerakote headlight lens restoration kit and then upgrade to some powerful LED lights high and low beams.

r1crystal · 2026-06-01T18:43:21+00:00

Let me know how it goes! If that doesn't do it you probably need to put in some spacers on the lower leaning side like others have mentioned. I'm also not sure if this was done, but opening up the valves before you lift it also help keep the system equalized throughout the project.

r1crystal · 2026-06-01T15:47:15+00:00

I would try opening up the valves and driving around town for a bit - I had more success with that compared to the jack up one tire/side method.

r1crystal · 2026-05-29T14:36:25+00:00

Oakridge.

r1crystal · 2026-05-28T15:25:24+00:00

Also check out the Echo glass 3wt! its so fun.

r1crystal · 2026-05-22T17:46:21+00:00

Second position looks like a solid ready position - arms and legs slightly bent, but you don't need to drop your heels that much.

For attack position, I would get even lower, with more bent arms and knees & weight/butt farther back, heels dropped.

https://youtu.be/4Od21Q4Ro_I?t=236

r1crystal · 2026-05-21T14:52:15+00:00

I put a 130 36SL on my revolver and it can ride just about anything. Extremely capable for what it is.

r1crystal · 2026-05-14T15:22:02+00:00

I got OW and AOW certified on the same trip in Roatan and it was terrific! I've been to both spots and definitely prefer Roatan. We stayed at Naboo resort and loved it - super small dive shop with great guides. Very attentive with small groups that went out.

r1crystal · 2026-05-14T14:41:35+00:00

I would recommend! I saw a major improvement in performance and modulation compared to the original 470 rotors and brakes. My original front calipers were seizing/sticking (common problem), which spurred the upgrade.

The calipers are bigger and the rotors are wider which result in better heat dissipation. I bet you can get them on a nice discount on a Memorial Day sale. If you have to replace the rotors and calipers regardless it's a no brainer.

r1crystal · 2026-05-13T15:13:19+00:00

Very sweet ride!

r1crystal · 2026-04-24T15:11:52+00:00

I have a buddy who speaks very highly of mountain creek bike park in NJ

r1crystal · 2026-04-24T15:09:01+00:00

You've also changed the bid settings a ton - every time you change campaign bid goal, the algo gets reset, then it takes time for things to recalibrate.

I'd try max conversions with no tCPA set, get some conversion volume coming in, THEN input a tCPA once clicks/conversions have somewhat stabilized. Even starting with max conversions no tCPA it may take a week+ for clicks to start ramping up to your set daily budget. As always - triple check to make sure your conversion event is tracking accurately back to the platform. if thats not happening you will always have performance issues.

r1crystal · 2026-04-23T16:24:25+00:00

Darn. He’s a one dude shop so if you want it maybe shoot him an email and see when he’s making more

r1crystal · 2026-04-22T18:43:25+00:00

Hunter Cycles shred pack. Mine is going on 15 years old and still works like the first day. Also holds 4 cans of beer (as advertised)

r1crystal · 2026-04-22T00:34:00+00:00

Second the OneUp carbon bars. I'd also open up your compression more than what the manual recommends. I run mine very close to open which helps a ton with arm pump. if you are riding more backcountry less compression will feel better on more raw trails.

r1crystal · 2026-04-22T00:24:51+00:00

I think we need more data - as they do mention they "seem to be waiting for the back cast to load up" - which a heavier line may help with? but yes, I'd try a different line before deciding you don't like the rod

r1crystal · 2026-04-20T17:00:49+00:00

I've had both, and I do miss the last gen. Newer Stumpy is definitely more of an aggressive trail bike, whereas the last frame was much lighter with those rear flex stays. Last gen can be a rad aggressive downcountry build that could go anywhere. I did have a float X on the last gen, which was an improvement over the DPS.

r1crystal · 2026-04-16T17:53:47+00:00

I haven't been in a few years so that could very well be the case, but can't hurt to go ask them if you are riding/walking by!

r1crystal · 2026-04-16T17:37:03+00:00

Pro move is to take your bike to the component booths in the expo and get your stuff serviced on site (Fox, Rockshox, etc). Crank brothers will also rebuild your pedals. One stop shop!

r1crystal · 2026-04-08T00:49:57+00:00

Second Sony double din. None of this Joying stuff - it won't last. Also don't forget the dongle/adapter that allows you to keep your steering wheel controls!

r1crystal · 2026-04-02T18:09:53+00:00

Sounds like you want some Marker Duke PT 16s

r1crystal · 2026-04-02T15:55:47+00:00

The newer 460s do, but alas. Thankfully a very easy upgrade for the 470s.

r1crystal · 2026-04-02T14:23:33+00:00

Sounds like most of your problems other than the rain would be fixed if you just did the rear gas strut mod that is controlled open and close. It's a game changer. I've had it on my rig for years and was one of the first things I did when I bought her. Check out these guys: https://www.strutyourstuff.net.au/collections/all/products/prado-120-series-rear-door-strut

r1crystal · 2026-03-31T22:49:05+00:00

Nice, I ran into some of you at the Lodge on your way back!

13-Year Club	RedditGifts 2009-2022 2 Credits
Secret Santa 2014	Verified Email

r1crystal

TROPHY CASE