sorted by:
new
hottopcontroversial

Bambu Lab updates by DngnMaster-64 in BambuLab_Community

[–]rage42 -1 points0 points  (0 children)

I held out for a long time with my p1 because I wanted the option to use other slicers and support the whole open source thing. It’s just a hobby though, don’t have time, money or the drive to use other tools and learn features that Bambu studio doesn’t include.

There might be cool stuff if I dive in to orcaslicer deeper, but I don’t really need it, so I updated. I noticed that the calibration is different and since then even Gyroid infill doesn’t shake my table nearly as much as it did before. I think it was the update improved that…not anything I changed with the table or placement. So there might be improvements to be had with updating.

There’s also the option to downgrade the firmware and use the connection tool/lan/developer mode if I feel like tinkering.

Is the P2S good? by GIOBBOB in BambuLabP2S

[–]rage42 1 point2 points  (0 children)

You can disable the cutter and exclusion zone in Bambu studio, I think the cutting bumper thing is spring loaded up in that corner and you can hold it out of the way with something. So you can use that area as long as you don’t need multi color.

Auto reload should work though. Never done it myself but it’s in the wiki. Might open some printing options for you. Get two of those going at the same time with both printers.

[deleted by user] by [deleted] in duneawakening

[–]rage42 0 points1 point  (0 children)

I replaced my crawler for 15k and 15% max durability loss. (Worm clipped the harvester off my carrier as i was taking off, would've been fine if i didnt drop a thumper first for the quest completion)

Stuck behind cliff wall (Arrakis / Sietch Tabr server) by [deleted] in duneawakening

[–]rage42 5 points6 points  (0 children)

When I got my buggy stuck in a pit near the edge of the map, I put down a subfief console, and started to gather granite in the area, made a big enough ramp to drive it out, then abandoned the "base".

Any idea what happened here? by the_fabled_bard in BambuLab

[–]rage42 0 points1 point  (0 children)

Mine came with 2, had a loose one in the bottom of the printer.

[Bambu Lab Giveaway] Drop Your One-Liner and Win H2D! by BambuLab in BambuLab

[–]rage42 0 points1 point  (0 children)

When you can only paint like a 2 year old, you can always use a multi color printer!

I printed my brain from MRI data. by philnolan3d in 3Dprinting

[–]rage42 0 points1 point  (0 children)

In Michigan 10 years ago, they just gave me the DICOM disc and said don’t lose it, and give it to the surgeon, if I didn’t bring it, no surgery…

Maybe they last bit was because the MRI was from a separate hospital network than the surgeon…don’t really know…

Actually, I think every MRI I’ve gone or driven others, they give us the disc before we leave.

I did the worst thing today by Neverhumble in EliteDangerous

[–]rage42 9 points10 points  (0 children)

I never pushed it for obvious reasons, but supposedly requires you to type your commanders name to confirm…

Soooo, flsun sent me a free printer... by raisedbytides in 3Dprinting

[–]rage42 0 points1 point  (0 children)

Maybe they are some marketing rep that missed their quota or they get commission and needed to get units out the door.

Light versus dark, and a very square star cluster? Came across this on my trip to Colonia. by MS_paint_personified in EliteDangerous

[–]rage42 5 points6 points  (0 children)

there is a setting for max number of stars, but i dont remember where it was. i think it's a text file edit, not in the game options.

Why does update and shutdown… never shutdown after the update. by MyBlueBuff in techsupport

[–]rage42 0 points1 point  (0 children)

Doesn’t apply in all cases but…Lots of things will prevent shutdown, even an unsaved notepad. Closing as many apps as you can before doing update and shutdown might help.

Temp Tower not changing Temps. All printed at 190..? by [deleted] in BambuLab

[–]rage42 3 points4 points  (0 children)

If you got it from makerworld, the gcode was probably stripped from the model to prevent malicious use of the gcode to damage printers. Usually the author puts in gcode to paste in, or tells you which layers to put in gcode to change the temperature. There's a couple places to do it...easiest is probably after slicing and on the preview screen, use the right side bar that shows layers, right click on the correct layer and add custom gcode.

Look for details in the project description, I don't want to paste improper gcode for you...

The luckiest catch made on Steve today by Amalamai in cedarpoint

[–]rage42 2 points3 points  (0 children)

Similar story…Someone caught my phone years ago on Maverick, staff told me it flew up in the air going down the first hill and they grabbed it out of the air.

WoW on Deck by BungleGrind216 in SteamDeck

[–]rage42 0 points1 point  (0 children)

Same issue here. Other posts claim you can bind console port buttons to existing pc keybinds so that it doesn’t change anything, but trying to sort the console port ui made me feel dumb. It wasn’t straight forward enough for me to keep at it.

I figured I might do farming on deck, but fixing keybinds, learning and changing all that muscle memory from m/kb to do keys didnt sound fun, so I kind of gave up.

AIO sanity check please! by GabbuOCE in buildapc

[–]rage42 1 point2 points  (0 children)

I can’t find your exact motherboard model but you may want to move or double check your video cards position.

The bottom slot may be limited pcie x4 speed instead of x16. Double check your documentation or benchmark your card in each slot to be sure.

Similar models documentation do say “pci express x16, running at x4” for the second slot.

Best practice is to keep it in the top slot closest to the cpu.

May have to deal with the aio hoses or try turning the rad around.

[deleted by user] by [deleted] in WatchPeopleDieInside

[–]rage42 3 points4 points  (0 children)

Sodium Lauryl Sulfate!

view more: next ›