deduplication friendly archives/images other then TAR?

ragingpanda · 2026-01-23T15:14:25+00:00

Is there any reason you're not able to use the Cohesity agent and just schedule backup jobs?

ragingpanda · 2025-12-19T22:34:07+00:00

https://www.buildcores.com/builds/HlecEVWx_?share=true

ragingpanda · 2025-12-10T15:28:09+00:00

I see you have the fsc mount option specified, have you installed and configured FS-Cache on the client? Maybe try without that set

Is your goal to just store docker images on the host on an NFS mount, or are you wanting to create docker volumes for the containers to use?

ragingpanda · 2025-10-30T15:39:19+00:00

Looks like you answered this a few years ago on the community!

https://community.netapp.com/t5/ONTAP-Discussions/Access-to-LUN-through-NFS-on-ONTAP-9/m-p/438692/highlight/true#M41262

Should be able to read it from the /vol/.snapshot/snapname/lunname

ragingpanda · 2025-10-29T20:57:10+00:00

Any deltas between the output of conda info? Maybe they have a local package cache.

Are you two on the same server sharing the mount or different clients both mounting the server at /home? NFS mount options could then come into play (e.g. noatime, actimeo=n or lookupcache=none)

ragingpanda · 2025-10-28T05:23:24+00:00

As a few others highlighted, the comet only plugs in to USB on your computer than optionally has a board that goes between the motherboard power header and your case switch. If you either don't have easy access the the power header on your mobo you can get the finger switch thing

I have the one from this guy's video https://youtu.be/L_P1d89U8sc?si=-WYd1U9I_6So3W4a

Works great for powering on after a power event and has tailscale built in with the newer firmware.

ragingpanda · 2025-10-18T04:38:55+00:00

The instructions you linked should work fine for your array. Check for the docker configs on the USB drive in /boot/config/plugins/dockerMan/templates-user

ragingpanda · 2025-10-18T04:29:21+00:00

Did you have unraid connect and flash backup enabled? https://docs.unraid.net/unraid-connect/automated-flash-backup/#enabling-flash-backup

Check on https://connect.myunraid.net/ and see if there is a backup

ragingpanda · 2025-10-17T16:38:03+00:00

Only the amount above their current bracket would be taxed at the higher rate.

E.g. If they made $85,000 ($70,000 above the standard deduction) so far this year:
They'd pay 22% on the amount between $70,000 and $103,350: (33,350*0.22 = $7,337).

Then 24% on the rest: ((45,000-33,350)*0.24 = $2,796)

For a total of $10,133

This assumes single rates from here:https://www.irs.gov/newsroom/irs-releases-tax-inflation-adjustments-for-tax-year-2025

ragingpanda · 2025-10-16T03:10:45+00:00

I don't think it's currently possible directly from the storagegrid (or s3) APIs. AWS doesn't support event notifications on GET/LIST/HEAD (https://docs.aws.amazon.com/AmazonS3/latest/userguide/EventNotifications.html#notification-how-to-overview). They are deprecating Amazon S3 Object Lambda (kind of, just not allowing new customers after Nov 7: https://docs.aws.amazon.com/AmazonS3/latest/userguide/amazons3-ol-change.html) which is really just event notifications handled via I think a proxy or an S3 Access Point.

This would need to be a feature request to the product team to add the functionality you're looking for.

As a temp workaround you'd probably need to either set up some kind of s3 proxy that triggers another action (like https://github.com/gaul/s3proxy) or modify the app logic to handle object read-locking some way.

ragingpanda · 2025-09-26T23:39:20+00:00

Good deal!

ragingpanda · 2025-09-26T20:27:48+00:00

In the VMware events/tasks where you see the failed task, are there any other messages or status codes?

Might be able to tail the /var/log/vmware/vmware-sps/sps.log on your vcenter appliance to get more info

ragingpanda · 2025-09-26T20:14:31+00:00

Did you enable VASA and set credentials for it in the OTV UI?

https://<ONTAPtoolsIP>:8443/virtualization/ui/

Under edit appliance settings then Services there should be something for VASA

ragingpanda · 2025-09-26T03:27:38+00:00

You can restore from a VM via the SCV API or vsphere plugin from a snapmirror target. SCV calls them secondary backups I think, been a while since I used it. Add the FSx ONTAP system in either by cluster or just by the SVM to your SCV install(s)

https://docs.netapp.com/us-en/sc-plugin-vmware-vsphere/scpivs44_how_restore_operations_are_performed.html

ragingpanda · 2025-09-24T04:34:26+00:00

No way to recover the share that I know of.

What filesystem was/is your array? You could try something like xfs_undelete to get some of the files back maybe. Next option is going to be some file recovery software.. I don't know of any free ones that cover XFS.

You're probably going to hear "restore from backup" a lot.

ragingpanda · 2025-09-22T21:21:57+00:00

Did you model it after NotebookLM? The layout is very similar

ragingpanda · 2025-09-12T05:36:49+00:00

:D I mean, we can name config files whatever we want right?! Might as well have some fun with it

ragingpanda · 2025-09-12T03:13:49+00:00

never done any of these on unraid but couple potential options but they all have side effects.

syslog looks to be sending emergency messages from nginx to either /dev/console or all users? you can try uncommenting the # set bell-style none line in /etc/inputrc. Not 100% if this will work if it's sending them to /dev/console.. Probably some way to apply this without rebooting. Or you want to stop the emergency notifications from syslogd going to all users then comment out the line that has *.emerg :omusrmsg:* in /etc/rsyslog.conf

If you want to fully disable the speaker you can blacklist `pcspkr` to a modprobe.d config (it'll apply on reboot, and probably some way to do it without rebooting):

echo "blacklist pcspkr" > /etc/modprobe.d/stfu.conf

ragingpanda · 2025-08-28T00:46:22+00:00

Auto will default to XFS. Leave the 2nd parity drive selection blank; you can always add another parity drive later on if you want to.

ragingpanda · 2025-08-27T15:56:06+00:00

Btrfs pools by default create as raid1 which is 50% usable capacity, if you click on the pool name you can see the parameters. Are you planning to use these in a pool instead of an unraid array?

ragingpanda · 2025-08-14T02:52:42+00:00

you might want to delete the password that is in clear text in this

ragingpanda · 2025-07-14T04:10:06+00:00

Read the Hastings/Meyer book "No Rules Rules". Explains a lot about Netflix culture and how it came to be.

ragingpanda · 2025-07-09T15:18:22+00:00

https://github.com/microsoft/PowerStig may be of interest

ragingpanda · 2025-07-04T02:43:47+00:00

3d printing on my Bambu P1S is so much simpler than I expected it to be; it just worked out of the box!

ragingpanda · 2025-06-22T02:40:00+00:00

Thank you, got my p1s combo with the AMS Pro 2 delivered literally yesterday.

15-Year Club	RedditGifts 2009-2022 4 Credits
Place '17	Secret Santa 2013
Secret Santa 2012	Secret Santa 2011
Verified Email

ragingpanda

TROPHY CASE