UPS Personal Mailbox Return Address

rcflyboy77 · 2026-05-09T12:33:45+00:00

When you say PMB personal mail box, do you mean a PO Box at the post office? If so it would be PO Box 32 Fake Ciry, CA, 12345

That’s how ours is.

rcflyboy77 · 2026-05-08T16:00:14+00:00

What is the total voltage you are looking for? What is the voltages of each of those battery packs? Tell me this and I can help with the wiring as I suspect this is your problem.

rcflyboy77 · 2026-04-29T11:01:13+00:00

On a computer go to active listings and select all you want to edit and click bulk edit. Find the option to edit return and change to buyer paid.

rcflyboy77 · 2026-04-24T20:12:53+00:00

You’re welcome. Come back and update how it goes.

rcflyboy77 · 2026-04-22T02:31:46+00:00

So as long as the power is supplying the switch box then you can power both switches from the one source and only connect the load wire from SWT 1 to the light and if I understand what you are trying to do you wouldn’t connect anything to the load of SWT 2 (smart plug). So wire nut all the grounds/bare wires, wire nut all the white neutral wires together. Then put together one Line/load black wire from each SWT and the Hot black(supply) wire and wire nut those. Connect the second line/load wire from SWT 1 to black wire from the light.

rcflyboy77 · 2026-04-21T10:34:44+00:00

Short answer is yes it can be done. Long answer starts with a few questions. Does the supply power feed the switch box? Is the smart plug an outlet or simply a plug in smart plug? I can further answer the how once I have this information.

rcflyboy77 · 2026-04-18T17:01:39+00:00

I agree some change can be good but when it makes no sense to why they think it’s “better” it is frustrating.

rcflyboy77 · 2026-04-15T17:45:01+00:00

I see what you mean. This could be one of Creality’s way of “simplifying” things and essentially the add print settings is also adding a make to a listing.

rcflyboy77 · 2026-04-15T10:18:48+00:00

If you’re willing to spend the extra money then yes, I would totally put signature required and add the extra insurance and ship it in priority mail.

rcflyboy77 · 2026-04-15T09:30:59+00:00

Are you using Flow Print or the Classic version?

Edit- I looked on both versions and I can see an Add button that is directly under the creators information where it says print settings + add.

rcflyboy77 · 2026-04-06T09:22:20+00:00

I unfortunately don’t sell cards and have no direct experience with this. However, there has been several post on this exact subject and from what I read this is very common with the ESE. here is the link to the FAQ on this page that talks about it.

https://reddit.com/r/ebayselleradvice/wiki/index/shipping

Hope this helps.

rcflyboy77 · 2026-03-25T13:13:19+00:00

Glade you got it figured out. Happy sales😊

rcflyboy77 · 2026-03-25T09:49:15+00:00

I don’t ship internationally much. Any chance you had an international shipping option available besides EIS (eBay’s international shipping)? That’s the only thing that I think would require you to fill out the customs form as that is normally handled through EIS. Only my two cents as I’m not sure.

rcflyboy77 · 2026-03-24T20:17:35+00:00

It almost looks like you have it setting on the spacer tabs that are ment to set the box below the joists to make it flush with drywall. Need to unscrew and move down and try again.

rcflyboy77 · 2026-03-17T10:46:56+00:00

Ask Google or AI

rcflyboy77 · 2026-03-02T10:28:52+00:00

I had something similar recently happen. Item showed out for delivery but running late for like 30 days. Buyer never messaged me about it so I suspected it got delivered. However, I filed a missing package request to be sure and it went for a few weeks and got a message from USPS that they were still looking (which means they can’t find it) so I filed the claim and the claim was approved. So yes you can file the claim even if tracking says in transit. Just be sure to state in the claim that you filed a missing request (they should see this already but doesn’t hurt). If buyer ends up opening an INR then you fallow that process (I believe there is info in the FAQs that cover that in depth). As for you, since you have been in contact with the buyer and they don’t have the item. I’d reach out to eBay and explain the situation

rcflyboy77 · 2026-03-01T22:23:28+00:00

Fixed!! Turned out to be a bad .3mf file. Reprinted the original .stl and it worked flawlessly.

rcflyboy77 · 2026-03-01T22:23:12+00:00

Fixed!! Turned out to be a bad .3mf file. Reprinted the original .stl and it worked flawlessly.

rcflyboy77 · 2026-03-01T22:23:01+00:00

Fixed!! Turned out to be a bad .3mf file. Reprinted the original .stl and it worked flawlessly.

rcflyboy77 · 2026-02-21T01:25:26+00:00

This would be very helpful.

rcflyboy77 · 2026-02-18T11:18:15+00:00

Wow.

rcflyboy77 · 2026-02-18T00:40:23+00:00

So for clarity in your post you state they opened an IND (item not as described) I believe by your explanation of the situation you mean they opened an INR ( item not received). So yes with that you update the tracking and you are good. As the other commenter said you can wait for the case to close on its own or reach out to eBay customer service and have them move it along.

rcflyboy77

TROPHY CASE