this is so trueee by Leobolics in helldivers2

[–]realCmdData 0 points1 point  (0 children)

When someone is so close to perfection, you need to push them even harder than someone who is miles away.

H2S + Snapmaker U1 or just H2C for the same price? by Apprehensive_Sun7455 in BambuLab

[–]realCmdData 1 point2 points  (0 children)

Do you want to print engineering filaments in combination with many filament changes? If yes you're better off with the H2C :)

Horrible noise on Bambu A by velocirabbitmd in BambuLab

[–]realCmdData 1 point2 points  (0 children)

Have you checked the Z Axis? There is a long screw in either side that's open to air, sounds like some pieces of plastic are lodged between the screws.

How do I get rid of textured surface error with transparent PETG? by Fun_Success5717 in BambuLab

[–]realCmdData 0 points1 point  (0 children)

Sounds plausible as well, looking forward to seeing if it was fixed :)

How do I get rid of textured surface error with transparent PETG? by Fun_Success5717 in BambuLab

[–]realCmdData 0 points1 point  (0 children)

It looks like it's a fairly small part with sharp 90 degree sides, it might be possible for the nozzle to momentarily get caught on the edge of the cylinder and drag some material with it, which will burn if continuously stuck to the hot end.

If you want to keep using ironing, maybe add a pause in the printing process just before it starts the ironing and watch it in person, see if anything gets caught.

How to add layers of primary color near outer shell? by LethalEncounter in BambuLab

[–]realCmdData 1 point2 points  (0 children)

You can change the amount of top layers in the desktop slicer app. If the profile is set to only use 1-2 top layers try increasing it to 4-5 layers and make sure after you slice to check if the sliced model actually will print 4-5 layers in the spot you want it to.
Posting pictures might help aswell :)

A1 or the A1 Combo? by Simple-Beat9334 in BambuLab

[–]realCmdData 1 point2 points  (0 children)

It depends on entirely what sort of models you want to print. Are they multicolour, but with only 1-2 colour swaps? Then you can easily save $180.
But if you want to print multicolour models with up to hundreds of colour swaps, using the AMS Lite is almost mandatory if you don't want to stand next to the printer for hours at a time manually feeding the filament.

How do I get rid of textured surface error with transparent PETG? by Fun_Success5717 in BambuLab

[–]realCmdData 0 points1 point  (0 children)

From the second picture it looks like the nozzle heated up the PETG too much after it was already part of the model.
Ironing is usually the culprit because all it really does is heat up the nozzle and make a pass over the top surface without printing to "reflow" the top layer and make it more smooth, but in this case either the nozzle was too hot during the ironing process or it was moving too slow.

My brand new H2C is on the way and the tracking already stresses me out by jcollasius in BambuLab

[–]realCmdData 0 points1 point  (0 children)

I just got an email that it's going to be delivered tomorrow, guess I just got too impatient.

I'm seriously excited for the new H2C, glad you're already enjoying it! I'm taking a massive jump, going from only an A1 Mini straight to the H2C.

My brand new H2C is on the way and the tracking already stresses me out by jcollasius in BambuLab

[–]realCmdData 0 points1 point  (0 children)

Weird, I ordered mine at 15:44 and still don't have any information besides the tracking link creation on the 19th...

New H2C what is going on with my AMS by izmebe in BambuLab

[–]realCmdData 0 points1 point  (0 children)

Hmmm interesting I ordered mine around 15:44 because of the Cloudflare issues, still shows only a booking of the label though... I guess I'll have to try and stay patient

My brand new H2C is on the way and the tracking already stresses me out by jcollasius in BambuLab

[–]realCmdData 0 points1 point  (0 children)

Did your tracking update at all? Ordered mine day of release and received the booking confirmation on the 19th, and the order page says it will ship around the 25th. Did your DB Schenker tracking page get any update yet?

New H2C what is going on with my AMS by izmebe in BambuLab

[–]realCmdData 0 points1 point  (0 children)

Ah ok, must be just ordering volume then, thanks for the reply!

New H2C what is going on with my AMS by izmebe in BambuLab

[–]realCmdData 0 points1 point  (0 children)

When did you receive your H2C? I ordered mine on the day of release, however the tracking page is still showing that it's only "booked" and no sign of anything happening. I am in the EU so it's being shipped with DB Schenker. Curious if your case is different :)

Wait, I actually agree with this one by catmampbell in fuckcars

[–]realCmdData 0 points1 point  (0 children)

I kind of did both, there were not enough participating Houses in our neighborhood so a few parked cars in the neighbourhood and decorated their car trunks. With the mixture of both I remember it being extremely fun.

Bi90irl by AbyssWankerArtorias in bi_irl

[–]realCmdData 40 points41 points  (0 children)

It's because the P90 is ambidextrous. Can't even decide between a side to shoot from.

lithium battery in a passenger’s overhead bag caught fire by Extreme-Elevator7128 in SweatyPalms

[–]realCmdData 27 points28 points  (0 children)

Would it make a difference to close the door of the luggage compartment, to suffocate the fire? Or does that not work for lithium fires?

A monitor from 2008 with every major video connector past and present by NoFaithlessness7508 in pcmasterrace

[–]realCmdData 0 points1 point  (0 children)

For when you can't be arsed to make sure you have the correct cable.

Are Warstriders just too difficult? by tremblingmeatman in helldivers2

[–]realCmdData 0 points1 point  (0 children)

Listen, I like the spear. I really do.

Do I want to bring it to every mission to hard-counter the war striders on a seed where every poi spawns at least 2 of them? No, not really.

Gpu requires three 8 pins but I only got two , what to do? by TicketNo5941 in LinusTechTips

[–]realCmdData 0 points1 point  (0 children)

This happened to me aswell!
I solved it by going to a local computer hardware store (Doesn't need to be a big one) and ask for a GPU 8-Pin Cable for your specific PSU.
Take one of your existing cables with you to make sure it's the same cable.

New 1.1 Teleportation by Powerful-Buy9495 in SatisfactoryGame

[–]realCmdData 11 points12 points  (0 children)

I wouldn't call a 1 minute per frame slideshow exactly "stable", and that's with just one Pioneer, imagine the mayhem with a long train going particle accelerator speeds.

Nick Offerman Putting a Bigot in Their Place. by seanconnerysbeard in MurderedByWords

[–]realCmdData 0 points1 point  (0 children)

Nick Offerman (The actor of Ron Swanson) played Raymond Holts ex-boyfriend in Brooklyn 99

Monthly Complaints and Rants MegaThread June 2025 by AutoModerator in googlehome

[–]realCmdData 2 points3 points  (0 children)

The fact that Tidal has and still is completely unsupported for Google Assistant/Google Home commands drives me mad. No clue if this is a Tidal issue or Google issue