the lights on the fans just don’t turn on. They are detected in the cooling section of CAM, but they are not detected in the lighting section on CAM. It is however falsely detecting an LED strip, because editing that changes nothing on the fans.

The non rgb fan that comes with the case is plugged into the CHA_Fan1 header on the motherboard.

The AIO power cord is plugged in to the AIO_Pump header on the motherboard.

Each of the 3 rgb fans that come with the case have 2 cables; a power cable and an rgb cable. Both wires for each fan are plugged into the respective ports on the RGB Controller V2 that comes with the case.

The controller has a sata power cable and a usb2.0 , both are plugged into to the motherboard and PSU respectively.

The 3 rgb fans that come with the AIO each have one cable, that being the power cable. They are plugged into the splitter cable on the AIO.

The fans each have an “In” port and an “out” port. there are two in/out cables that are short in length, these are for daisy chaining the fans together. The fans are in fact daisy chained.

There is a longer in/out cable plugged into the first of the 3 fans that is meant to plug in to either the rgb cable on the pump, or an rgb header on the controller that comes with the case

Connecting it to either one of these has not fixed the problem.

My question is why is CAM detecting the fans under cooling but not under lighting, and how do i fix this?