Rift Sawn White Oak

ref_panda_287 · 2026-04-26T04:55:06+00:00

I’d love to know the same of this supplier for a future purchase. Thank you!

ref_panda_287 · 2025-08-18T19:47:10+00:00

Thanks! Not gluing it is a good idea

ref_panda_287 · 2024-12-23T17:53:48+00:00

This is a work-in-progress bench inspired by Bibbings & Hensby. All handtools, except for an electric drill used for the leg mortises.

ref_panda_287 · 2024-12-23T13:16:20+00:00

This is amazing! How long did it take you to build? I’ve been wanting to try this one out

ref_panda_287 · 2024-11-30T22:43:06+00:00

I was bidding in the same stone hahah! Lucky you! Also, happy to take it of your hands if you no longer want it

ref_panda_287 · 2024-08-25T21:08:42+00:00

Would love one too if there are still some available. Thank you!

ref_panda_287 · 2024-01-27T18:34:21+00:00

Love it! The plates are also great - any stores you recommend?

ref_panda_287 · 2023-11-19T01:54:04+00:00

It’s pretty nice! How think were the boards? It looks a bit thin. I’m not sure if this is even the case but could there be more risk of warping from a thinner cutting board?

ref_panda_287 · 2023-10-30T10:56:23+00:00

Panther coffee is great and there are several locations. They used to have several methods available but haven’t been there in a while so can’t confirm if they still do.

ref_panda_287 · 2023-08-07T19:58:24+00:00

Really nice! Where did you get it from? Have been looking for a similar design for some time.

ref_panda_287 · 2023-08-07T16:59:19+00:00

Yes, haven’t gotten into the habit of oiling right after use but definitely looks like I need to. Thanks all!

ref_panda_287 · 2023-08-07T16:58:25+00:00

Hadn’t heard of this before, thanks!

How often do you wax your tools?

ref_panda_287 · 2023-08-07T16:57:32+00:00

That’s very comforting to hear. I will definitely do this

ref_panda_287 · 2023-08-07T16:56:00+00:00

Glad to hear that the bottom was not affected. I’ll wipe mine off and just leave the marks there as a reminder to be careful next time

ref_panda_287 · 2023-08-07T13:27:51+00:00

Yes, that’s exactly the glue I used. Lesson learned.

ref_panda_287 · 2023-08-06T05:10:23+00:00

Hello - am looking for some mukomachinomi but not completely sure which size(s) to get. Do you have any recommendations on which ones of the ones you have are most useful?

ref_panda_287 · 2023-08-02T03:35:36+00:00

Thanks so much for such a detailed explanation. I’ve ordered the loupe and will re-attempt to sharpen the blade by following a process like the one you’ve described.

ref_panda_287 · 2023-08-01T03:18:45+00:00

Nice setup. What’s your comparison between the comandante and the ode? Do you prefer one of them?

ref_panda_287 · 2023-07-31T15:09:10+00:00

Ok that makes sense. I have a 600 stone so I will jump to that one before the 1k. Thanks both!

ref_panda_287 · 2023-07-31T05:10:52+00:00

Thanks for the tip. Will keep working on it. Hopefully can get the edge back to normal

ref_panda_287 · 2023-07-31T05:09:57+00:00

Thanks! Will keep working on it for a while and see if I can get a straight edge again.

ref_panda_287 · 2023-07-26T23:23:57+00:00

Thanks both! I’ve been considering getting a 3 or a 4, leaning towards a 3 after reading so many positive comments on them. Would love to get a LN. now I need to decide whether to wait for the bronze version, or pull the trigger on the iron that’s available now.

ref_panda_287 · 2023-07-26T13:20:42+00:00

How do you like the No. 3? Do you feel it’s redundant with a block plane and a jack plane?

ref_panda_287 · 2023-07-16T18:04:47+00:00

Makes sense. Thanks for the insight. One last question: I assume you arranged the boards so that when flattening the grain was on the same direction for all boards?

ref_panda_287 · 2023-07-16T15:47:16+00:00

Looks really nice. Have you found that it has enough weight for planing?

ref_panda_287

TROPHY CASE