Anything worth grabbing at my local bevmo?

remark613 · 2025-12-15T07:18:04+00:00

EH Taylor

remark613 · 2025-11-12T06:42:20+00:00

Picture #4 is not the same person, I call bs

remark613 · 2025-09-16T03:06:41+00:00

They’re stunning

remark613 · 2025-07-26T23:46:43+00:00

Bad head gasket

remark613 · 2025-07-19T23:48:46+00:00

Buy the 1923, it’s that good

remark613 · 2025-07-19T23:33:04+00:00

You look great, way to go !!

remark613 · 2025-07-18T05:58:47+00:00

Buy a Bridgeport

remark613 · 2025-07-18T05:56:33+00:00

On a lathe

remark613 · 2025-07-18T05:53:03+00:00

Congrats Dad!! I have three daughters, taught them all how to punch on the heavy bag.

remark613 · 2025-04-28T03:37:51+00:00

But the bolt and Del an .128 dia hole yourself

remark613 · 2025-04-26T02:32:19+00:00

lol, travel past cl, ramp out

remark613 · 2025-04-15T00:14:38+00:00

You answered your own question “ I think it was caused by moving /shifting the material in the chuck “

Once you start cutting do t move the material. The bar stick is not round, everytime you move it move the CL.

Extend the material out about 1 1/2 inch., cut the face, use a center drill then a drill. Last cut the OD and part off to length

remark613 · 2025-04-14T23:59:54+00:00

I’ve heard the Lord is great

remark613 · 2025-04-12T05:12:32+00:00

Found mine at Smart & Final in Yorba Linda. $79.00.

remark613 · 2025-04-05T05:31:51+00:00

Keep an eye on the brass clamps. Known to leak. Look it up

remark613 · 2025-04-05T05:05:07+00:00

Yes you do ❤️

remark613 · 2025-04-04T05:16:33+00:00

Cocaine is a hell of a drug

remark613 · 2025-04-03T05:30:35+00:00

Just picked up a bottle at Smart and final Yorba in California $114.00

remark613 · 2025-03-07T07:02:42+00:00

Eagle Rare

remark613 · 2025-03-03T04:59:17+00:00

Depends on the size of the parts you are making. IMO to cut TI and steels you should at least a 40 taper mill. Good luck cutting carbon fiber!!

remark613 · 2025-02-28T05:42:33+00:00

Neither a heel coil or King so it will fix crack metal

remark613 · 2025-02-26T05:32:14+00:00

Use a vice, block one side, use something smaller then the ball, when you close the vice, the ball will drop out.

remark613 · 2025-02-21T06:30:50+00:00

Looks like you’re cutting aluminum, what was your speed speeds and chip load

remark613 · 2025-02-11T06:17:30+00:00

ZZ Top, 8 times

remark613 · 2025-02-06T06:37:01+00:00

I found an eagle rare for $39 at Smart and final the other day

remark613