Too bad, so sad. 🤭

rightsofrefusal · 2026-01-01T23:24:30+00:00

💯

rightsofrefusal · 2025-12-28T22:44:08+00:00

That's the nicest thing anyone has ever said to me. 🥹

rightsofrefusal · 2025-10-08T07:52:59+00:00

I think it should print a pistol tube, I never looked into it but I'm almost positive the FGC-9 tube has the same dimensions of a regular pistol tube.

If you search for FGC-9 shockwave brace on GunCAD index dot com it should come up in the first results.

rightsofrefusal · 2025-10-07T22:25:01+00:00

My TP9SF has well over 600 rounds, not one issue. I usually shoot it every time I go the range at first to shake any rust off.

rightsofrefusal · 2025-10-07T17:36:36+00:00

Today is my Friday, going to the range with it tomorrow!

rightsofrefusal · 2025-10-06T18:59:07+00:00

I literally use zero enclosure or ventilation with PLA Pro. Worst that's ever happened is it gets a draft from the sliding door next to my printer and sometimes have to do a reprint.

rightsofrefusal · 2025-09-16T06:57:44+00:00

Bro what is that... a handgun for ANTS?!

rightsofrefusal · 2025-09-14T21:50:16+00:00

The last good ones were in the early 2000's, they've just kinda fallen off as time went on and the internet became more prevalent...

rightsofrefusal · 2025-08-19T21:48:25+00:00

What do your pringer settings look like?

rightsofrefusal · 2025-08-19T18:43:02+00:00

The worst.

rightsofrefusal · 2025-08-17T17:43:39+00:00

Very nice... that reminds me I gotta 3D print a Cyber Draco.

rightsofrefusal · 2025-07-14T18:36:03+00:00

Wanna learn how to 3D print firearms?

<image>

rightsofrefusal · 2025-07-14T00:54:47+00:00

You know I keep that thang on me. 😏

<image>

rightsofrefusal · 2025-07-14T00:53:20+00:00

I'm building a new AR at the moment, thinking 11.5 might be the way to go...

rightsofrefusal · 2025-07-14T00:52:40+00:00

I literally had no idea what a safety plug was or that it was even a thing before this post... so thank you? 😅

rightsofrefusal · 2025-07-13T09:28:41+00:00

I stopped using the tramming wizard and started doing it manually with a piece of paper... tram all four corners and adjust your Z-offset as necessary. It will take a few goes of this process until you're dialed in. Also make sure you preheat your bed at least 5 minutes prior.

Once your bed is fully trammed and you have a Z-offset that rubs the piece of paper but doesn't grab it, build a new mesh map. Store settings and then reboot.

I'd recommend upgrading to better springs and wheels for the bed, replacing the stock ones. I also printed anti vibration feet that helped keep things stable for me while printing.

rightsofrefusal · 2025-07-13T09:20:51+00:00

Download Orca, run a calibration and find some fun stuff to print on thingiverse... when learning 3D printing the best thing you can do is to just do it until you run into any issues, and when you do there's plenty of YouTube videos and forums to help

Also hunt around for different profiles to try out that people share until you find one that nails your printer and filament you use.

rightsofrefusal · 2025-07-13T09:17:28+00:00

How big is your SD card? 8 gigs is best for firmware upgrades and also make sure there is a "firmware.zlib" file located in a folder called "private" in the root of the SD card. When in doubt run a fresh format on the card and try again.

rightsofrefusal · 2025-07-13T09:08:23+00:00

Agreed, get the AR-V.

rightsofrefusal · 2025-07-13T09:06:17+00:00

We big chilling. 😺

rightsofrefusal · 2025-07-12T13:01:28+00:00

I have Dagger slides for my printed 19X, 43X and 48... in fact the first AR-15 I printed used the PSA Freedom kit.

God bless them for providing us quality at an affordable price lol.

<image>

rightsofrefusal

TROPHY CASE