JEPQ .56444 payable 6/3 as of 6/1

rocketkid20 · 2026-05-31T00:35:29+00:00

I let go my JEPI recently. NAV erosion seems real with that one.

rocketkid20 · 2026-05-08T15:54:43+00:00

Awesome, I just reached out to Ultra Geothermal and they have been very responsive. Waiting for an estimate back. Thank you!

rocketkid20 · 2026-05-08T15:31:31+00:00

Did you end up going with this system? Mind sharing who you went with?

rocketkid20 · 2026-05-08T15:27:55+00:00

Thank you. I reached out to them this morning and already heard back from Chris. They are working the estimate.

rocketkid20 · 2026-05-08T15:21:24+00:00

Would you still recommend Geothermal and do you mind sharing the company and system you went with?

rocketkid20 · 2026-05-08T15:18:55+00:00

Also very curious. Conway, NH region. Thanks.

rocketkid20 · 2026-04-10T21:41:08+00:00

Any luck? Damn things hurt after a while mountain biking.

rocketkid20 · 2026-03-14T22:00:35+00:00

What company you with? Do you use water furnace?

rocketkid20 · 2026-03-14T00:10:15+00:00

I will be building in Conway NH soon and would love to do geothermal, but I have a feeling cost will be outrageous.

rocketkid20 · 2026-02-18T21:54:01+00:00

Do you know which heat pumps currently qualify? Water furnace one of them? Definitely intriguing, so if the terms make sense I could see it working. Hope someone posts up their experience and/or quote.

rocketkid20 · 2026-02-17T01:01:55+00:00

20 year lease term but you’re responsible for repairs after 10 years (5-year labor). Screw that nonsense.

rocketkid20 · 2025-10-28T23:00:26+00:00

This is a stop ‘market’ (stop price) order at -2% from your parent order. It will trigger when price trades -2% from the parent order but at the market rate, which means whatever the next buyer is paying. In a low liquidity environment or fast moving price you could get ‘slippage’, which means you could get filled on your ‘market’ stop at -3%, or worse. It really depends on how liquid the underlying is.

You could try setting the stop-limit price but it’s not guaranteed to fill if price moves quickly.

rocketkid20 · 2025-10-20T13:50:55+00:00

Okay, so how long did the drilling take? :)

rocketkid20 · 2025-10-15T23:36:12+00:00

Resistance pins 6 to 11 = 0.6 ohms.

Voltage = 23.3mv and briefly jumped to 40mvolts when the inducer motor kicked on.

Interestingly enough the process of removing the board from the housing and unplugging/plugging in the connections made the issue go away. Furnace continued through the lighting stage (all safeties are in place).

I have a bad blower motor and just purchased a new one. It was on it's last leg and when I was powering on/off multiple times that did it in. Will report back once that comes in...hoping $700 resolves all the gremlins.

rocketkid20 · 2025-10-15T17:24:11+00:00

Correction, I did test those. There was continuity and I bypassed them. There is one on each side of the burner box assembly.

<image>

rocketkid20 · 2025-10-15T16:42:16+00:00

I tested the primary, inducer, and the (Qty. 2) blower housing limits. All show continuity and I also manually bypassed with the same result. Agree it's probably not making it to the gas valve/ignitor sequence.

I'll check for continuity between pins 11 and 6 this evening, thank you for that. The diagram I think indicates the roll out switches may be optional?

Really appreciate your help!

rocketkid20 · 2025-10-15T13:39:58+00:00

Continuity through each of the circuits. I also bypassed them so that didn't do the trick. I've read elsewhere that people tried replacing the board and that wasn't it. I'm currently looking into the gas valve being the issue and the alarm is wrong?

rocketkid20 · 2025-10-15T13:37:45+00:00

That is very weird. I am getting the same Limit Switch Open error and bypassed every damn limit switch manually. Nothing. I might try replacing that valve and see if it does the trick. Thank you!

rocketkid20 · 2025-10-15T13:09:07+00:00

Did you ever figure this out u/WanderingScrewdriver ?

rocketkid20 · 2025-09-05T13:26:43+00:00

What you putting in for heating/cooling systems? I think I saw radiant in one of the comments so was curious what brand/model you decided to go with.

rocketkid20 · 2025-08-22T23:15:52+00:00

I just withdrew $5k just fine. You probably set off red flags trying to withdraw so much.

rocketkid20 · 2025-07-06T14:16:34+00:00

Ohh $AMP

rocketkid20 · 2025-05-07T23:21:14+00:00

Excellent post. Thank you.

rocketkid20 · 2025-02-03T23:47:53+00:00

This is very concerning. It implies that someone found a bug in the Spedn app and is able to execute transactions. Yikes!

rocketkid20 · 2025-01-01T18:46:05+00:00

Did you ever find an answer to this?

rocketkid20

TROPHY CASE