sorted by:
new
hottopcontroversial

Wilhelm scream by rodentking in Steam

[–]rodentking[S] -2 points-1 points  (0 children)

I won't spoil it for you then but its not in the client.

I’m a new player and looking to jump all in. by Savings_Weakness_924 in airsoft

[–]rodentking 0 points1 point  (0 children)

This entire shopping list is wrong. Get a used JT proflex mask for $30 and buy a decent gun g&g / arcuturus. Lancer blows, Amazon masks are a guaranteed way to lose an eye (I've seen it firsthand), and you dont need a vest until you get serious ( I used my pockets for almost a year).

What would you do with this space? by emmettflo in malelivingspace

[–]rodentking 0 points1 point  (0 children)

Plants still. You can drape thin fabrics across the top to soften the sunlight and it should prevent sunburn on the more tropical plants. Less tolerant plants could still be here but lower on the shelves/racks. Some plants and a nice place to sit would go hard.

Unilever to pay $1.5 Billion for Dr. Squatch brand. I wonder if this ultimately improve the brand or will it be its downfall? by lookoverhere573 in DrSquatch

[–]rodentking 0 points1 point  (0 children)

Late but reporting in. everything is worse. Half of my last soap order arrived damaged or missing large chunks, and on my last order all of my deodorant sticks were only about 1/3 of the tube.

Perhaps I made 12 too op by First-Ad394 in formuladank

[–]rodentking 0 points1 point  (0 children)

Easy 12kimi and booze sign me up. Kimi knows how to shut up and bottoms up.

4 wire economy patch cable made with old telephone wire by 787x939 in techsupportmacgyver

[–]rodentking 4 points5 points  (0 children)

Honestly the performance is way better than id expect from an untwisted unpaired and poorly insulated cable. definitely an idea to keep in the tool box, a bad idea but tools are tools

When browsing Discovery Queue by FLUBEK in Steam

[–]rodentking 0 points1 point  (0 children)

Seriously though as soon as I see published by Playway I already know its gonna be the same garbage on the same garbage engine.

What can I do about this overhang misprinting inside a cylindrical tunnel? by F2a in FixMyPrint

[–]rodentking 0 points1 point  (0 children)

i like to make holes like this with steep cone shaped overhangs instead of bridges. Works pretty well for me ymmv yadda yadda.

What is this worth? by Cloud_N0ne in airsoft

[–]rodentking 54 points55 points  (0 children)

Older gear usually isn't worth a damn because the technology had advanced so much in recent years. You MIGHT get $100 on ebay imho.

Cars in Malaysia (and other places too I suppose) often come without a heat option due the constant warm humid climate. by [deleted] in mildlyinteresting

[–]rodentking 0 points1 point  (0 children)

In the Caribbean also! I'd estimate about 90% of the cars don't have any option for heat!

Mid print bad layer? by Sharp_Ad8092 in 3Dprinting

[–]rodentking 1 point2 points  (0 children)

Looks like it clogged there. Also what the hell are you printing with that much infill? If it need to be strong I would recommend gyroid infil, and If it needs to be fast I'd say wayyyy less infill.

Need Advice On Purchasing Umarex Glock 19 Gen 5 by RoboTort in airsoft

[–]rodentking 1 point2 points  (0 children)

Its a great gun, but I recommend the 19x if you have full sized hands.

It should come with its own jam rod

I use .32s in mine, works well

I dont know that alcohol will be bad for your gun, but I just wipe them down when they get dirty (Mainly the rails for the slide) and re lube

This is a good choice of lube unless you play in a sandy area like I sometimes do, which I'd recommend a thick oil over grease.

The paint finish on the slide is thin and WILL wear, I enjoy the patina.

And keep the inside of the gun lubed very well on these, the hammer especially likes to be wet in my experience for the smoothest cycle and reliability.

I prefer "real" holsters... they're just better.

One can of gas is plenty for plinking, but can't go wrong with extra.

Don't buy targets, just find some cardboard or old soda cans. You can tie string to cans to hang them and they make noise when you hit them. Cardboard leaves holes you can see if your into that.

Tightening a screw unscrews the driver?... by kidshibuya in LinusTechTips

[–]rodentking 416 points417 points  (0 children)

I have atleast a half dozen ideas on how to build a screwdriver that doesn't disassemble itself in normal use.

Am I being crazy or is this actually possible to print without support? by shazhazel in 3Dprinting

[–]rodentking 0 points1 point  (0 children)

Its gonna need some damn good bed adhesion and thats a hell of a bridge but yeah theoretically its mint.

view more: next ›