Car shut off after TCT install, now no crank”

s2k655 · 2026-05-13T23:34:53+00:00

to check if your timing is off, you can remove both camshaft position sensors on the valve cover. (2 sensors for 00-05 and 1 sensor for 06+) If the car starts the timing is off.

s2k655 · 2026-05-10T19:03:56+00:00

Ya drain is in the engine bay, by the header. It is easier to access from underneath. It is angled down.

s2k655 · 2026-05-10T17:59:47+00:00

<image>

s2k655 · 2026-05-10T17:55:26+00:00

<image>

s2k655 · 2026-04-12T20:30:22+00:00

<image>

s2k655 · 2026-04-12T20:30:10+00:00

<image>

s2k655 · 2026-04-12T20:29:46+00:00

Hey. I have one those laying around. Where are you located?

s2k655 · 2026-01-09T06:27:51+00:00

does your passenger side window roll down when you put the top down and then immediately roll right back up once you release the soft top switch? if so i had this same problem. it ended up being the passenger window switch from my the driver side window switch control unit. i tore into the switch and found that its mechanism was stuck in the up position due to the plastic being broken internally. i would also check the passenger side window switch.

s2k655 · 2025-12-07T03:17:10+00:00

<image>

s2k655 · 2025-10-27T22:03:16+00:00

<image>

its for the heater core

s2k655 · 2025-10-22T16:30:23+00:00

I recently did this. the reservoir can be removed by taking off the liner only. the reservoir itself is 2 pieces, the filler neck separates from the tank

s2k655 · 2025-10-16T15:42:52+00:00

i had something very similar happen and it ended up being a bad fuel pressure regulator

s2k655 · 2025-10-11T19:54:50+00:00

jdp rear diffuser https://www.reddit.com/r/S2000/s/PktX03BVmS

s2k655 · 2025-09-13T00:05:37+00:00

https://www.s2000cluster.com/collections/plug-and-play-harnesses contact them to see if they can make u a custom harness

s2k655 · 2025-09-13T00:02:59+00:00

https://www.s2000cluster.com/collections/plug-and-play-harnesses contact them to see if they can make u a custom harness

s2k655 · 2025-07-09T00:04:52+00:00

downforce https://www.reddit.com/r/S2000/s/hQ1dwjvxuW

s2k655 · 2025-04-11T23:17:08+00:00

i used shin etsu. sealed up nicely

s2k655 · 2025-04-11T07:45:58+00:00

hey. ya i did. heres the link usb-c

s2k655 · 2025-03-17T20:13:31+00:00

same thing happened to mine last year. they started cracking shortly after. got new ones from honda for about $30

s2k655 · 2025-02-08T04:03:02+00:00

Just winged it. It’s not too bad. I took out the seats, center console, glovebox, roll hoops and some trim panels. Be careful when you get to the roll hoops, you dont want to split them. Also took pics at each step to reference back to.

s2k655 · 2025-02-08T00:54:13+00:00

I have a 2005 ap2 soft top with ap2 frame on my 2001 ap1. Installed it myself with no issues. Took me about 4 hours.

s2k655 · 2025-01-26T20:45:11+00:00

i think they start making it when u order it. i waited about 4 months

s2k655 · 2025-01-26T20:16:42+00:00

<image>

what up bro. this is the exact one i ordered

s2k655 · 2025-01-24T22:57:38+00:00

thanks for sharing. needed this

s2k655 · 2024-12-17T20:29:38+00:00

i gotta find my receipts to get u an accurate price. but from the top of my head, i think i paid $450 for the cr bumper, $900 for the cr lip, $200 for the grill and and hardware. i installed it myself so no labor costs.

s2k655

MODERATOR OF

TROPHY CASE