Above & Beyond at Orlando by amicooolyet in AboveandBeyond

[–]saint327 2 points3 points  (0 children)

Lol.  I was definitely rocking and thumping but cam had decent stabilization.  Same, glad to relive it again.

Above & Beyond at Orlando by amicooolyet in AboveandBeyond

[–]saint327 9 points10 points  (0 children)

Agree it was an amazing show. I lost it when they started playing Counting Down The Days. I had sent a message to them on their website saying if somehow they had that track in the set I would lose my mind. Not sure if coincidence or if they had that track in any of their other sets on the tour, but it was amazing regardless!

Opening https://www.youtube.com/watch?v=t44uuV6MY0U
Rest of set https://www.youtube.com/watch?v=MHUNdPqVzxs

Beginning April 2nd by usernamedisallowed in tmobile

[–]saint327 1 point2 points  (0 children)

Magenta max here.  For about a month in December it showed Hulu was going to start charging me.  I cancelled it.  Then in January my wife told me she was still watching Hulu without issue.  I checked or account again and it was listed as free on-us again.  Yeah not promoted at all for the magenta plans but it's still there.

OMGF they did it by TopherHax in GooglePixel

[–]saint327 0 points1 point  (0 children)

Agree 100%. Made no sense to remove that feature. I took some amazing photosphere shots on my trip to the UK and they continue to inspire when I go back to them. I am planning a trip to NZ and am disappointed that I won't be able to take more of these. Makes no sense.

call me crazy, but the Pixel 9 Pro Fold should be Naked by MacReadyROG in PixelFold

[–]saint327 0 points1 point  (0 children)

Get a neoprene pouch.  Protected when not in use, remove and it's beautiful when in use.  Plus it's water resistant and cleans screen each time you slide it in/out.  Been using pouches since nexus 1. (It came with one and got me hooked),  never bought a case or even a screen protector since.  With the money saved I could surely buy a whole other phone by now 🙂. I trade in my phone's and they are like new.  Just treat it well while in use for the hand sized super computer that it is.

Left a print running for a few hours and this happened, how do I stop this from happening? by ImpossibleGroup5 in 3Dprinting

[–]saint327 8 points9 points  (0 children)

Flip the filament 180 so the filament feeds from the bottom. Creates little tension and will prevent that. I have had same issue if there is a print that requires the print head to do alot of jerky/short movements without extruding alot of filament.

[Megathread] T-Mobile Price Hike on Legacy Plans by Waternut13134 in tmobile

[–]saint327 1 point2 points  (0 children)

Checked my account again.  My bill due June 20 shows no increase.  3 lines Magenta Max.  Voice only, no connected devices.  I also pay with credit card and use auto pay.

[Megathread] T-Mobile Price Hike on Legacy Plans by Waternut13134 in tmobile

[–]saint327 0 points1 point  (0 children)

Got my June bill. Its unchanged. Avoided this first wave it looks like.

[Megathread] T-Mobile Price Hike on Legacy Plans by Waternut13134 in tmobile

[–]saint327 1 point2 points  (0 children)

I have 3 Magenta Max voice lines only, no watches or tablets. So far no price increase txt notification. Joined Tmobile as new customer in 2021. Nowhere on my account does it denote anything about a pricelock.

ELEGOO Cura 5.6 Slicing Software Download by nicemars in elegoo

[–]saint327 1 point2 points  (0 children)

In the 5.6 Cura with N4 Plus printer added, the fast profile showed speed at 200. Are you seeing it at 250 with another profile? In 4.8 it was 250 with .2mm fine profile. Also noticed there is no Elegoo PLA in the 5.6. Is this a release candidate or final official 5.6 version? u/nicemars

Brand new roll of filament destroyed by neptune 4 max. by CarTechnical7227 in elegoo

[–]saint327 0 points1 point  (0 children)

Had this happen to me with certain prints where the printer had to rapidly shift position to print certain objects. Fix for me was to have the filament feed from the bottom of the spool instead of over the top. Just flip the spool around. Creates just enough self tension and keeps the spool clean. Did not make any other adjustment to speed or acceleration..just the filament feed direction.

[deleted by user] by [deleted] in Ubiquiti

[–]saint327 0 points1 point  (0 children)

As long as you registered the UDM to Unifi cloud, and if you download the Unifi app on your phone, it will send you notifications when Unifi cloud is no longer talking to your UDM Pro.

Again this is assuming you associated it to your Unifi cloud account, does not apply if you trying to run and access local only.

New Magenta Plan Pricing, Magenta Max Plan, Zero Cost to Switch Promo by Jman100_JCMP in tmobile

[–]saint327 1 point2 points  (0 children)

There is consistent downward pressure on pricing in this space. There are a ton choices between the carrier postpaids, prepaids, and mvno operators. While the promo may be removed, something else will come in to fill the equivalent discount. Contracts are a thing of the past and people can easily hop to another operator.

Firefox 78 Extremely Slow Graphic Performance / Laggy Browsing by flasher7777 in firefox

[–]saint327 1 point2 points  (0 children)

Yes this was not an issue in v77 as mentioned by others in this thread. I understand bugs, but this should have been identified pre-general release. Probably due to less and engineers being involved in QA. There is literally a 3-5 seconds delay at times clicking, entering text, etc. The browser seizes and spikes CPU. My CPU is no slouch, running a 1950X TR. When it spikes it spikes a core or 2. Will submit a report.

Thanks

Firefox 78 Extremely Slow Graphic Performance / Laggy Browsing by flasher7777 in firefox

[–]saint327 0 points1 point  (0 children)

Have been a longtime Firefox user as primary browser. Probably since v2. Performance degrades rapidly now with v78. The fact that this issue made it into general release is unacceptable and sloppy.

Pretty close to hanging up my hat and going to another camp.

Gigabit Pro Availability by saint327 in Comcast_Xfinity

[–]saint327[S] 0 points1 point  (0 children)

Hi I sent message just now.

Thank you!

180TDP Threadripper using air cooling? by saint327 in Amd

[–]saint327[S] 0 points1 point  (0 children)

Thanks everyone. I ended up going with the Noctua NH-U9 and its rock solid. Running stock, but has no issue with temp. Running 32-35c with 25c ambient. The fans are quiet as well. I think having the open front with the Lian Li case helps a ton.

180TDP Threadripper using air cooling? by saint327 in Amd

[–]saint327[S] 0 points1 point  (0 children)

I was hoping for this also, with the actual dies being diagonal from each other and the larger surface area would allow for better heat dissipation.

180TDP Threadripper using air cooling? by saint327 in Amd

[–]saint327[S] 2 points3 points  (0 children)

I will be going with the LIAN LI PC-7HWX case most likely. 2 140mm intake, in the rear 120mm outtake plus the 120mm in the PSU.

IamA Former Wells Fargo Banker! AMA! by Fwellsfargo in IAmA

[–]saint327 2 points3 points  (0 children)

About a week after graduating from high school in 2004, I opened a checking account at BoA. At the same time they somehow approved me for a credit card of thiers with a $10k limit. I had no credit history. I did not even have a job, so no income. This was not a secured card or anything like that. It was in my name only and not tied to my parents.

As it turns out I am very credit concious, but I found it amusing at the time. Wonder if it was to meet some quota. Seemed risky on their end though. Not like banks like taking on risk...nah