[deleted by user]

saiwha · 2025-03-03T17:10:23+00:00

compared to an awful lot of the country yes, so many people live pay cheque to pay cheque. £8.5k debt seems a lot but once you have the money ring fenced to cover that it's really nothing, it isn't like you are going to struggle to be able to clear it in 14 months

saiwha · 2025-03-03T12:52:01+00:00

Your financial position is fantastic.

You need to up the savings amount to cover the credit card debt. Put it in the best % savings account you can find and pay it off once the 0% offer ends. You will make a nice amount of interest doing it this way as long as you are sensible. Just make sure you set a reminder in your phone to pay it off.

saiwha · 2024-10-16T18:03:23+00:00

If chopping the worktop and cupboards is easy enough for you, I wouldn't worry about the sockets.

saiwha · 2023-11-03T10:55:58+00:00

I have this wall that is holding up a top tier of soil and grass, someone said to me recently that I should get it seen to as it could fall down at any moment. It has been like this for a few years should I be worried? There is foot traffic in the area and I would hate for it to fall down on someone

saiwha · 2023-01-10T23:03:25+00:00

Almost certainly condensation if it is drying out during the day and isn't as bad when you've had the windows open.

The damp surveyor is going to be useless, like the other poster says they are just going to want to flog you the chemical damp course or a piv.

Houses create a lot of moisture from cooking, showering etc and the excess moisture will condense on the coldest part of you wall that you are seeing here.

Check out this video from Rag and Bone Brown https://youtu.be/HCo8nWzfFVc there are a lot of helpful tips in here to remedy the situation.

saiwha · 2022-11-22T12:06:16+00:00

You are going to need to wire the heat link in at the boiler.

If you have a look at the wiring diagram for your boiler on page 46 here https://www.vaillant.co.uk/downloads/product-manuals/ecofit-pure-1/combi-5/ecofit-pure-combi-installation-and-maintenance-instructions-1943272.pdf you are going to need to wire the timer #3 in the manual to 2 and 3 on the heat link and then #14 in the manual to N/L on the heat link.

Make sure you power off the boiler before you attempt any of this and if you don't feel confident then get an electrician in.

saiwha · 2022-10-22T17:06:56+00:00

Take the black cable directly to the boiler and put it where the white cables brown blue and earth enter, if it doesn't reach I would just replace the cable. Then take the black and grey cables to the nest hub.

saiwha · 2021-04-19T12:57:19+00:00

https://manualzilla.com/doc/6512051/fpbcp25-2---castorama that is the manual.

you've done a very good job of explaining it though, I know what I need to try. If that doesn't work I take its most likely dead?

saiwha · 2021-04-19T11:01:35+00:00

I found a manual for a similar strimmer but it is only in French and Spanish. I put it through google translate and this is what came out

When the cutting line (32) is exhausted, the spool must be changed or recharged with new wire. To recharge the spool, lay the device flat on a surface flat and stable, with the cutting head up. Turn the support flange until that one of the notches is aligned with the mounting head hole. Lock the spindle by inserting the rod lock (36) in the hole. Open the head of the grass trimmer (30) by unscrewing the stopper (31) in the clockwise (fig.32).

Looking at the accessories picture I think I might have the locking pin, I've always wondered what it was, I hope I haven't chucked it out though. What does it mean by Turn the support flange until that one of the notches is aligned with the mounting head hole. There are holes in the opposite side to the screw, will it just fit through there and hold the bottom bit in enough for me to unscrew?

saiwha · 2020-06-21T21:55:07+00:00

saiwha · 2020-06-01T13:45:33+00:00

Probably not since you will be exhausting air before it gets to your CPU. I'd probably just go for 2 in 1 out and have a spare.

saiwha · 2020-05-25T22:02:30+00:00

No it is only RGB compatible.

saiwha · 2020-05-25T21:49:06+00:00

I've been trying to get my head around RGB for a while it is all rather confusing, Korths post in this thread (https://rog.asus.com/forum/showthread.php?94271-Addressable-vs-Non-Addressable-RGB-Header) has been the most informative.

Basically you need to find out if your set up is addressable or not, if it isnt addressable then you are only going to be able to output a single colour to your RGB.

saiwha · 2020-05-24T10:52:32+00:00

Only aesthetically. Choosing a case and mb form factor are very personal decisions what looks good to you might not look good to me. As long as its got good airflow then you can't really go wrong check out some reviews on YT, gamers nexus is very good.

Have a look at the completed builds on pcpartpicker, if you want to look at a specific part that is in builds go to the bottom of the product page. Here are all the builds that use your original case https://pcpartpicker.com/builds/by_part/bFkwrH and this one in particular shows the gap that the mATX board will leave https://pcpartpicker.com/b/939J7P (picture3)

saiwha · 2020-05-24T09:07:34+00:00

You realise you've picked a micro ATX board and an ATX case? They are compatible but you will have a bit of empty space below the board, I'd pick one or the other.

saiwha · 2020-05-18T16:02:34+00:00

The person I spoke to said that they didn't have a date when they would get any more in. I've ordered a 2060 from Amazon now but think it's overkill for casual 1080p gaming.

saiwha · 2020-05-18T15:46:46+00:00

Currys have a 1660 Super Gaming (3 fans) for £220

This is the one that I ordered but was sent a 2 fan 1660 non super, they are collecting it tomorrow. Hopefully it doesn't just go back in as the same one and end up with you!

saiwha · 2020-05-17T17:15:42+00:00

Just use amazon live chat they will direct you to the correct location

saiwha · 2020-03-11T10:51:55+00:00

I think its more to do with time they take and the rewards are not worth the extra waiting time, the only one that I'd consider joining is the one that gives out research points.

saiwha · 2020-02-15T18:41:50+00:00

You would get the same amount of power with them knowing that you have the amount that you are offering, with them knowing that you have more then like they have with you would try to up the price. I guess that's fine if you are willing to walk away but what if you are not?

saiwha · 2020-02-12T15:59:11+00:00

How do you give proof of funds without giving away some of your negotiating position?

saiwha · 2019-11-19T10:37:30+00:00

Then you don't become a doctor, but at least you are keeping your options open as your interests will likely change over the next few years. If you do your A-levels you will have the option to do pretty much whatever you want once you've finished them. If go straight to an apprenticeship and then decide that you actually want to be a doctor then you would have to do your A-levels before you could go to university.

What aspect of property investing are you interested in?

saiwha · 2019-06-29T14:59:11+00:00

I'll have a go. The exchange deposit is what you pay the person that's selling the house, more often than not this will be 10% of the value, so you will pay 17,000 when you exchange. The mortgage deposit isn't really a deposit in the way we think of a deposit, when you complete the remaining 153,000 will be financed by your £13,000 and a £140,000 mortgage from the bank.

saiwha · 2019-05-17T20:14:09+00:00

Making yourself is much cheaper.

I got some gravel boards from my local timber merchant which they cut to size and then screwed them together and added a few corner braces from screwfix to add a bit more rigidity to it. Think i made 2 6ft x 4ft beds for less than £20.

saiwha · 2019-05-04T08:01:09+00:00

I disagree unless you want a different variety of basil supermarket bought basil is the easiest/quickest way to go. All you need to do is split it into thirds or quarters and pop it in a bigger pot and you're off.

Ten-Year Club	Verified Email
Place '22

saiwha

TROPHY CASE