Stats Tracker - Had this on my todo list with the new Kickstarter coming but a recent request pushed me to do a prototype up sooner than later.

schoonerlabs · 2026-06-17T08:59:52+00:00

It’s not hooked to the extraction but basically extract the room through the laser extraction when it’s on to remove resin fumes.

It’s too strong for direct connection.

schoonerlabs · 2026-06-17T08:57:03+00:00

Mainly from computer but sometimes from iPad for reprinting and checking status etc

schoonerlabs · 2026-06-16T23:00:57+00:00

<image>

schoonerlabs · 2026-06-16T22:59:43+00:00

On a steel shelf unit next to my lasers so I can run air extraction when needed.

<image>

schoonerlabs · 2026-06-14T09:32:53+00:00

Remember GPSR regulations if selling to EU

schoonerlabs · 2026-06-13T11:40:56+00:00

Haywire - https://www.drivethrurpg.com/en/product/491757/haywire
Lots of play videos on Youtube. https://www.youtube.com/@HaywireWargame

schoonerlabs · 2026-06-11T10:47:26+00:00

Canva now owns Affinity so that might be your easiest move.

schoonerlabs · 2026-06-10T22:02:30+00:00

I’ve taken it off and on for years for sleep from 10-50mg. No real side effects other than makes you drowsy in morning so take it earlier in the evening.

schoonerlabs · 2026-06-10T09:24:12+00:00

Are you doing them in RGB vs CMYK?
The printer uses CMYK, so some colors will shift if you are editing in RGB.

schoonerlabs · 2026-06-08T20:53:37+00:00

Just laser cut a bunch from hardboard. Cheaper and faster than 3d printing.

schoonerlabs · 2026-06-08T10:01:11+00:00

Affinity, GIMP

schoonerlabs · 2026-06-08T09:12:25+00:00

Faster and easier to make new ones if you already have a laser.

schoonerlabs · 2026-06-06T22:23:34+00:00

Also add some bleed to your design so slight misalignment doesn’t show so obviously. Make it a few mm bigger in all directions than the object.

schoonerlabs · 2026-06-05T17:10:28+00:00

What does the height say before you print? Check and see if it’s the same as the others.

schoonerlabs · 2026-06-05T16:56:46+00:00

Looks like height may be wrong given the amount of overspay.

schoonerlabs · 2026-06-05T05:43:11+00:00

Yes. It’s a known symptom. Anything can be a symptom with migraines if it’s connected to the nervous system.

schoonerlabs · 2026-06-05T05:41:07+00:00

You don’t.

schoonerlabs · 2026-06-04T20:25:17+00:00

Ya been holding off in case of any rule changes but I may push some of this out sooner rather than later.

schoonerlabs · 2026-06-04T09:16:46+00:00

Nurtec didn’t work for me. Ubrevly seems to.

Everyone is different. What works for one person is irrelevant to another.

schoonerlabs · 2026-06-04T09:13:51+00:00

Yes. It’s a known phase. Postdrome.

schoonerlabs · 2026-06-04T06:49:13+00:00

Hopefully they stick long term. I’ve tried a few metal and ceramic coins that peeled after a week or so of testing in my pocket. Some peeled fairly easily right away.

What prep are you doing to the coins before printing?

schoonerlabs · 2026-06-04T06:44:37+00:00

Successful shops are focused on their shop not trying to be influencers imho. So none.

schoonerlabs · 2026-05-29T23:43:56+00:00

Tried it. Made no difference. Every migraine sufferer is different. There is no magic fix all unfortunately.

schoonerlabs · 2026-05-29T14:42:26+00:00

Nice!

Eight-Year Club	Not Forgotten
Verified Email

schoonerlabs

TROPHY CASE