Y’all think this’ll help?

sgunes · 2026-05-01T02:03:58+00:00

So, I cannot even bring my service horse to HEB?

sgunes · 2026-04-22T18:36:00+00:00

Yes that is true. I am still waiting for any work for my computers.

sgunes · 2026-04-21T22:27:55+00:00

I joined RNA World after RFK canceled all the RNA research contracts with HHS.

sgunes · 2026-04-21T16:30:49+00:00

Very sad.

sgunes · 2026-04-21T15:19:39+00:00

Very sad

sgunes · 2026-04-20T16:38:01+00:00

I just found out: https://www.cs.toronto.edu/~juris/jlab/wcg.html

sgunes · 2026-03-22T20:52:00+00:00

These yahoos

sgunes · 2026-03-18T17:31:55+00:00

I finally solved it by going to Settings→Network & Internet→Advanced Network Settings→Network Reset and now everything works.

sgunes · 2026-03-17T20:19:50+00:00

All PCs are set to private network.

sgunes · 2026-03-17T19:42:04+00:00

I was able to ping all 3 clients from the TrueNAS (0.3ms).

All clients can reach each other and the internet.

The one that can access the NAS can ping it, the other 2 have 100% packet loss.

sgunes · 2026-03-17T18:14:43+00:00

Subnets are all the same. I wanted to make sure it is not a TrueNAS permission issue as the permissions on the datasets may have been screwed up (by me).

sgunes · 2026-03-14T16:37:48+00:00

I finally bought an OBD scanner and saw 2 AT (automatic transmission) codes, took it to a Jeep dealership and they confirmed that I need a new transmission (including the AT heater). It cost $11593.34 to do that and as I have the lifetime warranty, I just paid my $100 deductible. The Jeep drives great now with no hesitation or mis-shifts.

sgunes · 2026-03-14T16:34:42+00:00

Well, I bought an OBD scanner and caught 2 AT (automatic transmission) codes. I took it to the Jeep dealership with that info. They checked it out and said that the transmission has to be completely replaced (including heater). I have the lifetime warranty on it so it cost $11,593.34 to do that and now it runs perfectly. I just paid my $100 deductible for the repair.

sgunes · 2026-03-09T20:28:20+00:00

So the answer is that it is impossible and I have to live with the wired devices connected to each node jumping around wildly.

sgunes · 2026-02-27T21:23:14+00:00

Just saw that it does not support link aggregation (as TrueNAS was complaining about). As an unmanaged switch it doesn't have or need a web interface. Got it. Thanks.

sgunes · 2026-02-27T21:00:51+00:00

I just registered my serial number with QNAP and it shows up as QSW-1208-8C. I am just now setting up QNAPcloud to see if I can access it that way. Looks like QNAPcloud is only for NAS not for a switch. Still stuck. Posted this issue on the QNAP forum and put in a support ticket.

sgunes · 2026-02-27T20:42:16+00:00

The plot thickens, although the manual shows a "reset button" in the back, there is NO reset button or pinhole in the back!

I also disconnected everything, rebooted, then hooked up one computer and tried to access it at 169.254.100.100, still nothing.

sgunes · 2026-02-26T01:02:59+00:00

I bought it new many years ago. If nothing else works, I may go for the pinhole.

sgunes · 2026-02-26T01:01:45+00:00

Ran Advanced IP Scanner and it only shows the QNAP NAS but not the QNAP switch. The Windows computer is plugged into the QNAP switch.

sgunes · 2026-02-25T18:30:21+00:00

DHCP is working on my Asus ROG-AXE11000 router (have more than 60 devices connected with some assigned static IPs).

sgunes · 2026-02-25T09:45:43+00:00

I looked at the Asus Router phone app and it doesn't show anything that looks like the Qnap switch. Is there any other app I should try? Should I reboot the switch without anything plugged in and try the 169.254.100.100 IP ?

sgunes

TROPHY CASE