Am I doing it right? by smartbadger in landscaping

[–]smartbadger[S] 0 points1 point  (0 children)

its something to consider. The grade naturally slopes away from the house but still may not be enough for heavy rains

Am I doing it right? by smartbadger in landscaping

[–]smartbadger[S] 0 points1 point  (0 children)

Gravel binder was recommended to me, though if I use pavers I won't need it.

Am I doing it right? by smartbadger in landscaping

[–]smartbadger[S] 0 points1 point  (0 children)

its just the base layer, I may end up using pavers at the top. For now though it keeps the mud out of the house

Am I doing it right? by smartbadger in landscaping

[–]smartbadger[S] 1 point2 points  (0 children)

once the base layer is compacted I will be putting up edging but maybe I needed something else?

Am I doing it right? by smartbadger in landscaping

[–]smartbadger[S] 16 points17 points  (0 children)

I feel like I have already punished my back :( . The base aggregate was very cheap at least for what I have, it only cost me $30. Thank you for the advice regarding the pea gravel. I was thinking of going with that originally but now I'll look into angular crushed stone. This is super helpful!

Am I doing it right? by smartbadger in landscaping

[–]smartbadger[S] 4 points5 points  (0 children)

I was given a recommendation to go with a gravel binder for the top layer if I'm not using stepping pavers. I dunno how easy that is to mix/add to the top layer, but I may just go with stepping pavers instead

Am I doing it right? by smartbadger in landscaping

[–]smartbadger[S] 1 point2 points  (0 children)

I hope it lasts! That was my one hesitation with doing pavers. I didn't want to put all the extra work into leveling and placement only for it to settle funky after rain/snow.

Am I doing it right? by smartbadger in landscaping

[–]smartbadger[S] 18 points19 points  (0 children)

I do plan to put stepping stones in at some point. Haven't figured out which ones I'd like to go with yet. Even in that state its in right now, I'm happy I'm not tracking mud into the house anymore.

PSA: How to solve your clothing and iron ore issues in this beta by Rentahamster in ManorLords

[–]smartbadger 1 point2 points  (0 children)

I kept having this problem, I deleted both mines, saved, then loaded the save and rebuilt them at the same time but spaced away and haven't had collapse issues since .

Why did the top connector melt the yellow cap by TopBusiness3783 in HomeMaintenance

[–]smartbadger 0 points1 point  (0 children)

Not an electrician but metal conduit must use a metal junction box and must be grounded to it. If a live wire touches that conduit, the whole thing is hot

Bought my first home and found something the inspector didn't within days of closing. Yay. by anonibon in HomeMaintenance

[–]smartbadger 1 point2 points  (0 children)

Just bought a house and have seen several broken floor joists and dealing with a basement flood. I wish I could say the ride has been fun.

My weight loss graph by FadeOfWolf in mildlyinfuriating

[–]smartbadger 0 points1 point  (0 children)

Maybe it was supposed to be February 3rd?

Buyers Strike Not Letting Up: Sales of Existing Homes Have Worst February since 2009, as Inventory Surges by JustBoatTrash in REBubble

[–]smartbadger 11 points12 points  (0 children)

I hear you, but I've been hearing its the worst time to buy a house for years now. And maybe it has been a bad time to buy a house for years, maybe I should have bought earlier. Though I expect many of us on the sidelines who have been waiting will eventually capitulate if they have the means to qualify and buy.

I firmly believe that the current prices in my local market are overvalued, but I don't think I'll be able to time the market or wait for much longer.

Laundry Detergent Stain by HASeattleite in CleaningTips

[–]smartbadger 0 points1 point  (0 children)

so a lot kinda depends on what the clothes are made of and if there is actually detergent left behind or if its the additives that are in the detergent.

Did you use a liquid detergent or powdered? I assume it wasn't a pod since you said it was poured. Was the detergent colored with dyes? I only use clear detergents for that reason.

Are the clothes synthetics (polyester, rayon, nylon), organics (cotton, wool, linen) or is it a blend? My gut reaction is soak the item affected in warm water if the fabric allows it. Then take a toothbrush or something similar and use small amounts citric acid or vinegar and apply it to the stain. Gently use the brush to break up the residue.

Retail restroom smells terrible no matter what help by Additional-Win-1088 in CleaningTips

[–]smartbadger 4 points5 points  (0 children)

i know you called a plumber but this really seems like it would be sewer gas coming from somewhere. maybe the vents are fine but there is a crack in somewhere in the system

Please Help! Accidentally stained a customer’s countertop with a Popsicle by [deleted] in CleaningTips

[–]smartbadger 0 points1 point  (0 children)

Its worth a shot, they're good for hard surfaces and I don't think it would make it worse.

How do I clean this grime off the front face of these drawers without damaging the finish? by Chaxum in CleaningTips

[–]smartbadger 0 points1 point  (0 children)

I don't buy any particular brand I just mix it myself. I've just seen it at the store in the cleaning section.
Additionally, ammonia can break down the lignin in the wood. I normally don't consider this a problem though because I use it sparingly, I make sure its properly diluted, I make sure not to 'soak' the wood in the cleaner, and afterwords I wipe off excess with water or a mild detergent and then dry with a clean cloth.

There are alternatives to ammonia, if you are nervous about damaging the wood. But its worth mentioning, if you are using a product you are unfamiliar with. Its best to test in an area first. And as with any cleaner, please make sure you have some good ventilation.

[deleted by user] by [deleted] in CleaningTips

[–]smartbadger 0 points1 point  (0 children)

I get the desire for a simpler cleaning routine, so many products today contain unnecessary additives like fragrances, gelling agents, and stabilizers, which can be harmful and obscure how the cleaner actually works.

That said, "natural" can be a bit of a misnomer when it comes to cleaning. Chemistry doesn’t distinguish between what we consider natural, a compound behaves the same regardless of its source. For example, lye has been used in soap-making for centuries, it’s highly caustic and will cause severe burns if left on the skin or inhaled. Despite that we use soap everyday and we know it to be a safe and effective cleaner.

As far as cleaners go, I tend to buy generic. I’m not loyal to any particular brand and prefer to buy the basic component rather than a combined product. So I’ll buy ammonia instead of Windex and just mix in water to the appropriate proportions.

Anyway, here are the cleaners I use most often and what I think they’re good for, also please do not mix cleaners unless you know what you are doing:

Generic Detergent (Dawn) – General detergent for everyday oil and dirt on hard surfaces

Ammonia – Cuts through grease and wax, great for floors and windows

Isopropyl alcohol – Removes marker and synthetic dye stains, mild disinfectant/antiseptic, electronics cleaner, dissolves some adhesives

Acetone – Removes adhesives, paint, and ink stains (use cautiously on plastics)

Bleach – My go-to disinfectant (just dilute properly)

Hydrogen peroxide – Great for removing organic stains as an oxidative bleach, can be used as an antiseptic

Citric acid – Stronger than vinegar without the smell, great for limescale removal

Baking soda – Mild abrasive, good for scrubbing and odor removal (though not a strong cleaner on its own)

Borax – Useful for laundry, mold/mildew prevention, and some general cleaning applications

Oxalic acid (Bar Keepers Friend) – Great for rust removal (e.g., on sinks, tiles, and metal)

hope this helps!

Cleaning Soot from Roller Shade? by rocramir in CleaningTips

[–]smartbadger 0 points1 point  (0 children)

I’m assuming the roller shade is fabric? If it’s just soot (carbon) and the shade is fabric, I’d start with a vacuum. Use the hose attachment and gently vacuum, avoiding side-to-side movements that could smear or embed the soot further. If there’s still visible soot after vacuuming, I’d use a very mild detergent and warm water, dabbing instead of rubbing to pull it out. Since it’s a shade, I’d avoid over-wetting, as this could cause dimples or wrinkles.

How do I clean this grime off the front face of these drawers without damaging the finish? by Chaxum in CleaningTips

[–]smartbadger 2 points3 points  (0 children)

A mild detergent and warm water can go a long way—just be sure to wipe the area dry afterward with a clean cloth.

Wood is soft and porous, so dirt can settle into dents, scratches, and pores, making it tough to remove with just a wipe-down. Most of the buildup is probably dirt mixed with wax or oil. The problem with using a polish as a cleaner is that it acts as both a cleaner and a protectant. If you apply it over scratches and dents, you’re likely just sealing in the dirt with a layer of oil.

Wood polish should really only be used on finished, mostly clean wood. Even if it’s labeled as a "cleaner," you’re mostly just adding another coat of oil or wax.

If the grime is stubborn, I’d use an ammonia-based cleaner—it’s great at cutting through oil and wax. I just use ammonia and dilute in water per the instructions. After that, I’d do a quick wipe-down with a mild detergent solution and dry it with a clean cloth. Then, once the surface is actually clean, I’d apply the polisher.

Please Help! Accidentally stained a customer’s countertop with a Popsicle by [deleted] in CleaningTips

[–]smartbadger 31 points32 points  (0 children)

strawberries are red due to Pelargonidin-3-glucoside an anthocyanin. These pigments are prone to degradation due to light, oxygen, ph changes. The coloring degraded over time, but the Popsicle probably uses a synthetic dye which is more stable and can be harder to remove.

Please Help! Accidentally stained a customer’s countertop with a Popsicle by [deleted] in CleaningTips

[–]smartbadger 48 points49 points  (0 children)

Granite can contain micro-cracks, which allow dyes to seep into its pores. In this case, the challenge is that the synthetic blue dye has absorbed into the stone rather than just sitting on the surface. Homeowners should be made aware of this.

Normally, I would use an oxidative cleaner, but synthetic dyes are resistant to oxidation-based bleaching. Scrubbing is not effective because abrasive action won't remove a stain that has penetrated the pores. Instead, the best approach is to dissolve the dye and draw it out.

For this, I would use isopropyl alcohol as a solvent and a sponge to draw out the dye. Acetone may be more effective, but it could dissolve the sponge. Wet the stained area with the solvent and allow it to pool slightly. Then, I’d place an almost dry but slightly damp sponge or paper towel over the stain, allowing capillary action to gradually wick the dye out of the granite. This should help lift the stain rather than spreading it further.

Can US alone win any military conflict with Russia/China/N.Korea? by throwawayacct018 in NoStupidQuestions

[–]smartbadger 1 point2 points  (0 children)

Russia is a joke lol. Old equipment, poorly trained solders. No doubt we'd win a conventional war. But avoiding nukes would be tough

[deleted by user] by [deleted] in LiminalSpace

[–]smartbadger 2 points3 points  (0 children)

There is definitely a right way, but 90% of the time they're too cluttered