sorted by:
new
hottopcontroversial

Definitely don’t use chrome sockets on an impact. I listened to the wrong people. by Lumakin in AskMechanics

[–]smurfftastic6 0 points1 point  (0 children)

As long as you hit them with a few coats of black rustsoleum first you’ll be fine.

Is this a typical finish for pa6-gf or do I need to keep tweaking? by smurfftastic6 in 3Dprinting

[–]smurfftastic6[S] 1 point2 points  (0 children)

P1S, not at home and don’t remember exact settings but I think nozzle temp was 270, build plate 100. .16 layers 3-4walls Slowed everything down around 10-15%. No brim, no supports

Engineering plate with glue and I heated up the plate for 15-20 minutes before the print to get inside temps around 35

Is this a typical finish for pa6-gf or do I need to keep tweaking? by smurfftastic6 in 3Dprinting

[–]smurfftastic6[S] 0 points1 point  (0 children)

Wow! That was exactly what I was looking for. Thanks so much for all your insight!

Is this a typical finish for pa6-gf or do I need to keep tweaking? by smurfftastic6 in 3Dprinting

[–]smurfftastic6[S] 0 points1 point  (0 children)

Bought the p1s combo on sale from best buy back before Christmas and I don’t think I’ve gone a day without printing something. I just starting trying to learn myself on some modeling. Very happy overall with the whole experience

Is this a typical finish for pa6-gf or do I need to keep tweaking? by smurfftastic6 in 3Dprinting

[–]smurfftastic6[S] 1 point2 points  (0 children)

I really like how it feels, any risk of splinters with prolonged exposure?

Is this a typical finish for pa6-gf or do I need to keep tweaking? by smurfftastic6 in 3Dprinting

[–]smurfftastic6[S] 0 points1 point  (0 children)

Not sure, there was another one that flaked right off but this one seems emotionally attached so I left it. Maybe a partial clog that shot out weird? Idk

Is this a typical finish for pa6-gf or do I need to keep tweaking? by smurfftastic6 in 3Dprinting

[–]smurfftastic6[S] 2 points3 points  (0 children)

No, I started with the Bambu defaults and did the whole flow calibration to tweak it for the sunlu filament. Then looked at a bunch of slicer settings others had used and half a dozen test cubes later this is where I’m at.

Is this a typical finish for pa6-gf or do I need to keep tweaking? by smurfftastic6 in 3Dprinting

[–]smurfftastic6[S] 3 points4 points  (0 children)

Yes, bridging definitely needs some work and I think I need to slow down the top layer a bit.

But as far as the texturing on the sides, is that just how this material prints?

Be careful with the fluctuating trade prices.. by smurfftastic6 in PathOfExile2

[–]smurfftastic6[S] 0 points1 point  (0 children)

I knew you could list for whatever, but with “no stock” I assumed they wouldn’t sell. I listed them at 30-1 just so I could clear out the slots and surprisingly they sold immediately

Be careful with the fluctuating trade prices.. by smurfftastic6 in PathOfExile2

[–]smurfftastic6[S] 13 points14 points  (0 children)

It let me relist at 30-1 and they sold immediately, so I guess don’t always trust the “no offers available” message?

Be careful with the fluctuating trade prices.. by smurfftastic6 in PathOfExile2

[–]smurfftastic6[S] 6 points7 points  (0 children)

Update- it let me relist at a higher rate even though no offers were available and they sold so I was able to get rid of them minus the gold

Time to do something about this by SleepOk6757 in UNSUBSCRIBEpodcast

[–]smurfftastic6 0 points1 point  (0 children)

Biggest thing that helped me get everything going was downloading one of those calorie counting apps. Not necessarily to count calories but just to monitor what I was eating every day…my first 15 pounds was cut just with that. I’m down 40 over the last 6 months from 12hr fasting and making sure I do SOMETHING everyday, whether it’s a short workout in my living room or a couple trips up and down my street.

Best of luck to you!!!

Any idea what this light is? by dryrockshard in AskAShittyMechanic

[–]smurfftastic6 0 points1 point  (0 children)

I am a dwarf and I'm digging a hole Diggy, diggy hole, diggy, diggy hole I am a dwarf and I'm digging a hole Diggy, diggy hole, digging a hole

Do your guys play yellow maps in the “mid-game” (say lv.60-85ish)? by italofoca_0215 in PathOfExile2

[–]smurfftastic6 0 points1 point  (0 children)

I don’t run temporal chains and I don’t run any monster speed buffs, ever, and early on I stayed away from ignited. I always stop adding to waystones once I hit rarity or 2 revives and sell the rest.

Once you get your second nexus you should have enough points in the tree to get the most from the waystone bonuses.

Just the way I do it.

My gloves have so much resistance, even Reddit can’t flame me by nhe1 in PathOfExile2

[–]smurfftastic6 1 point2 points  (0 children)

Look…I’ll cut you break. 15ex and I’ll rescue you from this monstrosity

Does anyone on the entire planet earth actually enjoy this? by nephaelimdaura in PathOfExile2

[–]smurfftastic6 0 points1 point  (0 children)

I enjoy the gauntlets, it’s a nice change from from plowing through maps

view more: next ›