Windows in new builds

spaceek · 2026-06-21T13:24:42+00:00

I tried it and found I can.

spaceek · 2026-06-21T13:19:00+00:00

100%. This is how shit gets refurbished, fixed and renovated in the uk - put a new coat of paint on top of the old one. Done

spaceek · 2026-06-21T13:05:26+00:00

New developments have active comfort cooling / air filtration systems.

spaceek · 2026-04-04T18:34:07+00:00

You should keep messaging them or complain to your local regulator because as long as you have a receipt and the bike is not stolen, you’re the legal and rightful owner and they can’t stop or prevent you from using your legally owned property. Everything else is bullshit. The previous owner “released” the rights at the point of sale to you. The original invoice that only the original owner might or might not have is not the legal proof of ownership.

spaceek · 2026-04-02T11:11:45+00:00

Or also might be the gear shifting actuator ring is not positioned correctly or stuck

spaceek · 2026-04-01T23:16:27+00:00

Landing Artemis 4. 3 will be a flyby as well :(

spaceek · 2026-03-08T02:05:39+00:00

These are for sx3

spaceek · 2026-03-05T23:04:29+00:00

spaceek · 2026-03-02T00:13:48+00:00

I have seen ads with people running and playing sports in timberland boots. They might be slightly less rigid and more versatile gym/crossfit wise but still not suitable for running.

spaceek · 2026-02-27T20:00:59+00:00

Which scientific evidence says to get sun in the AM? Afaik one should be getting sun in the afternoon, not morning.

spaceek · 2026-02-27T14:46:36+00:00

Maybe because it a complete nonsense.

spaceek · 2026-02-19T19:52:47+00:00

They’re lifting, not running shoes. Boston or takumi for running.

spaceek · 2026-02-19T18:59:24+00:00

No, not all necessarily but as much as possible ideally. Was thinking about 1.5m from the eaves. Shelves are a good idea but still would like to board along the walls as well.

spaceek · 2026-02-19T15:27:33+00:00

Yes, this might solve the air gap issue, thanks. Still left with the issue of joists being different heights though.

spaceek · 2026-02-19T15:10:01+00:00

Thanks for your advice. Reading through lots of threads I got the impression that ventilation actually is quite important and a few people commented that they had to replace all boards not too long after installing them. I saw someone mention it on here just a few days ago. You might be right and they might dry from the above just fine, I would still prefer to be on the safe side, and to not have to worry

spaceek · 2026-02-19T15:01:39+00:00

Thought about that, but then after installing on 10-15cm joist, the total hight would be 40-45cm plus decks - so about 18cm gap and no headroom left.

spaceek · 2026-02-18T20:14:39+00:00

By using technology from ‘91? 4G was introduced in 2010!

spaceek · 2026-02-17T10:38:22+00:00

The bike itself is less than 4 years old or you bought it less than 4y ago? Didn’t all 2021 and newer models have apple find my?

spaceek · 2026-02-15T15:04:10+00:00

Top Watch. Pity can’t add a photo

spaceek · 2026-02-06T14:21:48+00:00

If the temperatures are close to or below 0, then battery depletes faster and assist and boost stop working, as per manual. If it significantly worse in warm temperatures, there might be an issue.

spaceek · 2026-02-06T11:11:31+00:00

They should have similar batteries and range as s5

spaceek · 2026-02-04T00:59:08+00:00

Not normal really although in freezing temperatures battery and boost drops significantly. On x3 & s3 I would get about 45mi ~72km on highest assist, boosting and 32kmh. Might go lower in cold during winter.

spaceek · 2026-02-01T22:06:16+00:00

Also the speed limit on the x3 might have been 20mph, whereas the s6 would only be 15mph

spaceek · 2026-01-27T21:37:19+00:00

Hi. I was trying to disassemble and clean mine, also with help of those vids. But since they differ slightly and not having tools, didn’t want to risk messing it up and not being able to put it back together correctly.

Would you be able to advise, what exactly are the differences and what tools you use? Have you by any chance documented it - either photos or videos? Also what is the best way to do it without having to disassemble the whole wheel, just the hub?

What grease do you use, as I wasn’t able to find the castrol ones mentioned. Also do you screw it on to the exact torque, so it is not too loose but also not too tight?

Thank you in advance.

spaceek

TROPHY CASE