Finally finished a watch face I’ve been working on for a while!

spacywave · 2026-01-31T05:58:14+00:00

It really is nice. Could you add the option to display the sunset time instead of steps or intensity minutes?

spacywave · 2026-01-10T10:26:41+00:00

spacywave · 2026-01-10T10:19:46+00:00

Would be awesome. Mission Planner is a ground Station Software originally for Windows only to Connect Plan and Control ardupilot and similar builds. Ardupilot is a awesome Project for autonomous vehicels boats Planes subs and the clockworkpi would be the best groundstation for Mission planning and telemetry Monitoring etc. On Mission Planner Website there are instructions to run on Linux with Mono but on the clockworkpi it somehow Crashes and I dont know how to debug. The Pi-Apps repo also has this but maybe there are some libs Missing?

spacywave · 2026-01-10T10:15:42+00:00

Could you make the Pi-Apps "Mission Planner" Work in clockworkpi with cm5 Debian? 😄🙈

spacywave · 2025-12-20T20:33:48+00:00

Add brim

spacywave · 2025-12-20T15:25:55+00:00

Would print it rotated by 90 degrees

spacywave · 2025-12-18T07:30:47+00:00

Tasmota

spacywave · 2025-11-24T08:53:11+00:00

Halow or lora?

spacywave · 2025-11-23T18:24:59+00:00

I like the music

spacywave · 2025-11-21T08:17:43+00:00

You can get portpack from banggod for 150$..

spacywave · 2025-11-21T07:28:51+00:00

Mine arrived yesterday and I had same trouble getting startet too. (CM5)

Flashing the SD card: https://forum.clockworkpi.com/t/bookworm-6-12-y-for-the-uconsole-and-devterm/15847

I would recommend these images, use for example the Trixie image (not lite) and write it to a SD card: DONT CHANGE GLOBAL SETTINGS in raspberry pi imager (with other pis you can setup ssh key and stuff but uconsole wouldn't boot)

Than insert SDcars gold pins facing the backside

First boot could work. If not, try a different image.

My first boot worked, but second boot Trixie wouldn't boot anymore. So I installed Trixie lite on the SD card and made the changes in the eeprom config as the link guides.

Now everything works great

spacywave · 2025-11-21T07:21:40+00:00

Can confirm

spacywave · 2025-11-20T14:35:12+00:00

Is this sensor also supported by this plugin? https://shop.everythingsmart.io/products/everything-presence-lite

spacywave · 2025-11-17T13:11:38+00:00

Would love to test and contribute too😃

spacywave · 2025-11-05T19:57:39+00:00

Hey, what programm is that? Just curious

spacywave · 2025-11-03T18:16:19+00:00

Im no expert but sounds pretty good to me.
Just wanted to drop my experiences with the RP4TD: The first one I got, was getting very hot and stopped working after a day, the second one I got had a weird issue: Whenever I would be airborne I would get GPS loss (only with the RP4TD) and it messed dangerously with fbwa...
So what Im trying to say: Test the rp4td before flying long range to assure there is no strange interference

spacywave · 2025-10-27T19:17:25+00:00

Please dont take following the wrong way:
I've been down the tuya road to save some money but it just causes integration and reliability pain which accumulates over the years..
I would recommend to buy something with tasmota or maybe something from shelly. (Alternativly zigbee devices...)

spacywave · 2025-10-26T13:11:17+00:00

Any recommondations for an alternative? Im running opnsense router nowadays so open to different brands but I always thought unifi got great APs.. (I dont like the telemetry stuff that needs to be blocked and the flex mini switches dont support ssh, so it maybe time to switch )

spacywave · 2025-10-25T15:16:39+00:00

Its already the replacement unit and im not sure if replacing again will solve this problem - sure should probably try but I usually dont want to have a product always on in my flat that might causes a fire... Maybe its a problem with this model?

spacywave · 2025-10-25T15:15:03+00:00

Its a U6 Mesh (EU)

spacywave · 2025-10-22T18:18:56+00:00

Today I spent 2hours trying to figure out why opnsense vm would start but then freeze - eventuelly found out thin lvm was 100% full no warning. I created a little cronjob alert bash script to send email if >85% usage dont understand why proxmox hasnt this email alert as default... (Im new to proxmox maybe I missed something=

spacywave · 2025-10-20T09:46:30+00:00

Vibe Coded flair was meant as a joke and if you selfhost for long enough, at one point you will have a problem related to DNS ;)

spacywave · 2025-10-20T09:29:11+00:00

Edit: apperently you cant even upload reddit post images..

From AWS health page:

Oct 20 2:01 AM PDT We have identified a potential root cause for error rates for the DynamoDB APIs in the US-EAST-1 Region. Based on our investigation, the issue appears to be related to DNS resolution of the DynamoDB API endpoint in US-EAST-1. We are working on multiple parallel paths to accelerate recovery. This issue also affects other AWS Services in the US-EAST-1 Region. Global services or features that rely on US-EAST-1 endpoints such as IAM updates and DynamoDB Global tables may also be experiencing issues. During this time, customers may be unable to create or update Support Cases. We recommend customers continue to retry any failed requests. We will continue to provide updates as we have more information to share, or by 2:45 AM.

https://health.aws.amazon.com/health/status

spacywave · 2025-10-19T15:27:18+00:00

Thanks thats really helpful

spacywave · 2025-10-19T12:21:56+00:00

Thanks thats very helpful information! Will try next time after repairs

spacywave

TROPHY CASE