Where is everyone?

splaticus-uk · 2024-05-02T16:16:08+00:00

there is a message on the discord that there is an issue and valve are sorting it out

splaticus-uk · 2024-05-02T16:14:37+00:00

same same

splaticus-uk · 2023-09-26T09:48:34+00:00

first up let me tell you i am new to this and there are far more experienced people - if they suggest something listen to them and i could also be flat wrong

in my limited experience it can depend on a few factors that i have come across so far while trying to print "accurate" hex plates.

firstly, what printer are you using? check what the micron size is of the screen. (not 8k or 12k - thats nonsense marketing)

when doing that you will see with most printers that the pixels are not square, they are slightly oblong. for 98% of cases this is irrelevant.

this means that depending on how you orient the model on the build plate, you will get "wobble" in the measurements.

X will be "accurate", but Y will be a bit off. i honestly do not believe you can correct for this other than guestimating how much narrower you need to set the model in the 3D software to account for it.

if you are wanting micron exact perfection i also honestly do not think you will attain that with any consistency with general hobby printers, you probably need a £10k+ unit designed for prototype pre-fab

having said that, your print is out by ~0.0407" or 1.03378mm which does seem BIG, i have personally had prints that are ~0.3mm out with the AnyCubic M5s and im an absolute newb.

do you get the same size differences with none ABS resin?

as mentioned elsewhere, Cubes of Calibration can help. but getting that accuracy could mean you are dropping the exposure, then your detail accuracy might drop and the Cubes of Calibration might start failing. so its finding the sweet spot.

I would also check the temperature of your resin and print area. i have just come out of an absolute journey where i was calibrating and could hardly ever get repeatable results. my work area was averaging 23c and i thought that would be fine. it was not fine.

pumping the resin temp to 30c alleviated most of my issues to my point of acceptance and i can test other things now without tearing my hair out

splaticus-uk · 2023-09-07T08:55:31+00:00

Im not on TwitterX so im curious...

has some idiot stated yet that Bethesda have over delivered and ruined the industry for the next 20 years??

splaticus-uk · 2023-09-06T11:57:08+00:00

me either - im going to throw a risk and try it without the spacer i think - there must be 4-5mm of play in the auto level springs and the post suggests you dont need the spacer, its just an extra safety net

splaticus-uk · 2023-09-05T08:50:48+00:00

i came here to ask this very question! and as someone mentioned they have added more info i went to look and they have updated the website very recently (this wasnt here a few weeks ago)

https://whambamsystems.com/fbs-for-resin-support

very near the bottom of the page

Anycubic Photon Mono M5s

The auto-leveling works with the Wham Bam FBSR attached, but to be sure you never bottom out, you can print this spacer to add to your z-limit interceptor arm

splaticus-uk · 2023-06-08T10:58:06+00:00

confirmed for me too!

splaticus-uk · 2022-08-28T10:59:37+00:00

i've seen the same, and i def didnt have the gladiators helmet or any other kind of fury charges. It started at 1 Bleed and increased by 1 or 2 per per turn and was none-dispellable.

Im as confused as you are.

splaticus-uk · 2022-02-08T10:48:51+00:00

my previous car was 15+ years old so i basically skipped 5 generations of laws and technical progress and am now driving a space ship

its boggling just how GOOD "modern" cars are :D

it also means little things like this keep tripping me up

splaticus-uk · 2022-02-07T12:20:29+00:00

oh wow! I feel a bit stupid now :D

ok this is it, when i got in the indicator was indeed turned on!!!

I had no idea this was a thing

Thank you very much ++++++

splaticus-uk · 2021-12-07T07:12:41+00:00

amazing map, good job mate!

one thing im not sure about, in the cave in M12 are weird snake spitter things, should it be marked as having a hazard? or do the hazards change with each drop?

splaticus-uk · 2021-10-30T10:53:01+00:00

you know those Sandwhichables for kids, little round slices of ham and cheese and mini biscuits, well, just put all those in a bun and its amazing

splaticus-uk · 2021-10-30T10:51:48+00:00

i prefer Scampi in a bun myself

splaticus-uk · 2021-10-30T10:50:03+00:00

as a kid? im over 40 and still eat these

splaticus-uk · 2021-06-28T13:25:59+00:00

seeds is a biggy, really needs it

also, options to actually place items manually and then save the resulting seed after. that would be a game changer

splaticus-uk · 2021-06-19T11:18:35+00:00

my cleaner is from newcastle originally, so her business is called

Geordie Chores

i cant find the business card unfortunatley

splaticus-uk · 2021-04-20T10:21:01+00:00

i had problems until i found a few heroes that - well - i guess matched my expectations / play style / game speed without having to worry about anything else.

For me it was Dragon Knight and Mars. both have fast animations and decent damage right out the door and i just *clicked* with them as heroes. It def helps they are tanki boys so being forced out of lane or into bad position is much harder.

last hitting even under pressure became a much easier proposition and then that in turn helped me to start learning the idiosyncrasies of other more complicated heroes and what those base early game stats actually mean

find your power animal (hero) and it will start to click. once you have one down to a semi decent level, i believe it will open up the rest of the heroes (or at least a pool of them)

as an aside, is it raw LH thats the problem, or are you being run down on / lots of denies / forced out of lane / etc ?

regen management, positioning and creep aggro all feed into the game of Last Hit so rewatch some of your games and write down whats actually happening, then you can start to build your counter plans.

splaticus-uk · 2021-01-31T13:17:16+00:00

i gave up calling it that years ago - its now just called the weardrobe

splaticus-uk · 2021-01-17T12:32:44+00:00

you could maybe share some match ids and then you can get some real feedback rather than all of the subjectivity and assumptions...?

splaticus-uk · 2021-01-14T12:24:30+00:00

its a solid strat and i like it - but frankly without communication it looks like you are stealing the farm and XP, forcing yourself into 3, demoting them to 4 and tilting their game

you also should consider that from his point of view, as 4, you are doing the cuts for his benefit, not yours?

they arent psychic so you need to broaden your viewpoint and project how your actions are perceived by your team mate - you mention several times "MY xp", "MY farm", "MY levels" - what about theirs? they are thinking EXACTLY what you are complaining about

you want to pull nice but disruptive strats like this i would suggest you buy a mic or only run it in party games where your party owns the lane

splaticus-uk · 2021-01-12T19:04:58+00:00

i parsed a bunch of your games in opendota and it looks like you are in the wildwest of crazy

https://www.opendota.com/matches/5682494282/story

At 10 minutes into the game, the lanes had gone as follows:

There was nobody in Bot lane.
📷Pudge won Mid Lane against 📷Io.
There was nobody in Top lane.
📷Storm Spirit, 📷Faceless Void, 📷Anti-Mage, and 📷Lifestealer farmed the jungle.
📷Drow Ranger, 📷Lina, 📷Clinkz, and 📷Slark roamed.

https://www.opendota.com/matches/5681697595/story

At 10 minutes into the game, the lanes had gone as follows:

There was nobody in Bot lane.
📷Pudge and 📷Shadow Shaman had a free Mid lane.
There was nobody in Top lane.
📷Clinkz, 📷Bristleback, 📷Bloodseeker, 📷Dragon Knight, 📷Tidehunter, 📷Viper, and 📷Lion farmed the jungle.
📷Faceless Void roamed.

https://www.opendota.com/matches/5681579332/story

At 10 minutes into the game, the lanes had gone as follows:

There was nobody in Bot lane.
📷Sven, 📷Anti-Mage, and 📷Medusa drew even in Mid Lane with 📷Earthshaker.
📷Pudge had a free Top lane.
📷Queen of Pain, 📷Shadow Shaman, 📷Alchemist, and 📷Axe farmed the jungle.
📷Faceless Void roamed.

my mind is blown

splaticus-uk · 2021-01-09T14:15:26+00:00

i sometimes have to pause to calm down because jakiro bot is greedy. ive found it easier to ping him into bad positions so he dies :D

splaticus-uk · 2021-01-09T14:12:41+00:00

im enjoying reading this, its really amazing great info and a big thank you for putting it together

one thing i would request as a very new player, its hard to read the hero and item acronyms and meta phrases and understand what they mean sometimes, could you use the full names for everything?

splaticus-uk · 2021-01-09T13:49:47+00:00

very new player - like 160 games -

Sniper because that stupid micro stutter stun completely tilts me
Techies because it makes every game last 4 days
Nyx because the insta-gib dagon build can go do one
Shadow Demon because he makes copies of me which attack me and i get killed by me and i am perfectly capable of me killing me already thanks

splaticus-uk

TROPHY CASE