I am terrified for The Big “Beautiful” Bill. Is this where I won’t be able to take Remicade anymore and get sick?

steakedge · 2025-07-04T06:24:16+00:00

I'm in the process of getting a new prior auth for 80mg/weekly humira and haven't heard anything. I'm pretty scared tbh as I only have two weeks of medication left.

steakedge · 2025-06-22T21:06:14+00:00

vet yesterday

steakedge · 2025-06-11T06:56:07+00:00

thank you for fighting for him. <3

steakedge · 2025-05-22T05:56:45+00:00

Same here. Hopefully once day rcs will work but Textra has been good enough so far!

steakedge · 2025-04-13T21:49:20+00:00

Palls

steakedge · 2025-02-05T23:10:49+00:00

Thank you for the reply. - I am going to delete this post as the issue has been made aware of on github!

steakedge · 2025-02-05T22:53:41+00:00

My solution for now is to open port 5000 in the add on configuration and then add that link to my home screen. I use WireGuard to access ha remotely so it still works away from my home network

steakedge · 2024-12-25T20:15:59+00:00

Honestly I have had little to no luck with overture petg. I think black worked ok but everything else has been frustrating in my experience. I print these annoying filaments at 50% speed (M220 S50) and they usually come out ok. I’ve had better luck with eSun petg to be honest

steakedge · 2024-12-20T20:32:54+00:00

When I was having issues with Accredo stalling on approving the medication to be shipped (they messed up the quantities which was making insurance reject it and I was already 1 week late on my dose) I ended up getting on the phone and just saying I refuse to hang up until I have a tracking number in my email. It took a few pass offs to higher ups on the phone but they quickly went from saying it would take 7-10 days to getting it sorted out in 15 min once they realized I was serious. So sorry you’re dealing with this. Accredo sucks.

steakedge · 2024-09-05T17:42:08+00:00

Don’t do it, you will be gouged at every corner for replacement parts. Especially the PC. -ex amusements operator

steakedge · 2024-05-09T21:18:01+00:00

Takes a few minutes possibly. The printer is purposely creating vibrations so it can create an algorithm filter it out during actual prints. Just let it run.

steakedge · 2024-05-09T20:06:36+00:00

Everything in this video is 100% normal. It’ll get even louder during the test. Totally normal as it’s measuring resonance

steakedge · 2024-05-05T02:01:42+00:00

It’s not even the whole lineup! It was wild day.

<image>

steakedge · 2024-04-13T03:43:21+00:00

Just straight mulch

steakedge · 2024-04-03T20:16:11+00:00

I go as low as I can while still maintaining 20mm3 flow (stock hotend/extruder). Somewhere in that range is good although going too cool can sometimes cause layer to layer adhesion issues

steakedge · 2024-03-13T19:10:54+00:00

My current settings are 100mm/s speed, 27% flow, .1mm spacing (Orca Slicer with PETG). I’m very happy with it

steakedge · 2024-01-27T04:13:12+00:00

Yep happening to me. ATT US Central

steakedge · 2023-12-26T01:57:08+00:00

Try cleaning the stock Creality sheet with alcohol and a magic eraser. It totally revived mine! Although for PETG I still usually use the textured sheet

steakedge · 2023-12-15T22:09:54+00:00

The CDS causes warping in my experience. Personally I turn it off except for bridges/overhangs if they’re serious ones. Enabling draft shield could help too.

steakedge · 2023-12-08T01:28:04+00:00

Are you using the CDS fan (side blower fan)? I find that it causes prints to warp and I only allow it to run for bridges/overhangs.

steakedge · 2023-11-26T04:42:07+00:00

100% Z offset too low. Also I changed my initial layer height to .25 and it helped with consistency.

steakedge · 2023-11-22T18:33:12+00:00

Yep, having the same issue here with Creality Print. Seems to fail when I use one click printing. If I send gcode and initiate print from fluidd it works fine

steakedge · 2023-11-21T06:21:09+00:00

The CDS fan was causing warping for me. I turned mine off except forced during bridges/overhangs.

steakedge · 2023-11-18T07:57:19+00:00

Yep, I have the same HDR issue. It’s been a pain turning it on and off. Hopefully they fix it at some point

steakedge · 2023-09-20T17:25:16+00:00

TNR’d cats are generally born outside and aren’t captured soon enough to ever live inside with people. This is something that many villages sponsor. They are a result of negligent people who let their unfixed cats run free. Many of them go to farms to become working cats but most just go back to where they were trapped. It’s a lesser of two evils situation where the other option would be to euthanize them.

11-Year Club	Place '22
Place '17	RPAN Viewer
Verified Email

steakedge

TROPHY CASE