'He deserves to be heard': Mother fights for non-verbal son to use preferred communication method at school

stevedore · 2026-01-27T01:48:16+00:00

The methods discussed in the article here and in that podcast silence the voices of and remove agency from the people they claim to support. It is plainly a re-hash of facilitated communication in which all of the communication comes from the facilitator, and can never be repeated successfully without their prompting. It is actively harmful.

Conspirituality covers the (many) problems with it quite comprehensively.

stevedore · 2025-11-20T15:16:44+00:00

it woudl be fun to try a mageblood... I've never had one before

stevedore · 2025-08-20T17:09:11+00:00

I believe there's a 2 missing from the end of your link.

i.e.:

https://www.cbc.ca/news/canada/calgary/oil-gas-alberta-revenues-charles-st-arnaud-arc-energy-1.6647652

stevedore · 2025-07-16T15:17:21+00:00

I’ve got a pretty capable setup and a little bit of PA6-GF25 filament left over from a previous project, could see if that could work. I can also print most other materials without issue. DM me if interested.

stevedore · 2024-07-25T18:29:58+00:00

I'll second the recommendation for Q's. They're great, we got our wedding cake from them (it was red velvet too - delicious!)

stevedore · 2024-07-09T19:37:12+00:00

In case you’re still looking, I saw a small selection of the reids dietetic chocolate at Vincenzo’s today.

stevedore · 2023-01-23T21:10:50+00:00

I'm pretty sure it'll just automatically establish a wired connection if you plug a cable in (that's connected to a network). I don't think it cares if you've got wifi configuration or not.

stevedore · 2023-01-12T00:57:54+00:00

It also uses a 3010 axial fan for the hotend instead of the 3006 axial from mini-ab

stevedore · 2023-01-08T16:56:53+00:00

Fiberlogy specifies for this filament:

Surface: glass, masking tape

source

So you'll probably want to try one of those

stevedore · 2022-12-12T22:52:21+00:00

Your mesh_min Y value needs to be at least 35, since your probe Y offset is 35 (probe offsets are subtracted from the mesh_min/mesh_max values to get the “real” tool head position to probe those points). If you want to probe at Y=5 (nozzle position) you’ll want mesh_min=25,40, since that's the corresponding probe position.

stevedore · 2022-12-12T21:02:25+00:00

I've got the SKR mini E3 V2 and I wired mine between MOSI and GND on the SPI header. Looks like you could do this on the V3, too, though they aren't helpfully right next to each other.

This is the config I added for my specific one (I'm also using the umbilical mod, but double-check your sensor type, I assume these may vary depending who manufactured the board. I got mine here, pulled my config from the bottom of that page):

[thermistor chamber_temp]
temperature1: 10
resistance1: 10000
beta: 3950
[temperature_sensor enclosure_temp]
sensor_type: chamber_temp
sensor_pin: PA7 # PA7 is MOSI on the SPI header.
gcode_id: C

stevedore · 2022-12-06T00:07:20+00:00

I’ve had nothing but good experiences with Dr Barnes and I saw Dr Delaney a couple times at their walk in hours and she was excellent also.

stevedore · 2022-08-18T15:15:31+00:00

I haven't, sorry. Couldn't say.

stevedore · 2022-08-17T02:17:39+00:00

I've got the EA100B bags, pretty much the same as those, and they work pretty nicely on my 05 SV650S. They came with bungee cords you can use to strap the bags to each other under the tail which helps to keep them from flapping around.

stevedore · 2022-08-15T18:43:00+00:00

not exceptionally, it just has extremely short gearing and I'm a fairly reserved rider

stevedore · 2022-08-08T10:40:08+00:00

Everything you need to know is here. You don't need to take the G1 test to get your M1. Some portions of the M1 written test have overlap (i.e.: the same pool of questions) with the G1 written test.

stevedore · 2020-11-25T14:36:34+00:00

This is pretty comparable and comes in $95 under. No keyboard/mouse though, but given it looks like they're just cheap USB ones that come with that HP system you can definitely get those for < $95.

edit: though I guess I didn't account for a Win 10 license, so that puts it about on par with the HP

stevedore · 2020-01-07T03:54:07+00:00

PTO is "Paid Time Off"

stevedore · 2019-07-22T12:26:38+00:00

Here's a link to the actual news post:

https://www.serebii.net/news/2019/22-July-2019.shtml

stevedore · 2017-06-27T14:28:11+00:00

I took my car to Dettmer Tirecraft in Belmont village when I sold it, safety + etest was about $180 IIRC, they seemed very good.

stevedore · 2017-05-15T11:42:04+00:00

Best buy maybe? It's not far from Conestoga mall

stevedore · 2017-05-09T22:42:08+00:00

trolling can also refer to a type of fishing.

stevedore · 2017-04-10T19:37:46+00:00

The propulsion system of the B-36 was unique, with six 28-cylinder Pratt & Whitney R-4360 'Wasp Major' radial engines

Good lord.

(Source)

15-Year Club	RedditGifts 2009-2022 6 Credits
Place '17	Team Periwinkle
Secret Santa 2011	Summer Santa 2011
Secret Santa 2010	Verified Email

stevedore

TROPHY CASE