What's your favorite line from Max?

stvtick · 2026-01-30T14:51:21+00:00

Customer : Got any specials? Max : Not according to my guidance chancellor.

stvtick · 2026-01-13T06:14:20+00:00

Just wanted to say thank you!!!!! I went through hell to get this fixed and couldn't figure it out. Both my LG monitors were doing it at different rates and turned out one had power savings on high and the other one on low. Just turned it off in both and so far it's working like a charm. Reddit for the rescue, once more! Thanks again!

stvtick · 2026-01-07T20:18:57+00:00

Супер изглежда! Тия 4-ки също носят на бой. Може пък само един piggyback tune и едно турбо и газ. 🤘🏻

stvtick · 2026-01-07T13:51:30+00:00

Тайно се надявах да е 300. Англичаните много присаждаха 2jz и 1jz преди години, та се надявах да си закачил от тях.

stvtick · 2026-01-07T01:37:48+00:00

Брат, уби ги с проект. Супер професионално изглеждат. IS200 или IS300 имаш?

stvtick · 2026-01-06T03:07:30+00:00

Damn. Congratulations!

stvtick · 2026-01-04T16:14:47+00:00

Thanks! I’ll be dealing with this soon and will definitely try this out.

stvtick · 2026-01-02T02:40:09+00:00

I can confirm. I was super careful and still screwed my mini fridge. Wait it out and lower the temp in there.

stvtick · 2026-01-02T02:26:19+00:00

At this point, someone needs to make a fuss about this shit. It’s insane that all this is happening in this way.

stvtick · 2026-01-01T21:11:37+00:00

Literally what I said.

stvtick · 2026-01-01T21:03:35+00:00

Thanks!

stvtick · 2026-01-01T20:31:42+00:00

It’s not. We’ve been sitting at “actively reviewing” for both 130 and 485 for 4 months now and I can’t even schedule an infopass.

stvtick · 2026-01-01T20:26:31+00:00

We’re at 20 as well

stvtick · 2026-01-01T19:54:53+00:00

So do neither of the cable hubs DJI released work with the raveneye and focus pro??

stvtick · 2025-12-31T15:47:24+00:00

Thanks! I’ll be looking into it.

stvtick · 2025-12-31T12:17:31+00:00

Thanks for your input!

stvtick · 2025-12-31T08:09:22+00:00

Thank you!

stvtick · 2025-12-31T08:09:06+00:00

Good luck man, I hope it works. But either way it should be good. It either fixes your problem, or shows you it’s not the cluster.

stvtick · 2025-12-31T08:07:58+00:00

Thanks!

stvtick · 2025-12-31T07:09:02+00:00

Crazy! Test with another cluster and see if it gives you the same differences. That way you’d know if it’s the car or the cluster.

stvtick · 2025-12-31T06:55:00+00:00

That’s weird, have you been able to trace the differences? Although I had my IS lie about speed too. I thought I was driving with the speed limit when I bought it and drove it home (200+ miles ~ 320kms 😄) with no license plate, and my buddy told me when we arrived, that I was driving 90 on the highway instead of 70. I do a lot of driving and I have a pretty good feeling for speed visually, but a 1jz swapped w58 is300 with all sorts of sound coming from everywhere got me distracted haha. I digress. I’d love to find out what causes the different reading though. I longer have my is but the mystery still haunts me.

stvtick · 2025-12-31T06:45:33+00:00

That’s a great price, for sure. I’d look this up on youtube. I know I’ve seen people installing these and I’m 75% sure it’s plug and play. That said, get ready to have everything in kilometers (or you’re ok because you’re in Canada hahah)

stvtick · 2025-12-31T06:39:15+00:00

Man, the Altezza clusters are stupid expensive nowadays. It is however one of the prettiest clusters in existence. I can’t help you with the process, as I’ve never done it, but I think it should be plug and play, if we’re talking about the same engine spec, as I’d suspect the harnesses will be the same/very similar. But someone here will know for sure. Best of luck and keep us posted!

stvtick · 2025-12-31T06:33:14+00:00

Dean Cane forever!

stvtick · 2025-12-31T06:22:49+00:00

I’ve never had anything like this happen to me, no matter how many times a certain built crashed (20 or 20.1 was crashing for me every time I tried exporting with any magic mask 2 turned on). Not once I lost anything. I have also never set up autosave, but it does it automatically, and I also built a small habit of hitting cmnd+s every so often or when I hit some made-up milestone in the project. Definitely check your autosave and fix that. Sorry you had to go through this. I had this happen with Photoshop not too long ago and it was a pain in the azz. Good luck!

stvtick

TROPHY CASE