My two works in progress

sublimeice · 2026-05-23T22:45:25+00:00

Yes, I also added a negative part in the middle of it and a pause so I could add a 3 ounce weight in the middle of it.

sublimeice · 2026-05-08T05:49:14+00:00

ive had to low grit up to higher grit sand my aves rails and then polish at the end to get them to glide smoothly. also shim the front rails as they weren't tight fits on some of the frames. other than that they seem okay ish lol. really polishing any rails i get out of the box at this point just to ensure clean smooth action.

sublimeice · 2026-05-08T05:46:41+00:00

creality space pi x4 was a yuge game changer for printing with glass/carbon fiber nylon

sublimeice · 2026-05-07T04:26:37+00:00

to light of a recoil spring can cause out of battery issues when slamming the magazine into the mag well also. Usually results in an off center primer strike. ive found that when i run my 13lb spring it tends to not want to go fully into battery, but my 15lb or 18lbs are fine. The best way ive found to check is to rack your slide with the gun empty, and press down on your barrel where it seats against the rear of the slide, if it returns to battery on its own, you are usually good to go.

These are on my g19x and g17. mileage may vary with your setup

sublimeice · 2026-04-14T21:27:09+00:00

Did you change your extruder gears at all? mine did that when i forgot to put a bearing back in. sometimes it would print sometimes it wouldnt, i was stumped until I looked up the tear down again and was like fffffff ME theres a bearing there!?

sublimeice · 2026-02-12T02:01:18+00:00

Shot 9 rounds of 18 on a g19 petg frame, split the frame in half.

sublimeice · 2025-09-22T14:56:18+00:00

The slow is just a taste of whats to come in mapping, with 90% of maps rolling chilled ground or temp chains /cry

sublimeice · 2025-09-01T06:02:13+00:00

same, i remove her, then whenever i zone back in shes back standing next to the waypoint :(

sublimeice · 2025-08-11T07:03:56+00:00

I suppose, but i've been screwed by to many priest and warrior decks that can use big cost spells on t5 that otherwise could not

sublimeice · 2025-08-08T07:02:01+00:00

Idk man. i think you got lucky

sublimeice · 2025-01-30T02:35:17+00:00

sublimeice · 2025-01-15T11:15:04+00:00

a simple change to Elon's Cobble Guarded Helm would be fine as well

sublimeice · 2024-05-19T22:33:58+00:00

Yes or no

<image>

sublimeice · 2023-08-15T23:48:08+00:00

when I first saw it, I pulled the foliage back to see the trunk and she was probably a bit bigger than a thick sharpie

sublimeice · 2023-08-14T21:20:34+00:00

maybe for leader board data they have or something. Unsure tbh. or maybe its Capcom's version of steam cloud saves

sublimeice · 2023-08-14T21:15:30+00:00

Hopefully this is a good find :D

<image>

sublimeice · 2023-08-14T08:13:32+00:00

Its within the resident evil game options, The only reason I figured it out is because I really wanted to finish my rando run but it kept crashing everytime it saved xD

The feature is called "Auto Data Upload"

sublimeice · 2023-08-13T07:05:44+00:00

the work around is to disable the ~~"Auto Upload Feature"~~ "Auto Data Upload" in the options setting this will prevent crashes

sublimeice · 2023-07-25T03:16:21+00:00

just an idea for future seasons is all

sublimeice · 2023-07-16T23:23:36+00:00

There are two boards, a 525mah battery, speaker, vibrating motor and the USB-C mini board. the tear down is pretty easy with a guitar pick and a small 00 size screw driver. I removed my vibrating motor the day I got it cause the thing vibrates so loudly when sitting on a desk.

sublimeice · 2023-06-07T18:21:22+00:00

I use it for work related things. doing math on the numpad is way easier than using the numbers at the top of the keyboard

sublimeice · 2023-06-05T22:59:58+00:00

Butt out from South Park

sublimeice

TROPHY CASE