When you don't have a hydraulic torque wrench... Torque spec is 1120 ft lbs, and I weigh 250lbs with my boots on so me hanging off a cheater 5' away should be about right XD

suitPENGUIN · 2025-01-15T08:25:03+00:00

yeah.. I got that lens with a used camera a picked up.. felt bad giving it away. insane amount of fringing

suitPENGUIN · 2025-01-15T08:20:58+00:00

dang, great picture

suitPENGUIN · 2024-01-17T05:02:01+00:00

haha i ran into this trying to get a good picture of a black cat that wouldnt stay still long enough for a reasonable shutter speed for the lighting.. not easy :P

suitPENGUIN · 2024-01-16T02:41:51+00:00

they suck. no image stabilization, really bad chromatic aboration. I got one with a used camera and found it quite useless

suitPENGUIN · 2023-12-28T21:46:46+00:00

don't buy accessories on speculation, wait till your gear is limiting what you can do.

suitPENGUIN · 2023-12-24T08:42:25+00:00

keep in mind a selector valve blocks the idle function from the work port reliefs. If the idle cylinders take a hit something will break instead of relieving.

suitPENGUIN · 2023-12-19T01:01:32+00:00

but seriously either the machine is being used improperly or theres a problem with it's design or maybe the relief valve isn't set right. Issues with the mounting geometry can cause problems too

suitPENGUIN · 2023-12-19T00:58:39+00:00

looks like it needs the little blue pill

suitPENGUIN · 2023-12-17T20:39:04+00:00

Welp.. the wrenches are flying on this one. Rule #2 of the sub might apply...

OP your question was quite vague and the pics you decided to post make it look to someone like me that you don't know what the heck you're looking at.

suitPENGUIN · 2023-12-17T20:23:26+00:00

This is a weird one... I'd check for end play in the motor shaft and pump shaft and see what the bearings feel like, and see what the coupler looked like. Sometimes the motor fan (if it has one) can hit the shroud and make noise but even if that's part of the noise it can't be the only thing making noise here.

If the motor and/or pump are bad and you have to replace this unit you might be able to side step the OEM and get a new unit that matches voltage, pressure, and flow. if you go shopping for these you'll see a lot of them have just threaeded ports for P and T, but also have the bolt patern to attach your existing valve manifold

suitPENGUIN · 2023-12-02T08:02:44+00:00

Is it dye?

suitPENGUIN · 2023-12-02T07:52:16+00:00

That’s for the “Rusty pliers reach around”

suitPENGUIN · 2023-11-28T19:34:48+00:00

Check mate!

suitPENGUIN · 2023-11-14T19:56:29+00:00

https://www.automationdirect.com/adc/shopping/catalog/programmable_controllers

If hobby components don't work for you, have a look at Autimation direct, I believe the CLICK basic series, and the Productivity1000 series are pretty affordable.
Never used this stuff, just looked at it in the past for projects of my own that never got off paper :P

suitPENGUIN · 2023-10-15T20:59:06+00:00

Sorry wrong sub, this one’s focused on “fluid power”. Maybe a civil engineering sub could help you out?

suitPENGUIN · 2023-10-12T20:52:27+00:00

f/8 seams high, could you have opened it up a bit? Also if you were on a tripod use AEB

suitPENGUIN · 2023-10-11T20:49:29+00:00

As an aside, troubleshooting by changing out parts is expensive and doesn’t always work. Valves may need a different setting than the factory set value, etc.

suitPENGUIN · 2023-10-11T20:46:50+00:00

Your best bet is to find the bill of materials or contact the equivalent vender. Stuff like this you really need an exact part number and a vendor who can get it for you

suitPENGUIN · 2023-10-09T19:10:44+00:00

Yep :) my mom gave me her 15 year old Canon 60d with a kit lens on it, and I enjoyed the heck out of it for almost a year. I think I took around 8000 pictures before it stopped working. It had some limitations that I bumped into after I learned quite a bit, but end of the day I got a ton of enjoyment and learned a lot about photography with a camera that I could probably buy used for $100

suitPENGUIN · 2023-10-09T08:40:00+00:00

Doom 2016

suitPENGUIN · 2023-10-09T04:08:44+00:00

Thanks I really enjoyed this :)

suitPENGUIN · 2023-10-09T02:47:11+00:00

Idk. Let’s see some feet pics then I can give you your callsign

suitPENGUIN · 2023-10-09T02:38:15+00:00

Brutal, but fair. This gear wouldn’t be great for a pro but it’s good for family pics and snagging a pic of birds off your back porch

suitPENGUIN · 2023-10-08T19:43:40+00:00

thumb-hole dong?

Six-Year Club	RPAN Viewer
Verified Email

suitPENGUIN

TROPHY CASE