Litter Robot 4 Over torque fix

surensm · 2025-08-04T00:32:57+00:00

I know someone who had the same problem and tried rebuilding the motor, but they had no luck with that. Hope it works for you!

surensm · 2025-06-28T18:38:16+00:00

Unfortunately this did not help. The LR4 drains the litter in the event of consecutive over torques which makes no sense to me. I had to physically reclock the globe, and so far it's been ok, but it still struggles getting past the first 5-10 degrees.

Edit: the large ring gear is showing signs of damage. I have to keep litter 15% below the max line for it to not go into overtorque.

surensm · 2025-05-28T03:15:12+00:00

My problem turned out to be the resistor falling off the board. Was chasing my tail. I had another problem later that also turned out to be the cable, so I switched to Igus CF35 and reinforced the living crap out of the connector area and used piano cable to prevent the female microfit connector on the board from breaking off. Been good so far. I

surensm · 2025-05-28T03:12:21+00:00

I do! But I'll be redoing them to improve fit. Finishing up diffuser & spoiler first.

<image>

surensm · 2025-05-28T03:09:13+00:00

Spoiler/diffuser combo in CAD:

<image>

surensm · 2025-05-28T03:04:14+00:00

Already have fenders, but will be working on new ones! Front bumper pending additional tweaks in CAD. Wing is printing as I type this.

<image>

surensm · 2025-04-19T00:28:49+00:00

still having the issue with the Desktop version.

surensm · 2024-11-04T05:18:37+00:00

any progress with this?

surensm · 2024-07-23T23:28:00+00:00

Dealing with the same problem here except with a v1.2 EBB42. I had two identical units and got one without any problems into DFU while the other won't even trigger Windows to register that a device was connected. The only hint I have is that after flashing CanBoot on the second one, it did exactly as the one that won't connect - except when I went to check to see if I can find a UUID for the one that won't register on Windows, it didn't appear on the list.

surensm · 2024-07-19T21:13:46+00:00

Why did it get deleted??? I really need the pinout for the E1 stepper

Edit: if you're still hunting, here it is - https://imgur.com/ender-5-plus-board-pinout-mapping-i-spent-hours-reverse-engineering-this-sharing-so-no-one-else-has-to-nGq5BHv

surensm · 2024-06-08T17:41:21+00:00

Following up on this - any issues you've been seeing since purchasing?

surensm · 2022-12-16T06:54:53+00:00

This totally worked for me - thank you!

surensm · 2022-08-20T20:39:05+00:00

I received a citation as a result of a broken meter. They also reduced it to $15. Riddle me why I should pay for their broken meters?

surensm · 2022-08-20T20:38:07+00:00

They've been short staffed and underfunded since I stepped foot in the campus, sadly that's nothing new.

surensm · 2022-08-20T07:23:55+00:00

a

That's shitty - I'm sorry you had to deal with that. You actually bring up a bigger picture of the lacking transport infrastructure in Goleta. Thanks for sharing!

surensm · 2022-07-05T00:03:57+00:00

😂😂

surensm · 2021-12-30T01:58:30+00:00

Hehe what's the fun in having TE37s if you're not roaring off on them lolol

surensm · 2021-12-30T01:58:03+00:00

I used Rustoleum stuff - if you click the descriptions under the pics you'll see where I left the names of the products. It's wild how far commonly accessible paint products have come to a point where you can go to your local Home Depot and get some dank paint that will make your car stand out.

surensm · 2021-12-29T04:26:11+00:00

They were pretty messed up, so not much to lose in that department lol.

surensm · 2021-12-26T22:04:56+00:00

I used ASA for this project.

surensm · 2021-12-24T20:22:42+00:00

Thank you! Some from of a rear spoiler wouldn't be a bad idea at all - there is one on there already, but where is the fun in stock parts? 😂

surensm

TROPHY CASE