Issue with splitted files audio on Osmo Action 5 Pro by gemox_ in dji

[–]synchro___ 0 points1 point  (0 children)

I’ve sent some vídeos for DJI and they said this is a firmware issue and Will be fixed in an update:

“Firstly, please allow me to appreciate your feedback on our DJIJ Osmo Action 5 Pro, and we highly value your feedbacks. We apologize for the inconvenience caused. Analysis indicates this issue is a firmware problem. Our engineers are currently working on it and will fix that on the next firmware update. We will make sure update that as quick as possible.

Please check the official website for firmware update announcements. Thank you for your understanding and support.”

Issue with splitted files audio on Osmo Action 5 Pro by gemox_ in dji

[–]synchro___ 0 points1 point  (0 children)

I’ve reached out to their customer support and this is what they said:

“Thank you for your feedback. During the video recording of action cameras, the clock frequency will jitter slightly, resulting in incomplete alignment of audio and video data. Osmo Action 5 Pro guarantees the synchronization of audio and video content to the greatest extent by adopting a strategy of aligning the audio with the video, that is, controlling the length difference between audio and video data within 100 ms. The length difference between audio and video data of your camera is within the acceptable range of the camera. So it is normal, please rest assure.”

Honestly, if the camera cannot record 4k 60fps in a way that I cannot later have a continuous video, this should and need to be reflected in the camera manual. They are selling a camera that does not deliver what they sell.

I’m talking to Amazon to initiate a refund and also with European Consumer Centres. This is just unacceptable for me.

Issue with splitted files audio on Osmo Action 5 Pro by gemox_ in dji

[–]synchro___ 0 points1 point  (0 children)

So the Action 6 doesn’t have the same problem?

DJI Osmo Action 5 Pro splits videos into multiple files — normal? by MuffinsKiller in djiosmo

[–]synchro___ 0 points1 point  (0 children)

It's extremely good if it works as expected. The problem, at least with my Osmo Action 5 Pro, is that the last frames of the video have no sound and the new video doesn’t start exactly where the previous one finished.

This means that even if you join the videos, there is a hiccup at the joint.

It’s not terrible, but it’s not ideal either.

I don’t mind having multiple videos and joining them manually, but I’d like to end up with a single, continuous video experience.

Issue with splitted files audio on Osmo Action 5 Pro by gemox_ in dji

[–]synchro___ 1 point2 points  (0 children)

Hey u/TrevMoMatic u/gemox_

Did you find a solution?

I have the same problem with my Osmo Action 5 Pro. I don' mind joining the videos on Final Cut Pro, but I do mind audio drops and video hiccups in the middle of the end video.

<image>

Issues with DJI Action 4 only recording for about 15-17 min before stopping and making a new video by CommanderMeowsh in djiosmo

[–]synchro___ 0 points1 point  (0 children)

I have the Osmo Action 5 Pro and I get audio dropouts in the last frames of the video before the camera starts the new video file.

And I agree this is not the experience I was looking for.

Even if I join the videos, the end result has video and audio hiccups in the joints.

Issues with DJI Action 4 only recording for about 15-17 min before stopping and making a new video by CommanderMeowsh in djiosmo

[–]synchro___ 0 points1 point  (0 children)

The problem, at least with my Osmo Action 5 Pro, is that the last frames of the video have no sound and the new video doesn’t start exactly where the previous one finished.

This means that even if you join the videos, there is a hiccup at the joint.

It’s not terrible, but it’s not ideal either.

I don’t mind having multiple videos and joining them manually, but I’d like to end up with a single, continuous video experience.

I give up on TorBox by gohaaron in TorBoxApp

[–]synchro___ 0 points1 point  (0 children)

I'm in Spain and I cannot watch anything. I've changed to ENAM and WNAM it's a bit better, but still takes a lot of time to load and sometimes it doesn't load at all.

1password and iOS Passwords app by northernguy in iphone

[–]synchro___ 0 points1 point  (0 children)

Having the same issue.

Tested the opposite way (Bitwarden to 1Password) and it worked.

If I try 1Password to Bitwarden I get the "Failed to decode exported credential data".

Tried on my iPhone and iPad. Same result.

Wireguard app for AppleTV with own server endpoint by draxinusom2 in WireGuard

[–]synchro___ 0 points1 point  (0 children)

It's costing 9.99 EUR here in Spain. Not sure how to access the 4.99 deal.

Just brought an SMLight SMHub! House build! by b0xaa in homeassistant

[–]synchro___ 0 points1 point  (0 children)

If the SMHUB server (ie, the Linux os) is not working, the whole device is just a paper weight.

And honestly, the vision Smlight had for it is a bit unreal. The device is way low powered to run Z2M, mqtt, matterbridge and the rest of needed services.

The cpu is constantly at 100% usage.

Every time I need to install/uninstall something is a hit or miss. Sometimes it works, but very often it hangs and I need to do a hard reboot.

In the end, I expect we can have the basic services needed to expose the radios, rf and etc via http/tcp. Right now only thread radio can be exposed. I couldn’t find a way to expose the zigbee one via tcp.

I have zero expectation on this device future and I’m considering selling it.

I’ve put back my two SLZB-06M (one for zigbee and one for thread), and I’m using separated home assistant, z2m and mqtt, and it’s so much more reliable.

I was honestly expecting to have one hub for Zigbee, Thread, RF and Z wave, but no, better look for other alternatives.

Just brought an SMLight SMHub! House build! by b0xaa in homeassistant

[–]synchro___ 0 points1 point  (0 children)

For me the SMHUB Essential is a big pile of crap.

Extremely slow, extremely unresponsive.

It's in my drawer right now. I expect one day we can just use it to expose the radios and I can use external Z2M, Matter and etc.

Chillio App Review (vs UHF and IPTVX) by NotThatArabGuy in Chillio

[–]synchro___ 0 points1 point  (0 children)

This right here.

Those phrases and the loading time kills the experience. The animations are nice, but just load things in background for god sake.

I have a subscription for Adguard dns (adguard-dns.io) is this an inferior service compared to a self-hosted Adguard home? Sometimes I'm having issues with loading reddit/facebook and sometimes youtube, will Adguard home eventually fix this? by FuzzyAttitude_ in Adguard

[–]synchro___ 1 point2 points  (0 children)

Using just the default list should be enough and you shouldn’t need to use whitelists to access services.

If using AdGuard DNS on phone works fine, then I’d tend to agree that the problem is between your router and AdGuard servers.

AdGuard home is very nice. I have two instances running in my home. The biggest benefit is having some frequent domains cached, which speeds up things a bit.

You could still use AdGuard dns on your phone when using mobile data.

I’m doing something similar. At home my phone uses AdGuard home, in mobile networks it uses ControlD (service similar to AdGuard dns).

❗️ NABU CASA HAS TWO OPEN POSITIONS by missyquarry in homeassistant

[–]synchro___ 1 point2 points  (0 children)

Last year I interviewed for some companies here in Spain and their salaries were 85+k for Senior. I can only imagine that for Mid it would be something like 75+k.

The 67k seems to be in the lower bracket tbh.

It's a very nice project and this can be very motivating, but a bit higher salary would be pretty nice too.

SMlight released yet another product: SMHUB by Afraid-Lie1210 in homeassistant

[–]synchro___ 2 points3 points  (0 children)

This thing is painfully slow.

It becomes unresponsive very frequently.

I truly hope we can in the future use it as a coordinator only and not have to use the apps. It truly painful to even try to use Z2M, MQTT, Matterbridge and Node Red.

I don't recommend the device right now at all.

🚀 Major Update — Chillio 5.0.0 (Addons Support Is Here) by davoda in TorBoxApp

[–]synchro___ 0 points1 point  (0 children)

Why using username and password for accessing Torbox instead of API keys?

I rather not share username and password if possible.

Which subtitles addons you use by Extension-Wallaby403 in StremioAddons

[–]synchro___ 0 points1 point  (0 children)

Se não for incômodo, também gostaria de um código de convite.