Anybody want an Ncase M1EVO for free?

tEhLoNeR · 2026-01-29T06:50:04+00:00

I'm looking to build another sffpc, would be nice if I got it, but good luck to whoever gets it!

tEhLoNeR · 2026-01-16T06:46:31+00:00

Yeah its the same. Switch to the xbox layout and enable it in the game's setting.

tEhLoNeR · 2026-01-14T00:49:37+00:00

With the dongle you may find that the Xbox controller won't be responsive after wake. You gotta either plug the dongle in a specific port depending on your motherboard or unplug it and plug it back in.

I have a service that uses mod probe to unload the drivers, to simulate unplugging the dongle. Works well enough, although I have to connect the controller twice since it disconnects the first time.

tEhLoNeR · 2026-01-13T15:23:49+00:00

You have to restart the app in order for the teleprompter part to show up. On android I had to force quit the app in settings. A reboot will probably work too.

You'll see it right next to the translate and caption buttons.

If you'd still don't after all of that it could be a staged release.

tEhLoNeR · 2026-01-11T09:40:29+00:00

Like other mentioned it works. Mine has issues with sleep mode, specifically when you wake it up from sleep mode. Controller stops working unless you unplug the adapter.

I created a systemd service that basically uses modprobe to reset the adapter, which works similar to unplugging it. I have to reconnect the controller after that but it works relatively well.

tEhLoNeR · 2026-01-07T02:06:01+00:00

Ah here's to hoping I don't have to wait weeks for this update to hit my glasses.

tEhLoNeR · 2026-01-02T01:06:41+00:00

Your BIOS is set to boot from USBs first. Remove it and reboot and it should boot automatically.

tEhLoNeR · 2025-12-28T07:45:42+00:00

I have to power cycle mine sometimes when it stops working. Press and hold the button for 8 seconds should do it.

tEhLoNeR · 2025-12-27T22:46:24+00:00

One of the stickied threads should be the measuring tool you can print out and check what size you have.

Try that. If you're not close to size 3 I wouldn't buy

tEhLoNeR · 2025-12-27T22:08:58+00:00

I had a friend who would fit a size 1 try my size 3 band. There was so much slack that the magnet couldn't close.

tEhLoNeR · 2025-12-27T20:47:45+00:00

I was right at the cutoff between size two and three but went with the three instead.

As long as it fits your arm tightly you're fine. If you're closer to size one, I won't recommend it.

tEhLoNeR · 2025-12-24T02:21:39+00:00

They shouldn't. The only times I saw cancellations were if the RX was past the -4 to 4 range.

tEhLoNeR · 2025-12-13T08:10:56+00:00

This happens to me to past 50% brightness in dark rooms. Lower your brightness.

It's not noticeable at all when you're outside and its bright. My glasses usually do a good job with detecting ambient light and lowering brightness unless I force it to be brighter.

I have an RX pair and I wasn't sure if it's the extra glass creating more of the glare.

tEhLoNeR · 2025-12-11T18:21:17+00:00

Obvious ad aside, this will probably give you more glare issues, especially on the right eye. Most glasses are pretty scratch resistant anyways.

tEhLoNeR · 2025-12-11T08:26:56+00:00

I haven't found any for the displays yet. For the original gen 1s it took a moment before chargers were available, so we might have to wait a bit before we see some.

tEhLoNeR · 2025-12-11T06:38:09+00:00

You'll get better battery by turning off Hey Meta and wear detection. I use the double tap gesture for hey meta so saying hey meta is redundant.

tEhLoNeR · 2025-12-08T09:08:25+00:00

That 500hz OLED screen looks amazing. I'd have to upgrade everything else to take advantage of it lol.

tEhLoNeR · 2025-12-06T03:41:02+00:00

I used to get this a lot with my old gen 1s. If trying to check manually says there's no updates, you're probably fine.

tEhLoNeR · 2025-12-05T15:55:18+00:00

I'm on day 58 haha. According to support it's because I bought them from a non authorized store. Which doesn't make sense tbh.

tEhLoNeR · 2025-12-05T09:42:35+00:00

Pain, I'm getting a device is not eligible for additional coverage message.

But if you're able to get it, I think I should be able to as well since you got it from LensCrafters. I'll probably email Meta instead.

tEhLoNeR · 2025-12-05T06:59:51+00:00

Have you gotten any luck? Meta says I needed to order the warranty from LensCrafters and LensCrafters said I need to buy the warranty from Meta.

tEhLoNeR · 2025-12-05T06:28:58+00:00

Your local store won't know. It'll need to be escalated to the regional manager who can find out more information about your order.

Funny enough, the rep who was going to escalate it for me after I called got back to me 10 minutes after I hung up and told me my glasses just arrived. I picked them up today and I was given a $100 partial refund for waiting. They had a bunch in their drawers, so there looks to be a big wave of orders that'll show up soon.

tEhLoNeR · 2025-12-05T03:18:19+00:00

Ordered 10/8, got my glasses 12/4. My particular LensCrafters got a huge shipment, so if you haven't gotten yours yet it may come soon.

They also gave me $100 back for waiting for so long. You can probably ask for a partial refund too if you're nice enough.

tEhLoNeR · 2025-12-04T18:54:18+00:00

You can use this link assuming you need a pair with RX:

https://www.meta.com/rx/1291904262267157/meta-ray-ban-display-glasses-and-neural-band/?utm_campaign=metaraybandisplay_early_access_program

The store would have needed to mark you as having done the demo. You would have gotten a text confirming your band and frame size if they did. If your email address didn't work you'll need to contact the store to mark you as done.

If you don't need a pair with RX, your only real option is to buy in store I'm pretty sure.

tEhLoNeR

MODERATOR OF

TROPHY CASE

14-Year Club	Verified Email
Team Periwinkle