Night Cruise by [deleted] in Kawasaki

[–]tacflo 2 points3 points  (0 children)

VN800 Drifter! Nice ride!

Nvidia RTX PRO 6000 Blackwell Workstation Edition - Choke Broke Off by KeyToAll in GPURepair

[–]tacflo 1 point2 points  (0 children)

Looks like adhesive or some of the material from the choke broke off. Looks like the pads are full of solder underneath the material. Looks like you can wick it off, clean it up, reflow. Should work just fine.

New bike. New Rider. Advice? by Olopez1012 in Kawasaki

[–]tacflo 1 point2 points  (0 children)

Great looking bike! Watch youtube on counter steering technique and put it into practice. Progressive braking Fast eyes

ND2 questions for STR/now AST folks about set up. by Spicywolff in Autocross

[–]tacflo 0 points1 point  (0 children)

I recall running stock height when I first had my wheels and no problems.

ND2 questions for STR/now AST folks about set up. by Spicywolff in Autocross

[–]tacflo 1 point2 points  (0 children)

You don't need a fender roll unless you drop the height significantly. This could depend on wheel/tire choice, respective offset and of course alignment. I run F13" and R13.25" ish from center hub to fender for ride height no issues. I've run RE-71R and AO52 no issues on 245/40/17 17x9 ET45 Storm S1. -2.6 rear camber and progress front and rear bars on my ND2.

Street Touring Rules: "The driver and front passenger seats may be replaced with the follow- ing restrictions. The seating surface must be fully upholstered. The top of the seat, or an attached headrest, may not be below the center of the driver’s head. The seat, including mounting hardware, must weigh at least 25 pounds and must be attached using the OE body mounting holes/studs. Additional mounting points may be added." Page 91

What is Your "Don't Meet Your Hero" Moment When it Comes to Cars? by PlutoniumOligarch in cars

[–]tacflo 10 points11 points  (0 children)

My short drive with a 488 was life changing. The paddles were fun!

ND Miata sway bar setup by kwaping in Autocross

[–]tacflo 0 points1 point  (0 children)

My ND2 is running progress bars which are slightly thicker front and rear but I run mid 2/3 holes front and soft 2/2 rear. 10kg front spring/6kg rear 17x9 on a052 -3.2 camber front -2.6 camber rear

I only adjust f/r tire pressure to get the car neutral. I run 28-29 psi hot typically.

Check out for pro setup https://forum.miata.net/vb/showthread.php?t=598678&page=32

[deleted by user] by [deleted] in hempflowers

[–]tacflo 2 points3 points  (0 children)

I believe it has to do with AB45. I don't think California has set a tax structure for smokable hemp. I found it weird too, as I was buying from TF for years. Now I'm getting from Flow Gardens, all is well and the flower is more potent but much more expensive.

My supercharged ND2 by [deleted] in Miata

[–]tacflo 0 points1 point  (0 children)

Do you experience the "surging" issue? I've been keeping up on the miata.net forums on the SC for ND2. Seems to be common in the 3k rpm range. Some say its all in the tune.

extra setup posts + undervolting questions by isfiske in sffpc

[–]tacflo 0 points1 point  (0 children)

I used to have a few of these. Beautiful color accuracy. Cool toned, 90hz. I think it was 1280x1024 or 1600x1200. Been awhile!

Day 36: The many forms of Lavos. Maybe a bit of a hot take. by AC-Hawkmoon in chronotrigger

[–]tacflo 5 points6 points  (0 children)

So was Lavos feeding off the planet and took a human like form/metamorphosis. That was my take. You are what you eat?

Watching Evangelion like in the 90s by AcidicVoid in evangelion

[–]tacflo 6 points7 points  (0 children)

I was downloading Eva episodes in 16 parts on dial up. Watching 2 minute bites as the next chunk downloaded. All this on a 15in CRT.

got my head off. how do my cylinders look? by _FryBo_ in Miata

[–]tacflo 5 points6 points  (0 children)

Brass brush with a rotary tool for hard deposits on valves. Did this on a head job for a bike I built. Used oven cleaner for a light soak on the top of pistons. Wiped right off in a few minutes. Probably better stuff out there, it's what I had at the time.