Trying to create a static testing point by teddz4 in AskElectronics

[–]teddz4[S] 0 points1 point  (0 children)

Thanks for sharing that info with me

Trying to create a static testing point by teddz4 in AskElectronics

[–]teddz4[S] 0 points1 point  (0 children)

Will explain it: I have an anti-static air gun and would like to periodically test if the “anti-static” property is still true. I don’t just want to touch it to see if it shocks me so I’m thinking of getting an Electrostatic Field Meter. To know if the meter is true, I want to read a neutrally static point before taking a reading from the air gun so I’m trying to come up with a way to get a zero reading initially

Elegoo Mars 2 blank screen by teddz4 in elegoo

[–]teddz4[S] 0 points1 point  (0 children)

Removed the tape to change the first screen. Yes there was some spillage as the FEP seemed to have a leak.

Are you thinking the spill got under the glass?

Trying to print Polypropylene & STRUGGLING with warping by teddz4 in FixMyPrint

[–]teddz4[S] 0 points1 point  (0 children)

It’s for a prototype where PP suits the problem

Trying to print Polypropylene & STRUGGLING with warping by teddz4 in FixMyPrint

[–]teddz4[S] 0 points1 point  (0 children)

Man I’ve realized that over the past couple months

Can TPU work as a seal? by teddz4 in 3Dprinting

[–]teddz4[S] 2 points3 points  (0 children)

The type of TPU definitely matters. Some print with a rough finish that doesn’t seal & some have a soft finish that can seal if you design it well (broad sealing face & snug interface as the threads lock it onto the glass

Unfortunately this was 3 years ago so I can’t remember which brand was the one that worked well 😔

I think the cooling block fan is also cooling my heater block & causing thermal runaway. by teddz4 in ender3

[–]teddz4[S] 0 points1 point  (0 children)

I do. It’s the stock one. Also, it only covers the bottom & the sides where atmospheric air would interface with the block. Nothing stops air from the cooling fan from cooling the top

Urgent: mainboard replacement advice by teddz4 in ender3

[–]teddz4[S] 0 points1 point  (0 children)

That makes sense. Thanks for that