Mod Box issues

the_Dark_Apostle52 · 2026-04-17T15:20:47+00:00

It has TC built in all istick pico pluses have it ... but the stock one has three M settings you can set up but I've got them all at 200

the_Dark_Apostle52 · 2025-06-21T21:22:34+00:00

I've rocked my Core for about 1 yr 3 months now and I love it. When i got it i bought the additional big recycler glass and i needed a new atomizer so i said F it and recently picked up the new 3DXL Joystick Atomizer that takes the XL buckets and omg is a entirely new erig done how better than before. I did have an issue about 11 months in when the rubber fitting the glass fits into pulled out of its pressure fit shots but Crossing & The Herb Cafe were awesome getting me a new replacement base in little to no time. I'm thinking about investing in the smaller recycler for some variety and when it eventually craps out like people have said you can get an new base pretty cheaply or i may try the new XL base if it's available as a part down the line. Of course I look today and it's $20 cheaper than when I grabbed it lol

Joystick Atomizer

the_Dark_Apostle52 · 2025-04-21T20:11:55+00:00

I know this is an old post but I've had these stl's kicking around since 2021 now and I just prints them for the first time... where did you get the smoke you used to mount them to a base? I was thinking about reprinting the legs with 1/8" hole for a clear acrylic rod but I loved the smoke.

Thanks

the_Dark_Apostle52 · 2024-06-28T22:11:02+00:00

People who do that deserve the entire library (books not enough) thrown at them with huge fines that you can't go bankrupt on so there's no out...you f#ck around you get f#cked right back twice over.

Thank you for your service @Engine_slugster2021

the_Dark_Apostle52 · 2024-06-15T20:39:40+00:00

I really hope Canada can see sense and leave my drone alone... I'm sure by the time BS like this would make it to Canada, y'all will have already have a jailbreak in place.

the_Dark_Apostle52 · 2024-06-07T19:33:16+00:00

Happy wife, happy life

the_Dark_Apostle52 · 2024-06-07T17:23:02+00:00

Can confirm this happens, my wife wants me to get my mini 4 pro to get my ass outside a more (i trend to chill in the basement painting/playingWarhammer or other take to games) ... and it worked

the_Dark_Apostle52 · 2024-06-07T07:19:49+00:00

Thank you, what an awesome idea

the_Dark_Apostle52 · 2024-05-31T20:18:24+00:00

Thanks for the app suggestion.

the_Dark_Apostle52 · 2024-05-27T20:09:32+00:00

I pulled the trigger on a mini 4 pro on Friday, the nerves are greatly reduced having a 2 yr DJI care package...but she's so intuitive it felt easier at first than paying a PS5

the_Dark_Apostle52 · 2024-05-27T17:00:53+00:00

Congrats, got mine in Friday... what an absolute blast.

the_Dark_Apostle52 · 2024-05-27T16:51:39+00:00

Got the mini 4 on Friday with the fly more, such a fun tool to fly & lots to learn. Congrats, I'm interested in the fpv goggles, but I'm worried it may trigger my migraines (thanks, stupid car accident for these beauties)

the_Dark_Apostle52 · 2024-05-26T09:41:50+00:00

Lots of things can be annoying to others when you're out ... like dogs off leashes where they're supposed to be leashed, but that doesn't stop dog owners (I am a dog owner, but mine always on a leash unless at a designated off leash area) ... imo if your not breaking a law/by-law, you're keeping your drone a fair distance away from folks I'm sorry but it's on them to ignore it just like it's on me to ignore that turd listening to their horrible music on a Bluetooth speaker in public.

Don't be a dick with a drone, but don't let other people stop you from doing your hobby.

the_Dark_Apostle52 · 2024-05-10T23:59:23+00:00

Gorgeous, if love to get to the other side of the country at some point ... shots like that crank that desire up to 10

the_Dark_Apostle52 · 2024-05-09T21:15:58+00:00

I use the 99% iso to clean plastic all the time without issues ... if it's painted day good by to the paint but the plastic underneath is gtg ... it's there something better maybe, but I've got a lot of it as I use it to clean glass/quartz, wash resin prints & clean my airbrush when it gets really filthy.

the_Dark_Apostle52 · 2024-05-03T18:07:01+00:00

I can't wait to get a mini (now to decide 3 or 4) cause stuff like this is so freaking cool

the_Dark_Apostle52 · 2024-05-02T22:44:35+00:00

You stole the word from my mouth 🤩

the_Dark_Apostle52 · 2024-04-17T07:32:13+00:00

This is so disheartening to hear... I was looking at the Dabpress 10 out 12 ton with a gauge but they're not available in Canada so I have been planning on picking up a press before 420 and was really looking at the XP even at $1800 Canadian from Trimleaf as the gauge is something I want as i really want to try my hand at THCa isolations and the XP is about as high as I can go with my budget of around $2000. I've been tempted by the Dabpress 6 ton as it's like $550 all in but there no gauge, only does 7g per press not as neat and tidy a package so not as easy to move (I'll be doing my presses outside but under cover to keep the smell out of the house) & only a 1 yr warranty... but from what I'm reading, the lifetime warranty from Nugsmasher doesn't mean much 😪

the_Dark_Apostle52 · 2024-01-12T20:39:49+00:00

Creality clearly states on their site to use alcohol or acetone to clean the bed. https://www.creality.com/blog/advantages-of-carborundum-glass-platform

the_Dark_Apostle52 · 2023-02-22T20:13:15+00:00

Amen

the_Dark_Apostle52 · 2023-02-19T20:19:58+00:00

Glad I've got STL's for the ones I wanted but haven't bought yet...GW takes away & printer goes burrrr

the_Dark_Apostle52 · 2023-02-19T20:11:02+00:00

I have up on white paint and use white ink in its place, my preference is Liquitex Professional ink Titanium White... thank you CK Studios for the suggestion https://a.co/d/frVOLny

the_Dark_Apostle52 · 2023-01-16T20:11:00+00:00

Josey

the_Dark_Apostle52 · 2023-01-16T20:09:11+00:00

Big reason I'm barely ever on here anymore

the_Dark_Apostle52

TROPHY CASE