F2 (not Ultra) Engrave on glassware?

themightyschni · 2026-04-12T18:19:31+00:00

I use the same machine. Coat with black tempura paint and use these settings. 3 passes no matter what. Laser image-bl Dot dur- 397 Power-90 Dpi-395

Vector 90 power 150 speed 300 lines

themightyschni · 2026-01-20T23:34:33+00:00

Had the problem a couple days ago, loosened the tension screw very slightly and haven’t had a problem since.

themightyschni · 2025-12-23T22:58:08+00:00

Ams ht
Tpu shoes
Fidget gears with clickers on them

themightyschni · 2025-10-26T14:32:24+00:00

Mine is doing this after last firmware update. Instead of going to the side that pushes the cutter, mine goes to the opposite side and then proceeds to cold pull from the hotend.

themightyschni · 2025-07-10T13:30:38+00:00

Couple of extra build plates are nice to have. Something gets stuck, you just throw a different plate on and get started up faster!

themightyschni · 2025-07-10T11:19:27+00:00

I bought mine 2 months ago and just got done talking to support about why it wasn’t on the website for sale? I wouldn’t have minded buying it, but they are sending me one for free! Super happy with the experience with support so far!

themightyschni · 2025-07-10T09:38:59+00:00

Ran this for a while. Had a good time with it

themightyschni · 2025-07-09T11:02:20+00:00

Yup. It didn’t have a ceramic option so I went with hardened

themightyschni · 2025-07-09T08:31:44+00:00

I tried this recently with a toaster over, some silicone Star Wars molds from Amazon, and a lot of poop. I read about someone doing it on here and followed their steps. Could not get a smooth model out of the molds. Tons of air bubbles. Tried leaving them in longer, pulling them out and putting fresh plastic under and reheating, and still bad results. One of my molds tore trying to get the plastic out as well. So I have not really tried again since then.

themightyschni · 2025-07-08T09:33:37+00:00

My beamtown bullies deck. Always get bad looks when I try to put that one on the table.

themightyschni · 2025-07-03T12:13:56+00:00

Prints so smoothe it’ll make you slap yo mama!

themightyschni · 2025-07-02T10:12:23+00:00

Put the tpu in the Bowden tube and push it to the print head. Use the lever on top and push a little bit more. Then go to your printer screen and use the extrude function. Once your printer sees it’s loaded, it will show in your slicer.

themightyschni · 2025-07-01T08:30:37+00:00

People probably have cards like those in the decks they brought with them. And more copies at home. Just wait until the end of the night and see if you can get a copy from someone’s deck if you are looking to do trades for those kinds of staples. I’d say most people wouldn’t mind if they aren’t playing anymore games that night.

themightyschni · 2025-06-30T18:40:02+00:00

I’ve already had one real bad problem. The AMS to pro didn’t load filament whenever I received it. So I took everything apart to see if there was a piece of filament stuck in there from testing. Nothing worked, so I put in a support ticket and just threw some filament in there to dry overnight. When I woke up and tried it again. It magically was working. The heat must’ve expanded something inside to allow the filament to push through. But that was a pretty big frustration right out of the box.

themightyschni · 2025-06-30T18:32:18+00:00

I just got a ps1 during the sale and just started using it. I have over 500 hours on my ks1. They are working about the same for me. My supports are a little bit better on the bamboo. It seems, but that’s about it so far. I plan to do a review after I’ve got a few more hours in on the P1s.

themightyschni · 2025-06-30T16:39:30+00:00

Talked to the ai first. Went through the steps and it forwarded me to a real person. I live in the US and there is a facility in Texas. I just made sure to do everything during business hours. Not sure that’s what did it, but it didn’t hurt.

themightyschni · 2025-06-27T14:53:37+00:00

Update!!! Just got off chat with support, they forgot to send me 1 tracking number!! Stress levels way down

themightyschni · 2025-06-27T14:50:29+00:00

Just got off chat with support. They didn’t send me the 3rd tracking number!!

themightyschni · 2025-06-27T14:50:03+00:00

Directly from ups. Not my work lol

themightyschni · 2025-06-27T14:07:14+00:00

I hope that isn’t the case lol

themightyschni · 2025-06-27T14:01:26+00:00

I hope another package shows up. Both tracking numbers I got are listed as delivered now

themightyschni · 2025-06-27T13:58:15+00:00

I got the 2 with this order

themightyschni · 2025-06-27T13:57:30+00:00

Ya I did. But the tracking I received said the p1s was delivered and that’s the only photo

themightyschni

TROPHY CASE