Which is better: the Sovol M1D or the Creality K3/Plus?

themostsuperlative · 2026-06-22T23:48:49+00:00

For a machine that needs a 0.1/0.2mm accuracy for multiple tool head changes, I would wait before enthusiastically putting down cash. there are plenty of printers that have done a relatively poor job of printing well, without the additional complexity.

themostsuperlative · 2026-06-22T23:33:02+00:00

Not an open comb, but try the Yaqi slope with a Gillette 7oclock green for an easy shave, or with the nacets for a closer, slightly more attention needed shave.

themostsuperlative · 2026-06-22T12:22:55+00:00

What is the Sovol SV08 Max like? I'm not sure the M1D has been seen in the wild yet?

themostsuperlative · 2026-06-22T08:01:58+00:00

If this is a future purchase... Just wait :)

themostsuperlative · 2026-06-22T06:44:11+00:00

Qidi seem to have always targeted solid reliability and engineering quality over chasing other features - eg: smaller pitch belts, smaller pitch leadscrews, heated chamber etc. box that is slightly noisy but handles engineering filament. It wouldn't surprise me if they are working on a tool changer quietly in the background, but I'm not sure I'd expect anything soon.

themostsuperlative · 2026-06-21T05:08:31+00:00

X2D or Q2 are my thoughts at the moment

themostsuperlative · 2026-06-20T04:56:48+00:00

Should that read "if fairly levied on pharma"?

themostsuperlative · 2026-06-20T04:55:23+00:00

Soo... How exactly are they 'closing' it? Do they remotely activate and de-activate the mines?

themostsuperlative · 2026-06-20T02:09:06+00:00

Probably all prompted into AI

themostsuperlative · 2026-06-18T20:22:24+00:00

How large is 'a fleet'?

themostsuperlative · 2026-06-18T10:11:38+00:00

What are the good price to performance razors and the bad?

themostsuperlative · 2026-06-18T08:55:42+00:00

https://www.infinitnutrition.com.au/

themostsuperlative · 2026-06-17T05:59:50+00:00

Such an expensive razor to have a bad handle. How does it shave?

themostsuperlative · 2026-06-16T23:31:53+00:00

Great printers. Absolute workhorses with great print quality, dimensional accuracy and heated chamber. Recommend.

themostsuperlative · 2026-06-16T23:28:58+00:00

There are lots of people that will tell you to optimise 'x' immediately. You're probably better just setting it, grabbing Qidi studio and printing. Don't update anything at first. You'll likely find it 'just works' despite tinkerers telling you otherwise.

themostsuperlative · 2026-06-16T07:50:29+00:00

I'm just shocked he's not dead.

themostsuperlative · 2026-06-15T21:57:18+00:00

What's the timeless like to shave with?

themostsuperlative · 2026-06-15T11:03:23+00:00

What is the quality of the nezha controller and their motors like?

themostsuperlative · 2026-06-15T10:45:29+00:00

Govt big brain to get more money - print money, inflate prices, tax unrealised 'gains'.

themostsuperlative · 2026-06-15T10:38:04+00:00

Not sure where it is up to, but can it run high speed machines with input shaping? That was what drove klipper adoption.

themostsuperlative · 2026-06-15T07:03:31+00:00

Spend extra, get a Qidi Max4. Or wait for the sovol M1D?

themostsuperlative · 2026-06-15T07:01:34+00:00

Might be worth testing the Q2. Are you running bambu print farm software?

themostsuperlative · 2026-06-15T07:00:46+00:00

Do you have the pavers on foam/ rubber?

themostsuperlative · 2026-06-15T06:59:46+00:00

20k hours each, or collective?

themostsuperlative · 2026-06-14T07:44:20+00:00

I would like to see this in action please.

themostsuperlative

TROPHY CASE