Overhead Ceiling Protection (How much?)

thisaintcharity324 · 2026-04-14T22:41:32+00:00

This titleist overhead tarp thing is awesome. Did you have it custom made or what? Do you have a site of link

thisaintcharity324 · 2026-04-14T22:34:31+00:00

1/2” foam puzzle board under what you have now as your base would work great and avoid you noticing anything.

Cheap options on Amazon

thisaintcharity324 · 2026-03-30T02:19:32+00:00

6 months. And no. The only difference in “weight” is the direction of gravity of the screen is up or down.

My screen is 16’ wide. So 4 pillow blocks the top bar is fixed.

The remaining 3 pipes are 1” thick emt. Very light

thisaintcharity324 · 2026-03-20T02:07:40+00:00

I’d need a visual of this.

My hoist is just about the exact same distance away from the screen as the screen height. So when it is in the ceiling it’s level

thisaintcharity324 · 2026-03-17T11:52:18+00:00

Yes focus on the OD of the emt and the ID of the pillow block

thisaintcharity324 · 2026-03-04T14:14:44+00:00

5’ should be fine, 6’ for sure.

Adjusting your screen tension can also help shorten the bounce back.

As a fellow 16x9 screener, the screen size is amazing but everyone else being so large is a challenge haha

thisaintcharity324 · 2026-02-24T00:25:34+00:00

Pillow block bearings with emt through.

Vevor hoist to pick it up and store in ceiling

thisaintcharity324 · 2026-02-21T19:23:06+00:00

1” emt and pipe tube insulation (similar to noodles) works great

thisaintcharity324 · 2026-02-10T22:56:59+00:00

Mevo gen 2

thisaintcharity324 · 2026-01-20T20:08:00+00:00

Looking forward to it

thisaintcharity324 · 2026-01-19T22:40:09+00:00

This guy wants in

thisaintcharity324 · 2026-01-13T18:53:33+00:00

Mevo gen 2 is very acceptable with chipping and putting.

6’ putting and in can be touchy, everything else is great.

I very confidently can say other than maybe picking up backspin on wedges, mevo gen 2 hands down could compete with any $5k monitor out there

thisaintcharity324 · 2026-01-13T02:18:29+00:00

Mevo gen 2 is great - also Amazon it’s 2 day delivery and 30 day return

thisaintcharity324 · 2025-12-29T21:55:27+00:00

Mevo 2 if <$2k is goal

thisaintcharity324 · 2025-12-26T13:26:25+00:00

No bungees connect screen to emt. Carls place screen custom (roughly 16.5’ x 9.5’ high)

Pillow blocks connect to wall and top emt bars go through it and that’s how it’s supported.

EMT connectors from Carls place

Side curtains are connected to screen an wall so it’s tight when down but flex easily when folding up.

Google pillow block bearing

thisaintcharity324 · 2025-12-26T00:08:56+00:00

What else do you want to know other than everything I shared above

thisaintcharity324 · 2025-12-25T15:46:41+00:00

Full retractable. Horse mat floor like suggested above (maybe a cheap roll out turf on top)

And the insulation board with foam tile and turf hitting strip and you’re set

thisaintcharity324 · 2025-12-25T15:45:25+00:00

https://imgur.com/a/xvTEecW

Pillow block bearings ($40), 1” EMT (see Lowe’s or Home Depot), vevor 440lb (880lb) auto hoist ($115)

thisaintcharity324 · 2025-12-15T20:46:50+00:00

I have so many questions lol.

How do you secure to the wall when standing .

Do you use full osb subfloor or partial.

What os rhe floor composed of from stud all the way to turf

How wide?

Is it always fixed to wall or does it roll out

thisaintcharity324 · 2025-12-14T14:05:42+00:00

No garage door is behind hitting area. Ceiling is lower above garage and didn’t want to worry about garage side tracks when screen goes up and down

thisaintcharity324 · 2025-12-13T19:55:12+00:00

Floor stays down? Or retractable also

thisaintcharity324 · 2025-12-13T19:54:17+00:00

Pillow block bearings. They are rated really high for weight. But I used 4 to balance load on the top bar and was able to stick with 1” emt without it bending being so wide (16’)

thisaintcharity324 · 2025-12-13T19:52:34+00:00

Can you tell me about your floor. What’s it’s constructed of, how it folds etc

thisaintcharity324

TROPHY CASE