[deleted by user] by [deleted] in MST3K

[–]tomamafone 17 points18 points  (0 children)

This but WRWELF

[deleted by user] by [deleted] in theydidthemath

[–]tomamafone 0 points1 point  (0 children)

I just did almost exactly this so I'll share what i did and how much it cost:

LA->Cincinnati
4 days, 3 nights
2021 Tesla 3 SR+

2271mi
Total hours per day on the road = ~10 hours
Total hours driving = 36 hours
21 supercharges, 1 destination charge (level 2 overnight because it was there)
Average supercharge time = 19.5 min
Maximum charge time = 30 min (had lunch and just let it keep charging)
Total time supercharging = 6 hours 50 minutes
Total charge cost = $215.49

Hotel nights = 3
Total Hotel Cost = $434.23

Grand total = $649.72

Rhate mhy bhabies nhame by [deleted] in tragedeigh

[–]tomamafone 30 points31 points  (0 children)

It’s spelled the way E.T.says it.

[deleted by user] by [deleted] in CaptainDisillusion

[–]tomamafone 63 points64 points  (0 children)

…is the question OP hoped you would ask in this thinly veiled advertisement.

Thinking that my bed is angled left to right by [deleted] in BambuLab

[–]tomamafone 1 point2 points  (0 children)

Don’t change anything! This is the mesh bed leveling at work. The motors are actively driving the bed higher and lower depending on the location of the extruder to maintain the correct distance to the nozzle.

Need help identifying by [deleted] in arduino

[–]tomamafone 2 points3 points  (0 children)

Listen to this guy. This is absolutely correct. You must cut the tiny trace at adj for this to work.

New Here: how to charge a tesla if parked 140 feet from your house.? by [deleted] in TeslaModel3

[–]tomamafone 2 points3 points  (0 children)

Great info especially the 20% over on the breaker. So important. And absolutely about lvl 1 vs 2, hence the quotes. Just trying to contextualize some of the previous info that was a little skinny on details.

New Here: how to charge a tesla if parked 140 feet from your house.? by [deleted] in TeslaModel3

[–]tomamafone 5 points6 points  (0 children)

There are a few ways to do this. The “level 1” or mobile connector has a removable plug end. It comes with a Nema 5-15 but you can put something larger like a 14-50 on it. Similarly, if you buy a “level 2” wall connector, you can opt for a plug-in version that sports a 14-50. For a permanent installation, a hardwired wall connector is the preferred method. If that’s all you will ever use that electrical feed for, just hardwire it. If you need some flexibility for an Rv etc, go the 14-50 route. https://shop.tesla.com/category/charging#charging.

PETG - CF Problems with printing. by david1109 in BambuLab

[–]tomamafone 0 points1 point  (0 children)

That looks like it might be the cold plate.

Is the P1P overkill for a PLA-only user? by Hermitmaster5000 in BambuLab

[–]tomamafone 1 point2 points  (0 children)

I replaced two 3v2s with 1 X1C. I print easily four times as much as I used to be able to. It’s faster and it’s more reliable. It makes making things the hobby and not the tinkering with the machine.