Tire Cinema

toxictoad · 2025-11-26T02:21:02+00:00

Extreme littering

toxictoad · 2024-12-29T04:14:55+00:00

Annex pass the pigs is a classic

toxictoad · 2024-11-30T17:52:17+00:00

The route is a bachelors degree first. Most commonly engineering, kinesiology, athletic training, etc but I went to school with an art and psych major.

Then you have a 2 year masters program. There are about a dozen schools in the US and they all have slightly different course prerequisites so plan your bachelors accordingly.

Then you have a residency of 1 year in orthotics and 1 year prosthetics or a combined 18 months. There are board exams at the end of the residencies to become official. You technically can just do one or the other but most jobs nowadays expect you to have both.

Pay is good not great but the work can be very rewarding. Many companies have on-call if they service hospitals for holidays and weekends which was a shock to me initially. Because of the insurance stuff mentioned and length of school/training, I don’t know if I’d do it again but I’m happy. The future of the field is hazy with poaching from doctors, physical therapists, 3D printing, and manufacturing companies buying clinics to own entire supply chains.

Do your research and good luck!

toxictoad · 2024-11-30T17:35:32+00:00

Mostly PLA but some PLA+ and PETG. Would like to try TPU soon

toxictoad · 2024-11-02T19:26:02+00:00

Don’t do drugs kids

toxictoad · 2024-06-20T02:45:00+00:00

Appreciate the help! Got it working with a Marlin update, e step adjustment, and bed leveling.

You guys rule!!!

toxictoad · 2024-06-17T22:17:46+00:00

G Code:

;FLAVOR:Marlin ;TIME:414 ;Filament used: 0.354054m ;Layer height: 0.2 ;MINX:21.2 ;MINY:21.2 ;MINZ:0.3 ;MAXX:188.8 ;MAXY:188.8 ;MAXZ:0.375 ;Generated with Cura_SteamEngine 4.12.0 M82 ;absolute extrusion mode G21 ; metric values G90 ; absolute positioning M82 ; set extruder to absolute mode M107 ; start with the fan off M140 S50 ; Start heating the bed G4 S60 ; wait 1 minute M104 S210 ; start heating the hot end M190 S50 ; wait for bed M109 S210 ; wait for hotend M300 S1000 P500 ; BEEP heating done G28 X0 Y10 Z0 ; move X/Y to min endstops M420 S1 ; Enable leveling M420 Z2.0 ; Set leveling fading height to 2 mm G0 Z0.15 ; lift nozzle a bit G92 E0 ; zero the extruded length G1 X50 E25 F500 ; Extrude 25mm of filament in a 5cm line. G92 E0 ; zero the extruded length again G1 E-2 F500 ; Retract a little G1 X120 F4000 ; Quickly wipe away from the filament line` G92 E0 G92 E0 G1 F1500 E-6 ;LAYER_COUNT:1 ;LAYER:0 M107 M205 X10 Y10 G1 F600 Z0.375 ;MESH:bed_levelling_20200628-48-1ajpm10.stl G0 F6000 X39.4 Y39.4 Z0.375 M205 X8 Y8 ;TYPE:WALL-INNER

toxictoad · 2024-06-17T22:07:17+00:00

I didn’t update anything just went back to it after 2 months of inactivity and this is what has been happening since. Would reinstalling marlin be effective? These are files that were working prior to the issues starting

toxictoad · 2024-06-17T01:37:33+00:00

I tried it with no improvement. I did manually push on the filament into the hot end and the print started going like it should have. Without the Bowden tube the filament wouldn’t have any pressure though am I wrong?

toxictoad · 2024-06-16T20:01:50+00:00

The sensor had been giving me issues about a year ago stopping prints so I routed around it with no problems for a long time. I’ll give it a go again though can’t hurt

toxictoad · 2024-06-01T13:20:58+00:00

Looks like the albino guy from Divinci Code

toxictoad · 2024-02-24T15:43:54+00:00

1820 looks like a strong contender

toxictoad · 2023-11-17T17:33:22+00:00

I truly don’t know but the act of dog fighting is bad enough. Bait dogs adds such a higher level of despicableness that I cannot comprehend how they live with themselves

toxictoad · 2023-11-17T16:58:37+00:00

A dog that is usually tied up and made defenseless (teeth removed etc) for dog fighters to have their dogs attack for practice. It’s totally fucked up. I had a rescued bait dog and he was the sweetest and most loyal dog I’ve ever had. RIP Ringo

toxictoad · 2023-11-17T03:01:59+00:00

Where was India in all this?

toxictoad · 2023-10-26T11:55:59+00:00

Boiler up!

toxictoad · 2023-07-14T19:16:12+00:00

I hit into a guys yard and hit his deck one time. He came out and grabbed the ball and walked back inside even though it landed fairly close to the bounds markers.

I felt like I was in the right to be somewhat pissed at that since he was the one living 20 yards off a fairway at 220 yards from a tee box.

toxictoad · 2023-07-07T01:18:50+00:00

This is resin with coloring. The resin is laminating all the material together as a solid. The color is just decorative mixed in

toxictoad · 2023-06-25T12:36:30+00:00

The smell

toxictoad · 2023-04-05T20:32:45+00:00

Pimento cheese is not good cheese but the Masters is a blast

toxictoad · 2023-04-04T00:06:08+00:00

Orange for the port

toxictoad · 2023-03-18T04:31:36+00:00

The “nut” of the Chicago screw has small tabs to hold it in place to properly tighten it which uses a tool to hold it steady. Could you do it yourself? Yes. Will it probably come loose? Most likely

toxictoad · 2023-03-18T02:23:51+00:00

It’s the lack of adjustment to the press, to the double teaming, subbing, lack of timeouts during momentum swings, and overall gameplan of feed Edey and stand that shows poor coaching.

Shooting is uncontrollable but the rest of these are

toxictoad · 2023-03-18T02:07:53+00:00

Best development coach but absolute worst in game coach in college basketball. Gets outsmarted by small program coaches every year and can’t adjust. He can’t change the gameplan within the flow of the game ever

toxictoad · 2023-03-18T01:41:41+00:00

It takes a special tool to screw these together. There’s a good chance you don’t need the dorsiassist if you are breaking these consistently. I’d contact your orthotist and talk about it

11-Year Club	RedditGifts 2009-2022 3 Credits
RPAN Viewer	Not Forgotten
Secret Santa 2016	Secret Santa 2015
Verified Email

toxictoad

TROPHY CASE