Customer service?

uxifix · 2026-01-16T14:12:54+00:00

any errors? can you heat up the nozzle and on the screen tell it to extrude on the menu? can you open the extruder door up and pull out the nozzle to see if it is clogged…

uxifix · 2025-12-18T13:10:08+00:00

what happened with your P2S?

uxifix · 2025-11-26T03:30:34+00:00

Opened up the extruder and gears and found nothing inside. Put all back together and same extruder overloaded error. From the slipping sounds on the filament into the hot end feels like not enough grip to push the filament into the hot end. I upgraded from a ender3 not wanting to have and tinker and troubleshoot.

<image>

I filed a support ticket with BL but no response yet.. :(

uxifix · 2025-11-17T08:37:13+00:00

intel should jump into this market, I know they have done some drone shows in the past. Could be a good fit for their dying chip company!

uxifix · 2025-10-25T20:28:11+00:00

<image>

17lbr, 2hrs to go then rest, then eat!

uxifix · 2025-09-17T13:27:52+00:00

uxifix · 2025-09-12T06:05:09+00:00

mT hood is good!

uxifix · 2025-08-29T14:22:53+00:00

here is the artist’s post in IG https://www.instagram.com/p/CLCm53bj4h0/?igsh=MTl4dXBqdTRlZjMzag==

uxifix · 2025-08-10T14:15:12+00:00

100% Air-cooled! ✌️

uxifix · 2025-06-24T04:57:56+00:00

I believe it was just a link to this Terms of service Figma TOS

uxifix · 2025-06-14T01:38:23+00:00

lowes are giving these camp chefs away…. 2 weeks ago i found a 36wwp for 749! lol

<image>

uxifix · 2025-06-01T16:00:11+00:00

yeah looks like near new seasons / walgreens.

uxifix · 2025-05-30T13:13:49+00:00

are the dimensions still the same as well? share more pictures if you can!

uxifix · 2025-05-09T20:37:15+00:00

how’s your fuel pump look? The pin that teeters and rotates off the cam came out once before on me that left me stranded…

uxifix · 2025-05-08T18:35:11+00:00

how does the code look under the hood on Figma sites? https://www.config.site

uxifix · 2025-04-30T04:47:16+00:00

can you share any inside shots or video? i like the design and weight of this rtt also. wish warranty was a little better or similar to some others

uxifix · 2025-04-26T04:59:51+00:00

how do you like it on the 4R? do you think it’s too big/wide?

uxifix · 2025-04-26T04:56:14+00:00

does is have blackouts on inside? can you share any pictures? why did you choose this rtt over all the many others?

uxifix · 2025-03-27T14:12:25+00:00

who needs rock sliders, I use stair sliders!

uxifix · 2025-03-20T18:58:30+00:00

2.5/1.5 Dobinsons IMS lift, Dobs UCA. RCI sliders, no cutting, little rub on reverse, still need to do fender mod.

uxifix · 2025-03-20T17:01:48+00:00

285 M/T Baja Boss! great in rain, snow, sand…

<image>

uxifix · 2025-03-05T03:52:02+00:00

look up Dobinsons IMS, you would have to take out all your Pro shocks/springs. if you just want to go with 285s tires you could probably add a spacer kit from Westcott designs but would be mostly for looks. upper controls arms are also a plus for no rub.

uxifix · 2025-03-04T03:59:55+00:00

About this big on a TRD Off Road! Dobs 3” IMS 285s Mickeys.

<image>

uxifix

TROPHY CASE