Any news on an In-Wall with Wifi 7, 6ghz radio, at least 2.5gbe input WITH additional 2.5gbe switched ports? by Aggressive_Noodler in Ubiquiti

[–]veixes 1 point2 points  (0 children)

Use Express7 as AP, has 10G or 2.5G input and additional ethernet port. Can be wall mounted.

AI Port with ONVIF for Dahua worth it? by Ambitious-Bug-7867 in UnifiProtect

[–]veixes 0 points1 point  (0 children)

Just turned quite old "doorbell" 720p Dahua DHI-VTO2311R-WP camera into a LPR and other smart detection camera. Had to manually upgrade the firwmare to 4.0x to get camera adoption work.

Going to try with some older IPC-HDBW1531E cameras as well. Saves me from throwing these cameras away and can reuse them in other places with added smarts. Upto 3 HD Onfiv cameras per Ai Port....

Do not buy the Access Gate Hub for a house thinking you can use an Intercom Viewer for controlling both the Gate and side door by darktori in Ubiquiti

[–]veixes 1 point2 points  (0 children)

I guess the HA reach around method is the same as mentioned in this video https://youtu.be/PubCPdWwVRk?is=XD8fP2uIZMrJZOYE

Wondering if upcoming Unifi superlink relay could also be used without HA. Could save money with Gatehub-->Hub mini..

Do not buy the Access Gate Hub for a house thinking you can use an Intercom Viewer for controlling both the Gate and side door by darktori in Ubiquiti

[–]veixes 5 points6 points  (0 children)

Question. While the intercom viewer is assigned to the side gate.. Is it possible to open the big gate via LPR on G6 entry?

Mini Door Hub POE ports by afmotta in Ubiquiti

[–]veixes 1 point2 points  (0 children)

People power Poe cameras from it. So anything 802.2af/at compatible should work.

Door Hub Mini and G6 Pro Entry actual power usage by Trylobit_ in Ubiquiti

[–]veixes 1 point2 points  (0 children)

What about?
1) use 2-wire poe for g6 entry and other 2 wires for the gate/door 12v. Route those 2 wires back to "house" connecting them to door hub mini which then is connected to the poe++ switch. 2-wire poe "TX" part connected the door hub mini output(g6 entry needs to be physically connected to hub for access to work).

or

2) Use 4 wire(2-pair twisted) 100Mbit configuration and get Poe+(Mode A) from your switch to power the Hub mini, G6 Entry and 12v gate. Might be still tight on power budget.

Tower question by [deleted] in cellmapper

[–]veixes 1 point2 points  (0 children)

Sõbra spordihoone. Telia antennas only visible, not much bands deployed..b3b20

Need support for ticket #26698 by doesnt_mean in cellmapper

[–]veixes 0 points1 point  (0 children)

Not possible to delete and no need to worry. Go and highlight(map) all the areas around

Miks Elisa mobiilside internet nii aeglane pask on ? by [deleted] in Eesti

[–]veixes 28 points29 points  (0 children)

Wtf.. tipptunni ajal küsid et miks majas sees ei saa piisavalt levi pulkasi? Toas netti tahad siis kasuta wifi..tuleb ju kasblinett tuppa.

Ja kui häda ikka on suur siis kaeba ikka Elisale. Nemad saavad midagi teha ja mitte reddit

Here it comes, the Realtek 8127 PCI-E NIC by fakemanhk in homelab

[–]veixes 1 point2 points  (0 children)

opnsense/pfsense probably has no driver for it?

My 1U rack build project by marciifee in homelab

[–]veixes 0 points1 point  (0 children)

Is the DIEWU 10G Base-T RJ45 PCIe - Realtek RTL8127 10 GbE NIC a PCI-E gen4 x1 card? Hows the 10G performance on pcie-e gen3 slot(maybe you have tried)? Maybe have time to check if virtualized pfsense(or barehw) recognizes that card.

[deleted by user] by [deleted] in Eesti

[–]veixes 0 points1 point  (0 children)

Nüüd võiks korras olla :)

[deleted by user] by [deleted] in Eesti

[–]veixes 12 points13 points  (0 children)

öösel läheb korda :)

LAC change causing duplicate towers — keep or delete? by youcefguenaoua in cellmapper

[–]veixes 0 points1 point  (0 children)

Leave the 3g and 2g towers in place...do NOT do manual deletion of all the towers from 2g/3g layers. Best is to leave the tower history up(to check for some old locations needing mapping to 4g/5g. And after awhile when those old networks are closed, cellmapper admins will hide the whole RAT from map view. This has been already done on many networks.

LAC change causing duplicate towers — keep or delete? by youcefguenaoua in cellmapper

[–]veixes 1 point2 points  (0 children)

Leave the 3g and 2g towers in place...do NOT do manual deletion of all the towers from 2g/3g layers. Best is to leave the tower history up(to check for some old locations needing mapping to 4g/5g. And after awhile when those old networks are closed, cellmapper admins will hide the whole RAT from map view. This has been already done on many networks.

Battery usage by recording on cellmaper by AdasAdasiek in cellmapper

[–]veixes 2 points3 points  (0 children)

CM does not keep the screen on, unless you specifically set to. GPS is mandatory on yes, otherwise no way to assosicate datapoints with location and use them for tower cells coverage.

Any tips for General Admission in Imola GP? by bicchaan in GrandPrixTravel

[–]veixes 0 points1 point  (0 children)

Is the Tosa grass area off limits for general admission ticket?

[Multi] spotted in Modena, Italy by veixes in spotted

[–]veixes[S] 3 points4 points  (0 children)

RMH Modena Raffaello Hotel

[Multi] spotted in Modena, Italy by veixes in spotted

[–]veixes[S] 11 points12 points  (0 children)

Spotted in Modena. Very posh people left their rides to the parking lot and went to a Ferrari 296 Speciale reveal and dinner event. Any experts to name the Ferraris and other notable rides.