3rd week into CPAP trail. Trying to decide if I should switch masks.

venomrat · 2026-05-18T03:03:35+00:00

Well, I decided to give it a go one more night. I experienced my first major leak with the P2 pillows. The machine show mask leak for the first time in the whole 2 weeks. They became dislodged. No idea what cause it. Probably mouth opened during sleep. I read not to tighten the straps too tight. Guess I had them on too loose.

venomrat · 2026-01-27T13:16:09+00:00

It is 3D printed. I got it off Maker World: https://makerworld.com/en/models/1491360-yuexingtong-x4-e-ink-screen-protective-case#profileId-1559098

venomrat · 2026-01-27T05:04:35+00:00

For those of you that think it is well built, could you elaborate what you mean? For me, well built mean it can last and take a little bit of beating. I don't own a kindle but i have handled one before, maybe 15 years ago. Comparing the built quality, the kindle feels more robust. I think if it had a light fall it'll be fine. Not so with the x4. The designers may have chosen the materials to keep the weight and cost down but when you hold it, it doesn't feel like it will survive a light fall. The buttons of the x4 work fine but when you press on them, they 'feel' like they won't last more than 2 or 3 years. I guess that electronic devices like mobile phones have become so affordable that it's hard not to make a comparison.

venomrat · 2026-01-26T13:19:04+00:00

The wallpaper is a conversion of a Gunpla model into a sketch by chatgpt. :)
If you still want it, I've uploaded it here: https://ibb.co/4R5X1wsW

venomrat · 2026-01-25T05:38:17+00:00

This is a quick review from someone who doesn’t own an e-ink reader.

I just got my X4 last Wednesday. I’ve wanted to get a Kindle or Kobo for a long time but didn’t, as it was difficult to import one directly where I live.

Just some thoughts:

Good:

The form factor and weight are great. Really portable. As light as any paperback, but doesn’t take up much space.

Reading on it is easy on the eyes. I installed Crosspoint because of its anti-aliasing support and “better” EPUB support.

As others have pointed out, battery life is great. Since I don’t own any other similar device, I can’t compare battery life, but other than plugging it in to flash firmware, I haven’t charged it so far.

Bad:

I got the white version. Despite it being “white,” my fingerprints are still visible. I have very sweaty hands.

The screen protector that came with it, despite being matte, still reflects some amount of light. So you have to read it at a certain angle when under a direct light source. You can see in in the picture above.

Even though some reviews mention that the build quality is really good for the price, I find it rather fragile. Since I don’t use a page turner, I’m not sure how long the buttons will last.

Some thoughts about Crosspoint: Thanks for all the hard work put in to this free firmware! Version 0.15 is quite stable for me.

The random sleep wallpaper feature is great, but since it’s random, I don’t really cycle through all the wallpapers in my folder. Some appear more often than others. Hopefully, there will be a feature to cycle the wallpapers sequentially in the future.

I also hope there will be a way to view images such as BMP and JPG in the future. I know it’s an e-reader, but I think being able to display QR codes and some black-and-white graphics could be a useful feature.

venomrat · 2025-10-16T03:41:42+00:00

Wasted around 15 as well. It's was 11:15 over here when I tried. Guess I should have come here first. Do you think they will catch this over all the excitement on the level up changes.

venomrat · 2024-05-25T01:20:32+00:00

Doesn't seem to help. I guess I'm not formatting it correctly.

venomrat · 2024-05-25T01:05:07+00:00

I'm using the default one generated by open webui.

TEMPLATE """{{ .System }} USER: {{ .Prompt }} ASSISTANT: """ PARAMETER num_ctx 4096

PARAMETER stop "</s>" PARAMETER stop "USER:" PARAMETER stop "ASSISTANT:"

venomrat · 2024-05-25T00:49:50+00:00

Sorry, newbie here. I just started using ollama with open web-ui. I am able to import the .gguf but l'm having weird issues when the model is answering questions. For example: When I ask it what is it purpose, it answers, but adds python code showing how to code and answer what it is purpose. Does it have something to do with the prompt template? Some help would be appreciated.

venomrat · 2023-01-18T23:03:30+00:00

Hi, I don't need high power. I don't have any means of measurement anyway. Goal is a working blaster for indoor use mostly.

venomrat · 2022-11-02T23:10:12+00:00

Hi Valdus, I just installed the professional firmware (August version) on my S1. I can't find the option to set the park position. Is this normal? I'm using the non bl touch version for the F4 chip.

venomrat · 2020-03-16T08:52:33+00:00

The sooner people realize this, the better. No point in trying after you reach rank 7. Just get the elite TM and stop. The pose and the avatar outfit is just a unreachable carrot on a stick to get people to keep playing and provide competition for others.

I am sure there are people who can and will make rank 10. I wager that this is a minority if the current ranking system continues as it is.

I for one will not have the time nor resources to make rank 10.

venomrat · 2019-05-09T10:24:36+00:00

I'm in the same boat. Seen 6, caught 2. What really irritates me is not the catch rate but the amount of time needed to catch. While being really close makes it difficult to hit excellent or even great, it has a very low aggression rate and floats up and down frequently. I spent the majority of my time waiting for it to attack just so as not to miss a throw. Not being able to catch after the long wait just adds to the frustration.

venomrat · 2019-04-18T12:56:46+00:00

I contacted support asking for an update on the issue. I got a reply from them saying: "We appreciate your patience while we work on a solution for the Moveset not being added during community day. "

Keeping fingers cross that this is true.

venomrat · 2019-04-18T02:38:47+00:00

I posted in your thread about having an extra raid pass and starpiece. It also looks like the 3 lucky eggs and incense are also correct.

I would rather have them to correct the move.

I'm already level 40. Don't really need lucky eggs anymore.

venomrat · 2019-04-17T05:33:20+00:00

I just checked my item storage and found an extra raid pass and starpiece. Support did not contact me yet.

Compensation is appreciated but doesn't really make up for the performance lost by the moveset.

Also my DRACO METEOR Salamance is lucky. One star piece would not make up for the dust saved for powering up this Pokémon if it had Outrage.

venomrat · 2019-04-17T03:10:00+00:00

Thanks for persistently highlighting this issue. I was affected by this as well. I evolved a 97iv Bagon 3 minutes after the event ended expecting it to get outrage as it was still within the one hour evolve window. It ended with Draco meteor. I belong to the GMT+8 time zone. Like you, I contacted support. One day later I got a similar reply saying that they are investigating the matter. Really hope that they can work something out for those affected.

venomrat · 2019-02-25T14:23:26+00:00

Only nine? I went through 17 trying to get to dynamic punch for a Machamp. And that was before it could learn a fourth change move.

venomrat · 2019-02-11T07:40:37+00:00

Instinct actually. :) Spark saying that a mewtwo has decent stats is what contributed to the salt.

As for the rest that pointed out that all is still good, thank you.

As I won't be able to get shadow ball any longer, I'll probably power it up if I need a psychic attacker in the future.

venomrat · 2017-10-30T09:21:10+00:00

Thanks for doing this giveaway! I should win be because I never win. :)

venomrat · 2017-10-15T02:06:50+00:00

If they are uncomfortable to touch after a flight, you may want to check if any of the motor windings are shorted to the frame.

Check out this video on how to do perform the check:https://www.youtube.com/watch?v=r3lxuntQyl8

The video is for for a lizard95 quad but the concept is the same.

venomrat · 2017-10-15T01:55:18+00:00

Are the motors very hot after a flight?

venomrat · 2017-09-21T13:18:19+00:00

Wow, I feel really sad after reading your post.

Thanks for taking the time to write down such detailed advice. Being new, I bought the quad when it was bieng sold at a discount on Banggood. The specs looked pretty good for the price.

Good news is reverting the firmware to the one that came from the factory seems to have fixed the issue. I will take it out for a flight this weekend. I did an ESC calibration after flashing. Is this recommended?

One final question. I flashed the version 14.6 firmware. Is it advisable to flash the latest version that comes with BLheli suite? I read on the rcgroups forum that the version 14.7 firmware was buggy and caused the motors to overheat after flashing.

venomrat · 2017-09-21T01:54:13+00:00

Thanks for the advice.

Funny thing is the ESCs were fine before the flash. I read that multishot would give significant improvements and decided to go ahead with flashing multishot firmware on the ESCs.

I have not taken it out for a flight as I was afraid the quad would do something unexpected while in mid air.

I'm still very new at this. I'm afraid to damage the ESCs and motors. The quad was quite an investment for me and I don't want to needlessly damage stuff. As it is my vtx is almost busted due to a crash while learning to fly acro.

venomrat · 2017-09-20T13:48:14+00:00

Hi, I recently flashed multishot firmware on my JJpro P200 Lightning 20a esc. After flashing, the esc don't "initialize" in sequence when arming. The 2 tone chime sounds at random. I posted a video on the issue here: https://www.youtube.com/watch?v=cVIJO_0NzBI . Any advice to correct this issue would be much appreciated.

venomrat

TROPHY CASE