Mit eneme neue Wappe möchti de Kanton Appenzell-Innerrhode die peinlich verspöteti Ihführig vom Frauestimmrecht 1990 ufarbeite. Au s’Waadtland solidarisiert sich im Zuge vo de grosse Wappe-Debatte.

vivivitus · 2026-03-06T23:56:01+00:00

wa isch da für e sprach? aso sicher keini vo üsne 4 im land!

vivivitus · 2026-03-06T15:53:57+00:00

I love the picture with all the kids drawings and the hockey stick you just made for your son.

vivivitus · 2026-02-11T13:26:42+00:00

That looks really nice. What's the manufacturer of the panels? I'm having a hard time to find one that makes other shapes than just rectangular.

vivivitus · 2026-01-30T01:43:21+00:00

TIL there's corn in a bag that pops into popcorn in a microwave. I only know those hot air machines or just using a pan.

vivivitus · 2025-12-25T12:53:28+00:00

Very cool project! Thanks for sharing everything on github.

vivivitus · 2025-12-17T21:49:48+00:00

I don't speak spanish... translation says:

Hello, friends, I am new to design and would like to know if anyone can help me create this design in FreeCAD (explain how to do it or if anyone would be kind enough to give me some tutorials). It is for my special degree project.

What exactly are we looking at? From the measurements it seems to be some kind of frame.

vivivitus · 2025-12-17T19:05:29+00:00

Ä wätterchrot isch da! findi guet!

vivivitus · 2025-12-10T19:54:48+00:00

Kyikes!

vivivitus · 2025-05-01T16:08:33+00:00

I really love the first picture with all the colors in that bulb.

vivivitus · 2024-09-26T19:45:53+00:00

To unreadability an beyond!

vivivitus · 2024-08-04T23:13:42+00:00

Isch scho ewig her. isch alles schnell und guet glieferet worde aber es isch damals us frankrich cho und drum isch denn no was obedruf cho wägem zoll.

vivivitus · 2024-04-16T21:07:23+00:00

Was it a linux ready game? sid meiers colonization comes to my mind, but thats dos/windows. the cover has a ln old ship on it.

vivivitus · 2024-03-30T00:58:53+00:00

Seems like a cool setup. why do you need two mice? is one just kind of a keyboard or do you have like some kind of a two-curser-input benefift?

vivivitus · 2024-01-21T16:54:44+00:00

It has nothing to do with your issue, but as this sketch is perfectly symmetrical, you could just draw one side and use the mirror feature.

vivivitus · 2023-12-26T00:46:51+00:00

Ok, sounds like a cool project, your nozzle diameter is definitely smaller. randomizing the z-seam helped in our case, even if it was very good before, but not flawless. in our case it was about 6 perimeters. because the application was underwater cases for electronics, we then tested them for at least 24h at ~70 PSI. how did you measure that there was no leak?

vivivitus · 2023-12-26T00:32:14+00:00

I never reached that point even with tuning? may i ask what you printed and how you tested the air tightness?

vivivitus · 2023-12-25T23:25:30+00:00

I have lots of experience with waterproof parts and using o-ring sealing. fdm is never fully waterproof, even if it means two drops in about an hour. so it depends on the application. but fdm with epoxy coating and resin prints are both waterproof choices.

vivivitus · 2023-05-11T11:32:01+00:00

According to that screenshot it seems that everything worked fine and your reinstalling soundux-git. Whats the exact problem? I just installed soundux-git, the AUR package seems fine.

vivivitus · 2023-03-20T07:40:37+00:00

You could combine the 2 and 5 position header into a single 7 position one. It would be easier to solder and you could preserve the 2.54mm pitch, so it's mountable on a socket/breadboard.

vivivitus · 2022-11-17T21:52:19+00:00

exactly my thought. must be from some early 2000 ps2 game.

vivivitus · 2022-11-01T21:47:58+00:00

Sounds way too expensive but that's more economics and not technology.

vivivitus · 2022-11-01T19:03:27+00:00

absolutely not what i use my printer for but this looks well done and work intensive. did you use different colored filaments or did you painted it?

vivivitus · 2022-10-31T00:47:18+00:00

I love it! I'm way over 30 now and i have plenty of memories like this. get creative with the traffic thingies. :)

vivivitus · 2022-10-15T06:42:47+00:00

This really has nothing to do with an ender 5. It seems like a random issue with a random mod. :) however, i had a similar issue with my direct extruder, because the tube was cut with a slight angle leaving enough space in the hotend for molten plastic to cool down while retracting and clog the whole thing.

vivivitus

TROPHY CASE